AZATOM Studio Pulse 2 Home Entertainment Soundbar User Manual

AZATOM Studio Pulse 2 Home Entertainment Soundbar

Important Safety Instructions

CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNE

• The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude as to constitute a risk of electric shock to persons.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Safety

1. Read these instructions – All the safety and operating instructions should be read before this product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow all instructions – All operating and usage instructions should be followed.
5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool and the like.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install by the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
12. Unplug the apparatus during lightning storms or when unused for long periods.
13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. This equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
15. The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.
16. The minimum distance around the apparatus for sufficient ventilation is 5cm.
17. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
18. No naked flame sources, such as lighted candles, should be placed on the apparatus.
19. Batteries should be recycled or disposed of as per state and local guidelines.
20. The use of apparatus in moderate or tropical climates.

Caution

• Use of controls or adjustments or performance of procedures other than those described herein may result in hazardous radiation exposure or other unsafe operation.
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on the apparatus.
• The mains plug/appliance coupler is used as the disconnect device, the disconnect device must remain readily operable.
• Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

Warning

• The battery (batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
• Don’t dispose of a battery into a fire or a hot oven, or mechanically crush or cut of a Battery.
• To avoid the battery being subjected to extremely low air pressure.
• Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
• Do not place this unit close to strong magnetic fields.
• Do not place this unit on the amplifier or receiver.
• If any solid object or liquid falls into the system, unplug the system and have it checked by qualified personnel before operating it any further.
• Do not attempt to clean the unit with chemical solvents as this may damage the finish. Use a clean, dry or slightly damp cloth.
• When removing the power plug from the wall outlet, always pull directly on the plug, and never yank on the cord.
• Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user’s authority to operate the equipment.
• The rating label is pasted on the bottom or back of the equipment

Battery usage CAUTION
To prevent battery leakage which may result in bodily injury, property damage, or damage to the apparatus:

• Install all batteries correctly, + and – as marked on the apparatus.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (Carbon- Zinc) or rechargeable (Ni-Cd, Ni- MH, etc.) batteries.
• Remove batteries when the unit is not used for a long time.

Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

• We hereby declare that this product complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.

• The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG,. Inc. and any use of such marks by Azatom is under license. Other trademarks and trade names are those of their respective owners.

Package Contents

• Power cord quantity and plug type vary by region.
• Images, illustrations and drawings shown in this User Manual are for reference only, actual product may vary in appearance.

Thank You for purchasing the Studio Pulse 2 for your home.

• To make the most of its features, we suggest reading the instruction manual thoroughly, which includes hints and tips to assist in resolving any problems. Please go through all the safety guidelines before using it and keep this manual for future reference.
• To learn more & Register for our Azatom Warranty. Please visit: www.azatom.com/warranty or scan the QR Code on the back of the Manual.
• Need Help? Contact our customer service team who are always happy to help! Open 9am – 5pm Mon – Fri
• Email: customersupport@azatom.com. Phone: 01740 629 901

Identifying the Parts

Soundbar

1. (ON/OFF) Button
   Switch the soundbar between ON and Standby mode.

2. (SOURCE) Button
   Select the play function.

3. +/－ (volume) Buttons
   Increase/decrease the volume level.

4. LED Indicators / Remote Control Sensor

5. AC~ Socket
   Connect a power cord.

6. USB Socket
   Insert the USB device to play music.

7. OPTICAL Socket
   Connect to an optical audio output on the TV.

8. AUX Socket
   Connect to an external audio device.

9. Screws
   Remove the screws then install the wall mounting screws into the back of the unit.

Remote Control

Prepare the Remote Control
The provided Remote Control allows the unit to be operated from a distance.

• Even if the Remote Control is operated within the ective range 19.7 feet (6m), remote control operation may be impossible if there are any obstacles between the unit and the remote control.
• If the Remote Control is operated near other products that generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other products may operate incorrectly.

Replace the Remote Control Battery

1. Press and slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA-size batteries (included). Make sure the (+) and (–) ends of the batteries match the (+) and (–) ends indicated in the battery compartment.
3. Close the battery compartment cover.

Precautions Concerning Batteries

• Be sure to insert the batteries with correct positive “ ” and negative “ ” polarities.
• Use batteries of the same type. Never use different types of batteries together.
• Either rechargeable or non-rechargeable batteries can be used. Refer to the precautions on their labels.
• Be aware of your fingernails when removing the battery cover and the battery.
• Do not drop the remote control.
• Do not allow anything to impact the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long time, as corrosion or battery leakage may occur and result in physical injury, and/or property damage, and/or fire.
• Do not use any batteries other than those specified.
• Do not mix new batteries with old ones.
• Never recharge a battery unless it is confirmed to be a rechargeable type.

Placement and Mounting

Placement

• A: If your TV is placed on a table, you can place the unit on the table directly in front of the TV stand, centred with the TV screen.
• B: If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen.

Wall Mounting
Note

Installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal injury and property damage (if you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the installer’s responsibility to verify that the wall will safely support the total load of the unit and wall brackets.

• Additional tools (not included) are required for the installation.
• Do not overtighten screws.
• Keep this instruction manual for future reference.
• Use an electronic studnder to check the wall type before drilling and mounting.

WARNING

• To prevent injury, this apparatus must be securely attached to the door/wall under the installation instructions.
• Suggested wall mounting height:  1.5 meters.

Connections

Use the OPTICAL Socket

• Remove the protective cap of the OPTICAL socket, then connect an OPTICAL cable to the TV’s OPTICAL OUT socket and the OPTICAL socket on the Soundbar.

Use the AUX Socket

• A. Use a 3.5mm to 3.5mm audio cable to connect the TV’s or external audio device headphone socket to the AUX socket on the Soundbar.
• B. Use an RCA to 3.5mm audio cable to connect the TV’s audio output sockets to the AUX socket on the Soundbar.

Connect Power

• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
• Before connecting the AC power cord, ensure you have completed all other connections.
• Soundbar
  Connect the mains cable to the AC~ socket of the Soundbar and then into a mains socket.

Basic Operation

Standby/ON

• When you first connect the main unit to the main socket, the main unit will be in Standby mode.
• Press the button on the remote control to switch the Soundbar ON or STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch the Soundbar OFF completely.

Auto Wake
If a TV or an external device is connected (AUX), the Soundbar will switch on automatically when the TV or the external device is switched on.

Automatic Power Off Function
The Soundbar automatically turns to Standby mode after about 15 minutes if the TV or the external Soundbar is disconnected, or switched off.

• To switch the Soundbar off completely, remove the mains plug from the mains socket.
• Please turn the Soundbar off completely to save energy when not in use.

Select Modes
Press the (SOURCE) button repeatedly on the Soundbar or the AUX, Optical, (Bluetooth) , and USB buttons on the remote control to select the desired mode. The indicator light on the front of the Soundbar will show which mode is currently in use.

Adjust the Volume
Press the +/－ (Volume) on the Soundbar or on the remote control to adjust the volume. If you wish to turn the sound off, press the button on the remote control. Press the button again or press the +/－ (Volume) buttons to resume normal listening. Note: While adjusting the volume, the status LED indicator will flash quickly. When the volume has hit the maximum/minimum value level, the status LED indicator will slowly flash 3 times.

Select a Preset Sound Effect
While playing, press the VOICE / MUSIC / MOVIE buttons on the remote control to select the preset equalizers.
The current setting of the equalizer is displayed by the operating LED.

AUX / OPTICAL Operation

1. Ensure that the Soundbar is connected to the TV or audio device.
2. Press the (SOURCE) button repeatedly on the Soundbar or the AUX, Optical buttons on the remote control to select the AUX or Optical mode.
3. Operate your audio device directly for playback features.
4. Press the +/－ (Volume) button to adjust the volume to your desired level.

Bluetooth® Operation
Through Bluetooth, connect the Soundbar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio flles stored on the device through your Soundbar speakers.

First time pairing

1. Press the (SOURCE) button on the Soundbar or press the button on the remote control to select Bluetooth® mode. The Blue indicator will flash slowly.
2. On the Bluetooth device, switch on Bluetooth, search for and select “Azatom STPL200” to start connection.
3. After audio prompt, the system is successfully connected and the Blue indicator will light up solidly.
4. Select and play audio files or music on your Bluetooth device.

• If you want to connect your Soundbar with another Bluetooth device, press and hold button to disconnect from current Bluetooth connected devices and enter the Bluetooth pairing mode. You will hear audio prompt and Blue indicator will ash rapidly.
• Follow step 2-3 to pair your Bluetooth® device.
• If your Bluetooth device supports A2DP, play music via your device.
• If your Bluetooth device supports AVRCP, use supplied remote control to control play.

Tips

• The operational range between the Soundbar and the device is approximately 8 metres.
• Before connecting a Bluetooth® device to the Soundbar, ensure you know the device’s capabilities.
• Compatibility with all Bluetooth® devices is not guaranteed.
• Any obstacle between the device and the Soundbar can reduce operational range.
• Keep this player away from other electronic devices that may cause interference.
• The player will also be disconnected when your device is moved beyond the operational range.

USB Operation

1. Insert the USB device.
2. Press the (SOURCE) button on the Soundbar or on the remote control to select the USB mode.
3. During playback:

Tips

• This product may not be compatible with certain types of USB storage devices.
• If you use a USB extension cable, USB hub, or USB Multifunctional card reader, the USB storage device may not be recognized.

Troubleshooting

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service.

connected .

•  Ensure that there is power at the AC outlet.

•  Press    (standby) button to turn the Soundbar on.

Remote control does not work| •  Before you press any playback control button, first select the correct source.

•  Reduce the distance between the remote control and the Soundbar.

•  Insert the battery with its polarities /   aligned as indicated.

•  Replace the battery.

•  Aim the remote control directly at the sensor on the front of the Soundbar.

No sound| •  Make sure that the Soundbar is not muted. Press  (MUTE) or volume +/- button to resume normal listening.

•  Press   button on the Soundbar or on the remote control to switch the soundbar to standby mode. Then press the button again to switch the soundbar on.

•  Unplug the soundbar from the mains socket, then plug them again. Switch on the soundbar.

•  Ensure the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM or Dolby Digital mode while using digital (e.g. OPTICAL) connection.

•  The Soundbar may not be able to decode all digital audio formats from the input source. In this case, the Soundbar will mute. This is NOT a defect.device is not muted.

•  If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.

I can’t find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing| •  Ensure the Bluetooth function is activated on your Bluetooth device.

•  Re-pair the Soundbar with your Bluetooth device.

•  The Soundbar has a Bluetooth® function that can receive a signal within 8 metres. Keep a distance within 8 metres between the Soundbar and your Bluetooth® device.

The Soundbar turns off| •  When the Soundbar’s external input signal level is too low, the Soundbar will be automatically turn off after 15 minutes. Please increase the volume level of your external device.

Specifications

Soundbar

< 0.5 W (StandBy)

USB| 5V   500mA

Hi-Speed USB (2.0) , FAT32 / FAT16, 32G (max) , MP3

Dimension (WxHxD)| 614 x 62 x 95 mm
Net weight| 1.92kg
Audio input sensitivity| 500mV
Frequency Response| 65Hz – 20KHz

Bluetooth

Bluetooth version / profiles Bluetooth frequency range Bluetooth Max. transmitting power| V 5.3 (A2DP, AVRCP) 2400 MHz ~ 2483.5 MHz

≤ 5 dBm

---|---
Modulation Type| GFSK, π/4 DQPSK

Amplifier (RMS Output power)

Total| 120 W Maximum/Peak/Reference/Music Power (approx.) 60 W (RMS Power @ 1% THD (W)
---|---
Soundbar| 30W (80) + 30W (80)

Remote Control

Design and specifications are subject to change without notice.

• THIS MANUAL IS AVAILABLE TO DOWNLOAD ONLINE AT WWW.AZATOM.COM.
• AZATOM 2020 ALLRIGHTS RESERVED. AZATOM IS PART OF AZATOM GROUP LIMITED. SEE SITE FOR SAFETYINFORMATION. AZATOM RESERVE THE RIGHT TO WITHDRAW ANY AND ALL PROMOTIONS WITHOUT NOTICE. FOR FULL WARRANTY, EXTENDED WARRANTY AND PROMOTIONAL OFFER
• TERMS & CONDITIONS PLEASE VISIT WWW.AZATOM.COM/TERMS-CONDITIONS.
• AZATOM GROUP LIMITED, TEES VALLEY COURT, WYNYARD BUISNESS PARK, BILLINGHAM, TS22 5FE. UNITED KINGDOM

References

• AZATOM | Best of British Audio Electronics
• Terms & Conditions | Best of British Audio Electronics
• Product Extend | Best of British Audio Electronics

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>