TEINNOVA visiobot lite Duct Inspection System User Manual

TEINNOVA visiobot lite Duct Inspection System

USER MANUAL

Introduction

Dear customer:

Thank you very much for placing your trust in a quality product from TEINNOVA. This product is manufactured using modern production processes and extensive quality assurance measures.
We try to do everything possible to ensure that you are satisfied with this product and can work with it without any problems.
If you have any questions about this product, please contact your dealer or our company directly.
Before operating the machine, carefully read the operating instructions for your equipment.
Please consider this manual as part of the machine and keep it handy for future reference.

Training service

We offer the option of providing companies with specific training in the use of our equipment and training their operators to provide the best service and thus contribute to the success of their end customers.
Aspects such as knowing how to draw up a good quotation objectively, how to respond to specific problems that may arise, or how to offer a more professional and efficient service.

Technical service

Thanks to our own manufacturing of cleaning equipment, we can control at all times the quality and performance of each machine we manufacture, and this has allowed us to have very low repair ratios which have always been solved with our own Tech-nical Support Service managed by the same team that manufactures it, and in very short periods of time.

We have all kinds of spare parts for your equipment, as well as related accessories.

This instruction manual is protected by copyright. We reserve all rights, especially the right to production, translation and processing with electronic systems.

Index

Symbology

All the existing graphic symbols in this manual as well as those indicated on the equipment itself are explained in this section, it is important to read with special attention the text related to this symbology as it is related to personal and equipment safety.

| DANGER!
This symbol alerts you to a potentially hazardous situation which can result in death or serious injury if the instructions are not followed properly. Be sure to read all instructions described in the “Safety Information” section.
---|---
| WARNING!
This symbol alerts you to a potentially hazardous situation which may result in minor or moderate injury, or property damage resulting in personal injury if the indicated instructions are not followed properly.
| CAUTION!
This symbol alerts you to a situation that may result in property damage without personal injury if you do not follow the instructions properly.
| IMPORTANT NOTE!
This symbol alerts you to information regarding the optimal use of the equipment to avoid possible misuse.

Safety Warnings

• The VISIOBOT LITE must NOT be used for purposes other than those described in this instruction manual.
• Before starting up the equipment, make sure that all connections are correct.
• Be careful to place your VISIOBOT LITE on a smooth and stable surface.
• Persons operating the VISIOBOT LITE equipment must be sufficiently trained.
• It is advisable to wear mechanical protection gloves and coveralls when operating the equipment.
• To avoid electric shock, never expose the equipment to rain. Store the equipment indoors in a cool, dry place.
• Check the type of plug before connecting to the mains.
• It is advisable to wear full face protection to prevent splashes from reaching the operator’s eyes.
• Properly secure your VISIOBOT LITE during transport in a vehicle.
• Do not disassemble your VISIOBOT LITE equipment, nor manipulate any of the internal elements of the equipment. In the event of a fault, please contact TEINNOVA’s Technical Assistance Service on +34 941 44 50 56.

Envisaged Conditions of Use

VISIOBOT LITE has been designed to offer the user all possible advantages when carrying out technical inspections inside air conditioning or ventilation ducts.
All this technology is integrated in a compact, heavy-duty case for light transport. It can be used where there is no electricity thanks to its long battery life.
View, record and edit high-resolution colour images.

Any other use is strictly prohibited without the written permission of the manufacturer.

visiobot lite
Electric brushing robot for duct cleaning

CAPTION → power supply

Know Your Machine

Control panel components:

1- On/Off button display
2- Control panel
3- USB input
4- Membrane keyboard
5- Tractor connection

6- Electrical connection
7- Battery level indicator
8- On/Off button
9- Control joystick

Tractor unit components:

1- HD front camera
2- LED illumination ring
3- Drive wheels for belt drive

4- LED illumination rings
5- HD rear camera
6- Control panel connection

Control Panel

Main control panel:

| ON/OFF button| Turns the main functions of the equipment on and off so that you can start working.
---|---|---
| Battery indicator| Indicates the charge level of the battery.
| Camera replacement| Allows you to change the camera to be displayed, choosing between the front and rear camera
| Lighting regulator| Adjusts the intensity of the tractor’s light for better visibility

Accessories and Related Equipment

Accessories included:

Protective pulley for cable

Protective pulley for guiding the equipment cable.
Cód. AC3303412

Operating Instructions

Steps for a correct installation of your VISIOBOT LITE:

1. Positioning your VISIOBOT LITE:

Place your VISIOBOT LITE on a smooth and stable surface.

2. Connection to the electricity grid:

Connect the mains cable to the device, turn it slightly to the right and plug it into the mains.

3. Switching on the equipment:

Press the power button to power the equipment. The display will turn on automatically, unless it is battery operated, which will need to be turned on manually.

4. Connect the tractor unit to the equipment:

Connect the 20 metre cable to the equipment, paying attention to the position of the pins so as not to bend them.

Connect the other end of the cable to the tractor, hooking on the anti-pull rope and observing the position of the pins.

Display system:

1. Main menu:

2. Video/image display and capture:

3. Playback and file management:

4. Video and image playback:

5. Configuration and settings:

6. Help:

Steps for a correct stop of your VISIOBOT LITE:

1. Disconnect the tractor from the equipment:

Disconnect the 20 metre cable to the equipment.

Release the anti-pulling rope of the tractor unit so that the cable can be disconnected.

2. Switching off the equipment:

Turn off your VISIOBOT LITE by pressing the power button.

3. Disconnection from the mains:

Disconnect the power cable from the mains.
Release it from the equipment by pressing the tab and turning it to the left.

Transport

The machine has been designed to be transported in a small van.
During transport the machine must be securely strapped down to prevent any damage.
It is not recommended to place the machine on a transport pallet or similar. The machine must be placed on a completely flat and horizontal surface.

Clean all parts of the machine thoroughly before loading it for transport.

Maintenance and Care

Keep the equipment as clean as possible, storing it in a place protected from the weather.
Keep the machine in good condition, avoid knocks or overloading.
Keep the connections clean to avoid obstructions in the pipes that could cause serious breakdowns in the main elements of the machine.

Spare parts:

TEINNOVA has spare parts for all parts of the machine as well as consumables for all the maintenance tasks indicated in this manual.
Should you require any parts or consumables, please contact TEINNOVA Customer Service on +34 941 44 50 56.

Waste Management

The materials used in the packaging are recyclable. Do not dispose of the packaging in household waste, but hand it in at official collection points for recycling.

Do not throw electrical appliances in the trash! We recommend that electrical tools and accessories are subjected to an environmentally friendly recycling process. Please dispose of the materials in the appropriate container or go to your local collection points.

Directive 2012/19/EU of 4 July 2012 on waste electrical and electronic equipment (WEEE).

Technical Specifications

Full HD 1080p 60Hz
Dimensions:| 470 x 357 x 176 mm
18,5 x 14,1 x 6,9 inches
Weight:| 8.5 kg // 18.74 lb
Tractor connection cable length:| 20 m // 49 ft
Material of structure:| ABS and HDPE

18.5 x 14.1 x 6.9 inches
Weight of tractor unit:| 8 kg // 17.6 lb
Structural material:| Painted steel and HDPE

Guarantee Conditions

1. “TEINNOVA” guarantees its products for a period of 15 days, in relation to those aesthetic defects or defects in the product that are v i s i b l e to the naked eye, and for a period of 1 year, in relation to the remaining manufacturing defects or defects in the product. The “Buyer” must notify the existence of the defects as soon as they are noticed and, in any case, within a maximum period of 5 days after they become apparent. Notification outside this period shall imply the non-application of the guarantee.

“TEINNOVA” will collect and send the products to the factory or to the nearest official Technical Assistance Service for inspection. At that time it will be determined whether the warranty will be applicable or whether it falls within the warranty exclusions. If the warranty is applicable, TEINNOVA will be responsible for the transport, both for collection from the customer’s premises and for returning the product. If it is excluded from the warranty (section 2), the transport, both for collection from the customer’s premises and for the return of the product, shall be at the customer’s expense.

“TEINNOVA” reserves the right to reject the application of the guarantee in the event that there is no evidence of the non-conformity of the product, and the guarantee shall not apply until coverage has been expressly approved. In the event of coverage,

“TEINNOVA” may replace the product or determine the method of repair required.

All repair work carried out under the product warranty must be carried out at the premises of “TEINNOVA” or its designee. The warranty shall cover the materials and labour necessary to repair or replace parts or elements considered to be defective in origin.

The amount or value guaranteed shall be a maximum of the sale price of the product to the “Purchaser”. Any claims made under the guarantee shall not entitle the customer to defer and/or suspend payment of the corresponding invoice and/or any other outstanding invoices.

2. Warranty Exclusions: The following are excluded from the warranty: Actions, alterations and manipulations of the product carried out without the prior express authorisation of the Seller; indirect and/or consequential damage; damage due to negligence, improper use or use not in accordance with the instructions for use of the product or intentional; faults due to adaptations made to the same or to the use of parts not approved or authorised beforehand and expressly by the Seller; costs of ascertaining the defect; collection or replacement costs (the latter two unless the lack of conformity is established and within the limits
established in paragraph (1).

TECAI INNOVA S.L.
C/ Las Balsas 16-B, Pol. Ind. Cantabria.
26009 LOGROÑO (La Rioja), España.

TEINNOVA reserves the right to make changes to equipment without prior notice

“EC” declaration of conformity

MODEL: visiobot litvisiobot litee
SERIAL NUMBER: TC31204160000 – TC31204169999
MANUFACTURER’S DATA:
Manufacturer’s name: TECAI INNOVA S.L.
Telephone: +34 941 44 50 56
Fax: +34 941 25 24 71
Web: www.teinnova.net

SIGNATURE: ARMANDO SÁENZ ANGULO Technical Director
Done at Logroño, 09 February 2024

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>