PIKO Mogul 2-6-0 Steam Locomotive Owner’s Manual
- June 2, 2024
- PIKO
Table of Contents
# 47801 Gleichstrom
Instructions for use: Steam Locomotive
Wichtige Informationen sind in der Verpackung und in der Anleitung
enthalten.
Bitte bewahren Sie diese auf.
Mogul 2-6-0 Steam Locomotive
Spare parts
Please order the wanted spare part with the complete spare part item number.
| Description | spare part N° | **PG*** |
|---|---|---|
| Body, complete | 47800-03 | 14 |
| Roof, complete | 47800-06 | 11 |
| Roof cables | 47452-12 | 7 |
| Insulators, Antenna | 47452-15 | 9 |
| Spring for drawbar (set of 2) | 59900-16 | 5 |
| Horns | 47451-17 | 7 |
| Handrails | 47800-18 | 9 |
| Windows (set of 3) | 47455-19 | 7 |
| Light inserts (set of 3) | 47450-21 | 7 |
| Light bar interior | 47450-22 | 6 |
| Buffer base | 47450-24 | 8 |
| Handle, Air pipe | 47450-25 | 7 |
| Buffer (set of 4) | 47450-26 | 6 |
| Driver cab | 47450-27 | 7 |
| Drawbar, Cover, Spring | 47450-28 | 8 |
| Cow catcher | 47450-29 | 7 |
| Sandbox (set of 8) | 47450-30 | 7 |
| Attaching parts 1 | 47454-31 | 8 |
| Attaching parts 2 | 47450-33 | 8 |
| Transformer box | 47450-34 | 7 |
| Tube for Transformer box | 47450-35 | 7 |
| Loudspeaker cover | 47450-40 | 6 |
| Motor cover | 47450-41 | 7 |
| Motor, complete | 47457-42 | 13 |
| Ball shaft + bushes | 47450-43 | 7 |
| Clip | 47450-44 | 6 |
| Gearbox, complete | 47454-45 | 13 |
| Bogie w small parts | 47450-46 | 9 |
| Small parts bogie | 47450-47 | 7 |
| Wheelset w friction tyres | 47454-48 | 9 |
| Wheelset w/o friction tyres | 47454-49 | 9 |
| Screws (set of 13) | 47450-50 | 7 |
| Main board with Lightboards and wires | 47450-52 | 14 |
| Light mask | 47450-53 | 7 |
| Spare parts standard range | ||
| Friction tyres (set of 10) | 46020 | |
| TT short Coupling | 46042 | |
| Pantograph DB AG | 46154 | |
| PIKO SmartDecoder XP 5.1 Sound | 46547 | |
| Replacement loudspeaker | 56333 |
PIKO Art.-Nr.:
56301 Loco-Oil
56300 Precision engine oiler w fine dosage
If used frequently, oil the wheelsets with a drop of non-resinous, acid-free sewing machine oil! In order to achieve the best possible running and traction properties, it is advisable to run the locomotive in for 25 minutes forwards and 25 minutes in reverse without load. Clean rails are essential for good performance.
Change the traction tires
The PIKO SmartDecoder XP 5.1 Sound PluX22 is a powerful multiprotocol sound decoder of the newest generation. The decoder ensures a high-level noiseless sound experience. It can be used with DCC, Motorola®- and mfx® digital systems and it is also operable in analogue mode on DC and AC layouts. The decoder is RailCom® and RailComPlus® capable. The innovative PIKO SmartDecoder XP 5.1 Sound independently recognizes the respective operating mode and has a wide range of setting options for the additional functions. The decoder works with an auto-adaptive motor control for a silky smooth operation and is suitable for a continuous current consumption of up to 1A. The amplified function outputs can handle up to 0.4A each. Its many braking section functions include ABC braking, ABC automatic shuttle, as well as ABC slow speed. The sound part can control fixed function outputs as well as the motor output of the decoder. For example, the lighting of a diesel locomotive flickers when the engine is started.
Function assignments:
| FO | Light | F10 | Cab Door | F20 | Dead Man’s Pedal |
|---|---|---|---|---|---|
| F1 | Engine | F11 | Cab Window | F21 | Sanding |
| F2 | High Tone Horn | F12 | Pantograph | F22 | Curve Squeal |
| F3 | Low Tone Horn | F13 | Dead Man’s Brake | F23 | Clickety-Clack |
| F4 | Cab Light 1 | F14 | Air Valve Release | F24 | Train lighting: Engine pushing |
| F5 | Cab Light 2 | F15 | Coupling | F25 | Train lighting: Engine pulling |
| F6 | Conductefs Whistle | F16 | Engine Room Door | F26 | Volume Regulator |
| F7 | Switching Gear | F17 | Fan | F27 | Tunnel mode |
| F8 | Automatic Spring Brake | F18 | Station Announcement 1 | F28 | – |
| F9 | Air Compressor | F19 | Station Announcement 2 |
Configurations-CVs
| CV | Description | Area | **Value*** |
|---|---|---|---|
| 1 | Locomotive address | DCC: 1 – 127 | |
| Mot: 1 – 80 | 3 | ||
| 2 | Minimum speed (the speed from 0 until the locomotive is running at speed | ||
| step 1) | 0 – 255 | 0 | |
| 3 | Acceleration delay | 0 – 255 | 30 |
| 4 | Braking delay | 0 – 255 | 30 |
| 5 | Maximum speed (must be greater than CV 2) | 0 – 255 | 200 |
| 6 | Average speed (must be greater than CV 2 and less than CV 5) | 0 – 255 | 100 |
| 7 | Software version (The processor can be updated) | – | different |
| 8 | Manufacturer’s ID Decoderreset CV8 = 8 | – | 162 |
| 12 | Decoder operating mode |
Bit 0=1 DC (analog operation; direct current) on
Bit 2=1 DCC data format on
Bit 4=1 AC (analog 3-rail operation; alternating current) on
Bit 5=1 Motorola®, data format on
Bit 6=1 mfx® data on| Value
1
4
16
32
64| 0 – 117| 117
17
18| Long locomotive address
17 =-high Byte
18 = low Byte| 128- 10239
192 – 231
0 – 255| 1000
195
232
27| Brake signal settings (automatic stop)
Bit 0 =1 -> ABC (Automatic Brake Control) right rail positive
Bit 1 = 1 -> ABC left rail positive
Bit 4 = 1 -> DC; opposite direction of travel
Bit 5 = 1 -> DC; same direction of travel| Value
1
2
16
32| 0 – 51| 0
29| DCC standard configuration
Bit 0=0 Normal direction of travel
Bit 0=1 Opposite direction of travel
Bit 1=0 14 speed steps
Bit 1=1 28 speed steps
Bit 2=0 Digital mode only
Bit 2=1 Automatic analog/digital recognition
Bit 3=0 RailCom® turned off
Bit 3=1 RailCom® turned on
Bit 4=0 Speed steps over CV 2, 5, and 6
Bit 4=1 Use the characteristic curve from CV 67 – 94
Bit 5=0 Short address (CV1)_
Bit 5=1 Long address (CV 17/18)| Value
0
1
0
2
0
4
0
8
0
16
*0
32| 0 – 63| 14
30| Error codes for the motor, thermal overload, and function outputs:
1 = motor error, 2 = thermal overload error, 4 = function output error| 0 – 7|
0
Please note:
Safety instructions in other languages,
please see: www.piko-shop.de
PIKO Spielwaren GmbH • Lutherstraße 30 • 96515 Sonneberg • GERMANY
Tel. +49 (3675) 8972 – 55 (dienstags und donnerstags von 16 – 18 Uhr)