AZATOM Equinox 2 M4 Bookshelf Speakers User Guide
- June 1, 2024
- AZATOM
Table of Contents
AZATOM Equinox 2 M4 Bookshelf Speakers
Box Contents
LED Indicators and Buttons
Active Speaker
- Power Switch / Input Selection
- Previous Track
- Next Track
- Volume Control / Sound Effects
- Press in to navigate between audio sources:
- Music -> Dialogue -> Movie
- Treble Control
- Bass Control
- ARC Input Port
- USB Input Port
- Optical Input Port
- SUB Output Port
- RCA Input port
- Left Speaker Audio Output
- power Port
- Left Speaker Audio In
Know Your Remote
Connection Diagram
- Bluetooth
- USB (supplied)
- HDMI ARC (not supplied)
- Digital Optical Cable (supplied)
- USB/HIFI DAC (supplied)
- RCA to 3.5mm Audio Cable (supplied)
- RCA to RCA Audio Cable (supplied)
- Power Adapter (supplied)
Connecting with a TV
- A Method 1. Connecting using an Optical cable. Select Optical mode and set the TV’s audio output to “PCM”. (More information on PCM page)
- B Method 2. Connecting using an RCA to 3.5mm cable. Select RCA mode and set the TV’s audio output to “PCM”. (More information on PCM page)
- C Method 3. Connecting using an ARC cable. Select ARC mode and set the TV’s audio output to “PCM”. (More information on PCM page)
Setting “PCM” on your TV
When all cables are connected properly, and the LED indicator lights properly,
if there is no sound from the TV or Soundbar, please set your TV as below:
- Press “Menu” on the TV’s remote control.
- Press the arrow keys on the remote to scroll to “Audio Settings.”
- Press “OK” on the remote control.
- Scroll to “Advanced Audio” and press “OK”. Some televisions may not have an”Advanced Audio” menu and may list various audio settings instead.
- scroll to “Audio Output Mode” or “Digital Audio Output Mode” and Press “OK”.
- Scroll until “PCM” is displayed as the current audio output.
- Press “OK” to save the settings.
Connecting a Bluetooth Device
- Press the “BT” button on the remote or press the ” P/M” button on the back panel of the active speaker, the LED indicator blinks blue.
- Turn on Bluetooth on the Bluetooth device.
- Select “Equinox 2” and connect it. When your Bluetooth device is connected, the LED indicator blinks blue slowly.
- Play music files from the device, connected via Bluetooth, through the bookshelf speaker.
Specifications
Troubleshooting
No sound
- Check if the power indicator light is ON:
- Try to turn up the volume using either the master volume control or remote control.
- Ensure the audio cables are firmly connected and the input is set correctly on the speakers.
- Check if there is a signal output from the audio source.
- Cannot connect via Bluetooth
- Make sure the speaker is switched to Bluetooth input, in another audio input mode Bluetooth can not be paired or connected.
- Disconnect from any Bluetooth device by pressing and holding the volume dial in Bluetooth mode, then trying again.
- The effective Bluetooth transmission range is 10 meters, please make sure the operation is within the range.
- Try another Bluetooth device for connection.
- The Bookshelf Speaker does not turn on
- Check if the mains power is connected. or if the wall outlet is switched on.
THIS MANUAL IS AVAILABLE TO DOWNLOAD ONLINE AT
WWW.AZATOM.COM
AZATOM 2020 ALL RIGHTS RESERVED. AZATOM IS PART OF AZATOM GROUP LIMITED. SEE
SITE FOR SAFETY INFORMATION. AZATOM RESERVES THE RIGHT TO WITHDRAW ANY AND ALL
PROMOTIONS WITHOUT NOTICE. FOR FULL WARRANTY, EXTENDED WARRANTY AND
PROMOTIONAL OFFER TERMS & CONDITIONS PLEASE VISIT WWW.AZATOM.COM/TERMS-
CONDITIONS.
AZATOM GROUP LIMITED, TEES VALLEY COURT, WYNYARD BUSINESS PARK, BILLINGHAM,
TS22 5FE. UNITED KINGDOM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>