hygger HG099 Crystal Aquarium Filter User Manual
- September 20, 2024
- hygger
Table of Contents
hygger HG099 Crystal Aquarium Filter
hygger Crystal Aquarium Filter is hung over the aquarium glass. The filter purifies and stabilizes the aquarium water by utilizing the activated carbon sponge insert and biochemical filter balls, thus creating healthy living conditions for the fish and invertebrates in the aquarium.
PRODUCT FEATURES
- Double-layer filter chamber for flexible use of different filter media.
- Smooth running. Vibration-damping support absorbs the vibrations of the pump.
- Activated carbon sponge inserts and biochemical filter balls effectively filter suspended particles, provide a colonization surface for beneficial bacteria, and stabilize the water quality.
- The extended outlet surface ensures more oxygen can be dissolved in the water.
- The water pump has a copper motor for a longer service life.
- The flow rate can be adjusted at the water outlet
- Automatic water intake, no manual starting aid required.
- Suitable for aquariums with a glass thickness of up to 0.7 inches(18MM).
PRODUCT SPECIFICATIONS
| Model | HG099-S | HG099-M | HG099-L |
|---|---|---|---|
| Power | 5W | 6W | 7W |
Volt/Freq
| ****
US standard: AC110-120V/60Hz EU/UK /AU standard: AC220-240V/50Hz
Flow rate
| 79GPH| 100GPH| 153GPH
(300L/H)| (380L/H)| (580L/H)
Size
| 4.5″x4″x11″| 5.6″x4.7″x15.9″| 6.7″x4.7″x19.4″
11.4CM(L)x10.2(W) X28CM(H)| 14.3CM(L)x12CM(W) X40.5CM(H)| 17CM(L)x12CM(W)
x49.4CM(H)
Recommended aquarium size| 4-21Gal(15-80L)| 10-30Gal(38-115L)|
20-50Gal(75-185L)
Model| Filter Accessories list (Standard)
---|---
HG099-S
| 1PC Activated carbon sponge insert| ****
None
| ****
1 Bag of biological media
HG099-M
| 1PC Activated carbon sponge insert| 1PC Black biological sponge| ****
1 Bag of biological media
HG099-L
| 1PC Activated carbon sponge insert| 1PC Black biological sponge| ****
1 Bag of biological media
PRODUCT DIAGRAM
INSTALLATION DIAGRAM
- Open the packaging and check the accessories for completeness.
- Connect the pump connector to the pump and press firmly upwards to create a firm connection between the pump and the connector shown in the figure.
- Attach the water inlet tube, extension tube, and filter sponge, insert the carbon sponge insert, and add the biochemical filter balls.
- Hang the filter on the aquarium glass and adjust the support foot.
- First set the flow regulator to the highest flow rate. The filter does not need to be filled with water. Connect to the mains – done.
- Reminder: To remove the upper filter basket, hold the connecting tube firmly and pull it upwards.
ATTENTION
- Before using the filter for the first time, please check that the rated voltage and frequency of the filter pump printed on the filter match your mains voltage.
- The socket should be located above the water line of the aquarium so that no water can accidentally run along the cable.
- For safety reasons, the appliance must be disconnected from the power supply when assembling or disassembling the filter and during cleaning.
- The plug must not get wet. For safety reasons, never touch it with wet hands.
TROUBLESHOOTING
DISPOSAL
Do not dispose of this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. Collecting and recycling waste is a way of saving natural resources. So, please consult with your local seller to make sure the product is disposed of in an environmentally friendly way.
CONTACT
- E-mail: service@hygger-online.com
- Website : www.hygger-online.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>