AZATOM PR500 Pulsar PR500 Home Entertainment System Instruction Manual

June 1, 2024
AZATOM

AZATOM-logo

AZATOM PR500 Pulsar PR500 Home Entertainment System

Important Safety Instructions

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-3 CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

  • The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude as to constitute a risk of electric shock to a person.
  • The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Safety

  1. Read these instructions – All the safety and operating instructions should be read before this product is operated.

  2. Keep these instructions – The safety and operating instructions should be retained for future reference.

  3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.

  4. Follow all instructions – All operating and usage instructions should be followed.

  5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool and the like.

  6. Clean only with a dry cloth.

  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

  8. Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifers) that produce heat.

  9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

  10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

  11. Only use attachments/accessories specified by the manufacturer.

  12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

  13. Unplug the apparatus during lightning storms or when unused for long periods of time.

  14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.

  15. This equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth

  16. The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.

  17. The minimum distance around the apparatus for sufficient ventilation is 5cm.

  18. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.

  19. No naked flame sources, such as lighted candles, should be placed on the apparatus.

  20. Batteries should be recycled or disposed of as per state and local guidelines.

  21. The use of apparatus in moderate or tropical climates

Caution

  • Use of controls or adjustments or performance of procedures other than those described herein may result in hazardous radiation exposure or other unsafe operation.
  • To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on the apparatus.
  • The mains plug/appliance coupler is used as the disconnect device, the disconnect device must remain readily operable.
  • The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

Warning

  • The battery (batteries or battery pack) shall not be exposed to excessive heat such as sunshine, re or the like.
  • Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
  • Do not place this unit close to strong magnetic fields.
  • Do not place this unit on the amplifier or receiver.
  • If any solid object or liquid falls into the system, unplug the system and have it checked by qualified personnel before operating it any further.
  • Do not attempt to clean the unit with chemical solvents as this may damage the finish. Use a clean, dry or slightly damp cloth.
  • When removing the power plug from the wall outlet, always pull directly on the plug, and never yank on the cord.
  • Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user’s authority to operate the equipment.
  • The rating label is pasted on the bottom or back of the equipment.

Battery usage CAUTION

To prevent battery leakage which may result in bodily injury, property damage, or damage to the apparatus:

  • Install all batteries correctly, + and – as marked on the apparatus.
  • Do not mix old and new batteries.
  • Do not mix alkaline, standard (Carbon-Zinc) or rechargeable (Ni-Cd, Ni-MH, etc.) batteries.
  • Remove batteries when the unit is not used for a long time.

Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU.To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

We hereby declare that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG,. Inc. and any use of such marks by AAzazattomom is under license. Other trademarks and trade names are those of their respective ownes.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012-2021 Dolby Laboratories. All rights reserved.

Package Contents

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-11

  • Power cord quantity and plug type vary by regions.
  • Images, illustrations and drawings shown on this User Manual are for reference only, actual product may vary in appearance.

Thank You for purchasing the Pulsar PR500 for your home. To make the most of its features, we suggest reading the instruction manual thoroughly, which includes hints and tips to assist in resolving any problems. Please go through all the safety guidelines before using it and keep this manual for future reference.

Identifying the Parts

Soundbar

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-12

  1. (ON/OFF) ButtonSwitch the soundbar between ON and Standby mode.
  2. +/- (volume) Buttons Increase/decrease the volume level.
  3. (SOURCE) Button Select the play function.
  4. LED Indicators / Remote Control Sensor
  5. DC~ Socket Connect to adapter.
  6. USB Socket The USB socket is for service only.
  7. AUX Socket Connect to an external audio device.
  8. OPTICAL Socket Connect to an optical audio output on the TV.
  9. HDMI eARC/ARC Socket Connect to a TV via HDMI cable.
  10. Screws Remove the screws then install the wall mounting screws into the back of the unit.

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-17

Wireless Subwoofer

  1. AC~ s ocket Connect to the power supply.
  2. Pair button Press and hold to enter the pairing mode for the subwoofer, which is used for manual pairing only. (Don’t press the Pair button as the bar and subwoofer will be paired automatically after the unit is switched ON)
  3. Subwoofer indicator Determine the status based on the wireless subwoofer indicator

Remote Control

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-18

Prepare the Remote Control

The provided Remote Control allows the unit to be operated from a distance.

  • Even if the Remote Control is operated within the ective range 19.7 feet (6m), remote control operation may be impossible if there are any obstacles between the unit and the remote control.
  • If the Remote Control is operated near other products which generate infrared rays, or if other remote control devices using infra-red rays are used near the unit, it may operate incorrectly. Conversely, the other products may operate incorrectly.

Replace the Remote Control Battery

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-19

  1. Press and slide the back cover to open the battery compartment of the remote control
  2. Insert two AAA-size batteries (included). Make sure the (+) and (–) ends of the batteries match the (+) and (–) ends indicated in the battery compartment.
  3. Close the battery compartment cover

Precautions Concerning Batteries

  •  Be sure to insert the batteries with correct positive  ” and negative “ ” polarities.
  • Use batteries of the same type. Never use diferent types of batteries together.
  • Either rechargeable or non-rechargeable batteries can be used. Refer to the precautions on their labels.
  • Be aware of your fingernails when removing the battery cover and the battery.
  • Do not drop the remote control.
  • Do not allow anything to impact the remote control.
  • Do not spill water or any liquid on the remote control.
  • Do not place the remote control on a wet object.
  • Do not place the remote control under direct sunlight or near sources of excessive heat.
  • Remove the battery from the remote control when not in use for a long time, as corrosion or battery leakage may occur and result in physical injury, and/or property damage, and/or re.
  • Do not use any batteries other than those specified.
  • Do not mix new batteries with old ones.
  • Never recharge a battery unless it is confirmed to be a rechargeable type

Placement and Mounting

Placement

  • If your TV is placed on a table, you can place the unit on the table directly in front of the TV stand, centred with the TV screen.
  • If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen.

Wall Mounting
Note

  • Installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal injury and property damage (if you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the installer’s responsibility to verify that the wall will safely support the total load of the unit and wall brackets.
  • Additional tools (not included) are required for the installation.
  • Do not overtighten screws.
  • Keep this instruction manual for future reference.
  • Use an electronic stud finder to check the wall type before drilling and mounting.

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-20

WARNING

  • To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
  • Suggested wall mounting height: ≤ 1.5 meters.
  1. Drill 2 parallel holes (Ø 5.5-6 mm each according to wall type) in the wall. The distance between the holes should be 626 mm.
  2. Insert the supplied wall anchors into 2 screw holes on the wall. Insert the supplied wall bracket screws through the wall brackets into the wall anchors. Fix and tighten the screws on the wall.
  3. Remove the screws then install the wall mounting screws into the back of the unit.
  4. Hang the unit on the wall mount brackets.

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-21

Connections

Dolby Atmos
This unit is equipped with a decoder that supports Dolby Atmos audio format. Dolby Atmos® gives you an immersive listening experience by delivering sound in three-dimensional space, and all the richness, clarity, and power of Dolby sound. For more information, please visit dolby.com/technologies/dolby- atmos
Use the HDMI ARC Socket
The ARC (Audio Return Channel) function allows you to send audio from your ARC-compliant TV to your soundbar through a single HDMI connection. To enjoy the ARC function, please ensure your TV is both HDMI-CEC and ARC compliant and set up accordingly. When correctly set up, you can use your TV remote control to adjust the volume output ( VOL + /‒ and Mute ) of the soundbar.

  • Connect the HDMI cable from Soundbar’s HDMI ARC socket to the HDMI ARC socket on your ARC-compliant TV. Then press the remote control to select HDMI ARC.

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-24

Tips

  • Your TV must support the HDMI-CEC and ARC functions. HDMI-CEC and ARC must be set to On.
  • The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about the ARC function, please refer to the owner’s manual.
  • Only HDMI 1.4 or higher version cable can support the ARC function.

Use the OPTICAL Socket

  • Remove the protective cap of the OPTICAL socket, then connect an OPTICAL cable to the TV’s OPTICAL OUT socket and the OPTICAL socket on the Soundbar

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-22

Use the AUX Socket

  • Use a 3.5mm to 3.5mm audio cable to connect the TV’s or external audio device headphone socket to the AUX socket on the Soundbar.AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-fig-23
  • Use a RCA to 3.5mm audio cable to connect the TV’s audio output sockets to the AUXsocket on the Soundbar

Connect Power

  • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
  • Before connecting the AC power cord, ensure you have completed all other connections.
  • Soundbar Connect the Adapter to the DC IN socket of the Soundbar and then into a mains socket.
  • Subwoofer Connect the mains cable to the AC~ socket of the Subwoofer and then into a mains socket

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-25

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-25 Pair up with the Subwoofer
Automatic pairing
The subwoofer and soundbar will automatically pair when both units are plugged into the main sockets and turned on. No cable is needed to connect the two units.

  • Determine the status based on the wireless Subwoofer indicator.

NOTE

  • Do not press the PAIR button on the rear of the subwoofer, except for manual pairing.
  • If the automatic pairing fails, pair the subwoofer with the Soundbar manually.

Manual pairing

  1. Ensure that all the cables are well connected and the Soundbar is in Standby mode.
  2. Press the button on the Soundbar or on the remote control to switch the Soundbar on.
  3. Press and hold the PAIR button on the rear of the subwoofer. The subwoofer will enter the pairing mode and the Pair Indicator will blink quickly.
  4. Press and hold the MUTE button on the remote control to enter the pairing mode.
  5. After the wireless connection succeeds, the Pair Indicator will light up.
  6. If the Pair indicator blinks, the wireless connection has failed. Unplug the cable of the subwoofer and then reconnect the main cable after 4 minutes. Repeat step 1 ~ 4.

NOTE:

  • If the wireless connection fails again, check if there is conflict or strong interference (for example, interference from an electronic device) around your location. Remove these conflicts or strong interferences and repeat the above procedures.
  • The subwoofer should be within 6m (19.7 feet) of the soundbar in an open area.

Basic Operation

Standby/ON
When you first connect the main unit to the main socket, the main unit will be in Standby mode.

  • Press the button on the remote control to switch the Soundbar ON or STANDBY mode.
  • Disconnect the mains plug from the mains socket if you want to switch the Soundbar OFF completely.

Auto Wake
If a TV or an external device is connected (AUX/HDMI ARC), the Soundbar will switch on automatically when the TV or the external device is switched on.
Automatic Power-Off Function
The Soundbar automatically turns to Standby mode after about 15 minutes if the TV or the external Soundbar is disconnected, or switched off.

  • To switch the Soundbar off completely, remove the mains plug from the mains socket.
  • Please turn the Soundbar off completely to save energy when not in use.

Select Modes
Press the (SOURCE) button repeatedly on the Soundbar or the AUX, OPT, (Bluetooth), and

HDMI buttons on the remote control to select the desired mode. The indicator light on the front of the Soundbar will show which mode is currently in use.

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-26

Adjust the Volume
Press the +/- (Volume) on the Soundbar or on the remote control to adjust the volume. If you wish to turn the sound off, press the button on the remote control. Press the button again or press the +/- (Volume) buttons to resume normal listening.

Select a Preset Sound Effect
While playing, press the VOICE / MUSIC / MOVIE buttons on the remote control to select the preset equalizers. The current setting of the equalizer is displayed by the operating LED.

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-27

Adjust the Bass/Treble

  • Press “BASS” then press +/- (VOL) button to increase or decrease the bass.
  • Press “TREBLE” then press +/- (VOL) button to increase or decrease the treble.

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-28

Dolby sound mode
Experience an immersive audio experience with Dolby sound modes.

  • Press the button on the remote control to turn Dolby mode on or off.

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-29

AUX / OPTICAL / HDMI ARC Operation

  1. Ensure that the Soundbar is connected to the TV or audio device.
  2. Press the (SOURCE) button repeatedly on the Soundbar or the AUX, OPTICAL, HDMI ARC buttons on the remote control to select the desired mode.
  3. Operate your audio device directly for playback features.
  4. Press the +/- (Volume) button to adjust the volume to your desired level.
  5. When selecting a diferent audio format, the unit’s indicator light will display the following as follows:

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-30

Tip : The unit may not be able to decode all digital audio formats from the input source. In this case, the unit will mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM or Dolby Digital (Refer to the user manual of the input source device for its audio setting details) with HDMI / OPTICAL input

Bluetooth® Operation

Through Bluetooth, connect the Soundbar to your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your Soundbar speakers.
First time pairing

  1. Press the (SOURCE) button on the Soundbar or press the button on the remote control to select Bluetooth® mode. The Blue indicator will flash slowly.
  2. On the Bluetooth device, switch on Bluetooth, search for and select “Azatom PR500” to start the connection.
  3. After audio prompt, the system is successfully connected and the Blue indicator will light up solidly.
  4. Select and play audio files or music on your Bluetooth device.
  • If you want to connect your Soundbar with another Bluetooth device, press and hold the button to disconnect from current Bluetooth-connected devices and enter the Bluetooth pairing mode. You will hear audio prompt and Blue indicator will flash rapidly. Follow steps 2-3 to pair your Bluetooth® device.
  • If your Bluetooth device supports A2DP, play music via your device.
  • If your Bluetooth device supports AVRCP, use the supplied remote control to control play.
  • Start, pause or resume play
  • Skip to the previous or next track

Tips:

  • T he operational range between the Soundbar and the device is approximately 8 metres.
  • Before connecting a Bluetooth® device to the Soundbar, ensure you know the device’s capabilities.
  • Compatibility with all Bluetooth® devices is not guaranteed.
  • Any obstacle between the device and the Soundbar can reduce operational range.
  • Keep this player away from other electronic devices that may cause interference.
  • The player will also be disconnected when your device is moved beyond the operational range.

Troubleshooting

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service.

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-33

Specifications

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-35

Soundbar

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-34

Wireless Specification

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-37

Subwoofer

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-38

Amplifier (RMS Output power)

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-39

Remote Control

AZATOM-PR500-Pulsar-PR500-Home-Entertainment-System-
fig-40

Design and specifications are subject to change without notice.

contact

To learn more2023 & Register for our Azatom Warranty. Please

Need Help? Contact our customer service team who are always happy to help! Open 9 am – 5 pm Mon – Fri

@AZATOM

warranty

3 years warranty

THIS MANUAL IS AVAILABLE TO DOWNLOAD ONLINE AT WWW.AZATOM.COM
AZATOM 2020 ALL RIGHTS RESERVED. AZATOM IS PART OF AZATOM GROUP LIMITED. SEE SITE FOR SAFETY INFORMATION. AZATOM RESERVE THE RIGHT TO WITHDRAW ANY AND ALL PROMOTIONS WITHOUT NOTICE. FOR FULL WARRANTY, EXTENDED WARRANTY AND PROMOTIONAL OFFER TERMS & CONDITIONS PLEASE VISIT
WWW.AZATOM.COM/TERMS-CONDITIONS.
AZATOM GROUP LIMITED, TEES VALLEY COURT, WYNYARD BUISNESS PARK, BILLINGHAM, TS22 5FE. UNITED KINGDOM

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals