ProCase 10.9 Inch Wireless Keyboard User Manual

Wireless Keyboard User Manual
Contains: user’s guide1 keyboard case1 USB cable*1

Product specifications

1. Bluetooth 3.0 interface standard
2. Operating Distance to 10 mercers
3. Modulation system : GFSK
4. Operation Voltage : 3.0~4.2V
5. Operation Current : < 2.5mA
6. Standby Current : < 0.3mA
7. Sleeping Current : < 40uA
8. Charging Current : > 200mA
9. Standby Time : > 100 days
10. Charging Time : 3~4 hour
11. Battery Capacity : 150mA/420mA
12. Uninterrupted Working time : 100 hours
13. Lithium Battery Life : 3 years
14. Key Strength : 80±10g
15. Key life : 5million strokes
16. Operating Temperature : -10±55C

Getting Started Guide

1. Button

Power toggle switch : slide switch ON or OFF to control the device power turn on or turn off.
Connect Button : Under the Power button turn on case, resdy to be connent to iPad.

2. Indicator

| Power indicator : urn on the power toggle switch. The state indicator light will be on for 4 seconds, then the light will go off.
---|---
| Charging indicator : indicator light will be on when the keyboard will be charring by USB.
| Bluetooth connect indicator : Press on the [connect] button, the[Bluetooth] indicator light will be blinking, indicator light will stay on until the keyboard connect with your device.
| Uppercase and lowercase indicator : Indicator light will stay on under the uppercase

Charging

When the battery is low, the power indicator light flaming, that means need to charge the bluetooth keyboard.

1. Connect the B end of the original USB cable to the keyboard.
2. Connect the A end of the USB cable to power adapter or A PC USB interface.
3. When charging charging “Charge” indicator will light up, when the battery is full of “Charge” will automatically lights go out.

Bluetooth keyboard connection operation steps

1. To set the keyboard power button to “ON” position, the power indicator light will light up for 4 seconds, and then Go out; Press the “Connect” to Connect a keyboard key, Bluetooth connetion will twinkle lights when key Bluetooth is started, can be connected to the tablet The computer.
2. Open and unlock the tablet computer, click on the flat Board computer “Settings” icon.
3. Select “Bluetooth” in “Settings” interface Meter the bluetooth Settings interface, click on the bluetooth Psara to open the connection.
4. The tablet computer will automatically search is enabled Bluetooth devices wireless keyboard found signals, Click the project link.

Notice

1. It is recommended to turn off keyboard when it will be idled for long, to prolong the battery life.
2. To prolong battery’s service life, it is recommended to charge the key board only when the power indicator is flashing. Each charring time is advisable to be onto less than 2hs.

Energy-saving sleep mode

When the keyboard goes into sleep mode for 10 minutes without instructions press any key and wait for 5 seconds. The keyboard will start up.

Troubleshooting

1. Make sure the power is turned on.
2. Make sure the keyboard is within operable range coverage.
3. Make sure the battery has electricity.
4. Make sure the setting of Bluetooth on tablet PC is turned on.
5. Make sure the wireless keyboard is connected with Bluetooth.
6. Make sure the wireless keyboard and Bluetooth have been Paired.

Charging
When the battery percentage is low, the power indicator flashes, indicating the Bluetooth keyboard needs to be charged.

1. Connect end B of original USB cable to the keyboard.
2. Connect end A of USB cable to power adapter to USB interface of computer,
3. In charging the “Charge” charge indicator becomes ON, and when the battery is fully charged, the “Charge” indicator becomes OFF automatically.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>