PIKO 57564 Class 55 G7.1 Tender Locomotive Instruction Manual
- June 1, 2024
- PIKO
Table of Contents
PIKO 57564 Class 55 G7.1 Tender Locomotive
Caution!
Disconnect carefully the wires out of the cable trench in the zinc alloy chassis.
Caution!
Before taking off the bottom plate, disconnect carefully the wires out of the
cable trench in the zinc alloy chassis.
Change the Traction Tyres
If used frequently, oil the wheelsets with a drop of non-resinous, acidfree
sewing machine oil! In order to achieve the best possible running and traction
properties, it is advisable to run the locomotive in for 25 minutes forwards
and 25 minutes in reverse without load. Clean rails are essential for good
performance.
Instructions for use
long crank bolt
Caution!
Before taking off the bottom plate, the wires of the wheel contact have to be unsoldered first from PCB.
Installing Decoder
Extension
Spare parts
Please order the wanted spare part with the complete spare part item number
For models with PIKO SmartDecoder: Please note the enclosed information about the decoder firmware update.
Complaint note:
Thank you for your trust in PIKO models. We hope that you are satisfied with the model and enjoy it for a long time. Should you nevertheless have problems with your PIKO product and wish to complain it, we ask you to fill in the complaint form, which you can find at www.piko- shop.de/en/widerruf, and enclose it with the complained item. Thank you very much
Please note:
Safety instructions in other languages, please see: www.piko- shop.de
