MEAN WELL APV-35 Series 35W Single Output Switching Power Supply Owner’s Manual

: June 1, 2024
: MEAN WELL

Table of Contents

MEAN WELL APV-35 Series 35W Single Output Switching Power Supply
Product Information
Product Usage Instructions
GTIN CODE
Features
SPECIFICATION
Mechanical Specification
Block Diagram
Derating Curve
Static Characteristics
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MEAN WELL APV-35 Series 35W Single Output Switching Power Supply

MEAN-WELL-APV-35-Series-35W-Single-Output-Switching-Power-Supply-
Product

Product Information

Specifications:

Model: APV-35-5, APV-35-12, APV-35-15, APV-35-24, APV-35-36
Output Voltage: 5V, 12V, 15V, 24V, 36V
Rated Current: 5A, 3A, 2.4A
Rated Power: 25W, 36W
Ripple & Noise: 120mVp-p, 150mVp-p
Efficiency: 76.5%, 83%, 84%
Operating Temperature: -30°C to 70°C
Working Humidity: 20% to 90% RH non-condensing
Safety Standards: UL8750, CSA-C22.2 No. 250.0-13, BIS IS15885, EAC TP TC 004, IP42, BS EN/EN 62368-1 Approved
EMC Compliance: BS EN/EN55032, BS EN/EN61000-3-2 Class A, BS EN/EN61000-3-3
Isolation Resistance: I/P-O/P:3KVAC I/P-O/P:>100M Ohms/500VDC

Product Usage Instructions

Installation:

Ensure the input power source matches the voltage range specified (90 ~ 264VAC).
Connect the output terminals to your device following the correct polarity (V+ and V-).

Operation:

Power on the switching power supply using the AC/N and AC/L terminals.
Monitor the load current to ensure it stays within the specified range for each model.

Safety Precautions:

Do not exceed the maximum current and voltage ratings to prevent damage.
Keep the power supply away from moisture and high temperatures to ensure proper operation.

FAQ:

Q: What should I do if the power supply overheats?
A: Ensure proper ventilation around the power supply and reduce the load if necessary to prevent overheating.
Q: Can I use this power supply for LED lighting applications?
A: This product is not intended for LED lighting luminaire applications in the EU. Refer to the LPF/NPF/XLG series for such purposes.

User’s Manual

GTIN CODE

MW Search: https://www.meanwell.com/serviceGTIN.aspx.

Features

Constant voltage mode power supply
Universal AC input / Full range
Withstand 300VAC Surge input for 5 seconds
Protections: Short circuit / Over load / Over voltage
Fully isolated plastic case
Cooling by free air convection
Small and compact size
IP42 design
Class 2 power unit
Pass LPS
100% full load burn-in test
Low cost, high reliability
Suitable for LED-related fixtures or appliances (such as LED Decoration or Advertisement devices) (Note.10)
2 years warranty.

MEAN-WELL-APV-35-Series-35W-Single-Output-Switching-Power-Supply-
Fig-2

SPECIFICATION

MODEL| APV-35-5| APV-35-12| APV-35-15| APV-35-24| APV-35-36
---|---|---|---|---|---

OUTPUT

| DC VOLTAGE| 5V| 12V| 15V| 24V| 36V
RATED CURRENT| 5A| 3A| 2.4A| 1.5A| 1A
CURRENT RANGE| 0 ~ 5A| 0 ~ 3A| 0 ~ 2.4A| 0 ~ 1.5A| 0 ~ 1A
RATED POWER| 25W| 36W| 36W| 36W| 36W
RIPPLE & NOISE (max.) **Note.2| 120mVp-p| 150mVp-p| 150mVp-p| 180mVp-p| 180mVp-p
VOLTAGE TOLERANCE Note.3| ±5.0%
LINE REGULATION| ±1.0%
LOAD REGULATION| ±2.0%
SETUP, RISE TIME| Note.6| 1500ms, 40ms / 230VAC 1500ms,40ms / 115VAC at full load
HOLD UP TIME (Typ.)**| 20ms/230VAC 12ms/115VAC at full load

INPUT

PROTECTION

| OVERLOAD| 110%~160% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVERVOLTAGE| 5.75 ~ 6.95V| 13.8 ~ 16.2V| 17.25 ~ 21V| 27 ~ 32.4V| 41.4 ~ 48.6V
Protection type: Shut down o/p voltage, re-power on to recover

ENVIRONMENT

| WORKING TEMP.| -30 ~ 70℃(Refer to “Derating Curve”)
WORKING HUMIDITY| 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 50℃)
VIBRATION| 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, and Z axes

SAFETY & EMC

| SAFETY STANDARDS| UL8750 , CSA-C22.2 No. 250.0-13, BIS IS15885, EAC TP TC 004,IP42 , BS EN/EN 62368-1 Approved
WITHSTAND VOLTAGE| I/P-O/P:3KVAC
ISOLATION RESISTANCE| I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Compliance to BS EN/EN55032,BS EN/EN61000-3-2 Class A,BS EN/EN61000-3-3, EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN55035,BS EN/EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), EAC TP TC 020

OTHERS

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. Derating may be needed under low input voltage. Please check the static characteristics for more details.

5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify the EMC Directive on the complete installation. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)

6. Length of set up time is measured at the first cold start. Turning ON/OFF the power supply may lead to an increase in the set-up time.

7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitudes higher than 2000m(6500ft).

8. Products sourced from the Americas regions may not have the ENEC/BIS/CCC logo. Please contact your MEAN WELL sales for more information.

9. For any application note and IP waterproof function installation caution, please refer to our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf

10. This product is not intended for LED lighting luminaire applications in the EU. (In the EU the LPF/NPF/XLG series are recommended.)

※ Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx.