tuya V2-S WT WiFi 2 Color 2 Wires LED Strip Controller Instruction Manual
- June 4, 2024
- Tuya
Table of Contents
tuya V2-S WT WiFi 2 Color 2 Wires LED Strip Controller
Feature
- Only apply to 2-wires WW+CW LED strip.
- Tuya APP cloud control, support on/off, color temperature and brightness adjust, delay turn on/off light, timer run,
- Scene and music play function.
- Voice control, support amazon ECHO and ImallGenie smart speaker.
- Match with RF 2.46 remote control optional.
- Each V2-S{VWI) controller can also work as a WikRF converter, then use luya APP to control one or more RE CCI LED Controller synchronoUsly. Connect with external
- push switch to achieve on/ott and C-100% dimming function. Switch 3 levels of color temperature|WW, NW, Cw) in consecutive power-on sequences. Fade in and out ettect selectable.
Technical Parameters
Mechanical Structures and Installations
System wiring
Note
-
The above distance is measured in a spacious (no obstacle) environment,
Please reter to the actual test distance betore installation. -
Please check if the Wifi router net in 2.4G band, the 5G band is not available, and do not hide your router network.
-
Please keep the distance between V2-S (W) devices and router close, and check the WiFi signals.
Wiring Diagram
Push Dim
Tuya APP network connection
Press and hold the Match key tor 2s, or push twice the Match key tasty:
Clear the previous network connection, and enter Smart config mode, the blue
LED indicator flashes fastly, and the output LED will lash 10 times.
Press and hold the Match key for 5s:
Clear the previous network connection, enter AP contig mode, and the blue LED
indicator trash slowly. smart contig tailed, please try AP contig.
Repeat power on and oft or consecutive times, also clear the previous network
connection, and enter Smart config mode, and the output LED will lash 10
times.
IF the Tuya APP network connection succeeds, the blue LED indicator will stop
and flash, and in Tuya APP, you can find the CCT device.
Tuya APP interface
Touch the color wheel to adjust color temperature Touch the brightness slide to adjust brightness.
V2-S(WT) match remote control (Optional)
The end user can choose suitable match/delete ways. Iwo options are offered for selection:
Use the V2-5(WT)’s Match key
Match:
Short press the match key of V2-S{WT), and immediately press the on/off key
(single zone remote or zone key (multiple zone remote) on the remote.
The LED indicator fast flash a few times means the match is successful.
Delete:
Press and hold the match key of V2-S[WT) for 10s to delete all matches,
The LED indicator fast trash a few times means all matched remotes were
deleted.
Use Power Restart
Match:
Switch off the power of V2-S[WT), then switch on the power, and repeat again.
An immediately short press on/off key (single zone remote or zone key
(multiple zone remote]l 3 times on the remote.
The light blinks 3 times means the match is successful.
Delete:
Switch of the power of V2-S[WT), then switches on power, and repeat again.
An immediately short press on/ott key Single zone remote or zone key (multiple
zone remole] 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
V2-S(WT) works as a WiFi-RF converter to match the RF CCT LED controller
The end user can choose suitable match/delete ways. Iwo options are offered
for selection
Use the controller’s Match key
Match:
Short press the match key of the controller, and immediately press the on/off
key on the Tuya APP.
The LED indicator fast trash a tew time means the match is successful.
Delete:
Press and hold the match key of the controller tor 5s,
The LED indicator that lashes a few times means the match was deleted.
Use Power Restart
Match:
Switch off the power of the controller, then switch on power and repeat again.
An immediately short press on/ott key 3 times on the luya APP.
The light blinks 3 times means the match is successful.
Delete:
Switch out the power to the controller, then switch on the power, and repeat
again.
An immediately short press on/off key 5 times on the Tuya APP.
The light blinks 5 times means the match was deleted.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>