JAKO V8 Wireless Headset User Manual
- June 4, 2024
- JAKO
Table of Contents
V8
WIRELESS HEADSET
PRODUCT OVERVIEW
- Volume up and next track
- Power button and playback pause
- Volume down and previous track
- Short press to switch the microphone, Double press to switch the “Music/Game” mode, Long press to enter pairing
- TYPE-C charging port 10. 3.5mm audio cable
- 3.5 mm AUX connector 11. USB charging cable
- Microphone interface
- Detachable microphone
- USB wireless transmitter
SETUP
- CHARGING
To charge the headset, connect the USB charging cable to the Type C jack on the headset, and plug the other end into any USB power source (DC 5V /1A).
The color of the power LED indicates the battery status Charging: Red Full Capacity: Green Low battery : Blue (fast blink) and hearing a tone twice per minute Eco Mode : Headset automatically powers off if not pairing within 5 mins.
Note : The headset will be automatically powered off once charging. To protect the battery it is recommended to disconnect the charging cable once the battery full capacity. If it cannot be charged, please replace the normal charging cable. Standard fast charging cable is compatible with earphone charging, non-standard fast charging is not compatible with earphone charging.
- POWER ON/OFF AND PAIRING
POWER ON/OFF
To power on the headset press and hold the power button for at least 5 seconds. You will hear a tone, and the power LED will illuminate. To power off the headset press and hold the power button for at least 5 seconds, You will hear a tone and the power LED will off.
PAIRING
Note: The headset is already paired with the transmitter out of the box or if you want re-pairing press and hold the button for 5 seconds to hear the beep, power led from a blue slow blink to a quick blink then stable blue illumination, and transmitter indicator illuminates Green led.
PACKAGE CONTENTS
- Wireless Headset
- USB Wireless Dongle
- USB Charging Cable
- Detachable Microphone
- 3.5mm line-in Cable
- User Manual
SYSTEM REQUIREMENTS // COMPATIBILITY
- PC/MAC
- Playstation 4/5
- Nintendo Switch
HEADSET SPECIFICATION
| Speaker: 50MM | Transmission distance : >15 meters |
|---|---|
| Impedance: 320±15% | Microphone size : 6.0*5.0mm |
| Frequency: 20HZ-20KHZ | Microphone Sensitivity : -42±3dB |
| ,Output power : a20mW | Microphone pointing: unidirectional |
| Maximum power: a30mW | Low Latency: 22MS (Game Mode) |
| Battery capacity : 1000mAH | Low latency : 100MS (music mode) |
| Battery life with light: approx 18H | Charging interface: Type-c interface |
Super reset reset:
When plugging in the charging cable, press and hold the power button for 1
second, then release the button, and then pull out the charging cable and the
headset will automatically reset to the factory defaults.
(Note: The headset can be reset when it cannot be connected and used
under normal operation, otherwise it is not necessary to reset.)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>