DRIPEX D201 Mesh Office Chair Instruction Manual

June 14, 2024
Dripex

DRIPEX D201 Mesh Office Chair

Product Information

Product Usage Instructions

  1. Step 1: Insert the base legs into the base joint and screw them together.
  2. Step 2: Keep the gap on the castor loop down.
  3. Step 3: Insert the castor into the base leg hole, ensuring it is precisely aligned.
  4. Step 4: Push the castor into the base leg hole using both thumbs.
  5. Step 5: Insert the base caps and cylinder into the base.
  6. Step 6: Attach the arms to the seat.
  7. Step 7: Tilt the control to adjust the seat.
  8. Step 8: Adjust the backrest to the desired position.
  9. Step 9: Assemble the headrest according to the provided instructions.
  10. Step 10: Follow the provided instructions to adjust the tilt/height control of the seat.

To Lower the Seat:

  1. Keep seated on the chair.
  2. Pull out the lever to unlock.
  3. Lift up the lever handle.
  4. Push in the lever to lock.

To Raise the Seat:

  1. Pull out the lever to unlock.
  2. Lift the lever handle while lifting your buttocks off the seat.
  3. Push in the lever to lock and sit down.

To Recline:

  1. Lay your back on the chair back.
  2. Pull out the lever to unlock.
  3. Push in the lever to lock.
  4. If the chair back sticks, press it with your back and repeat the above steps.

Care and Cleaning:

  1. Do NOT expose the chair to fire, wet, acidic, or corrosive environments. Avoid overexposure to the sun.
  2. Do NOT use sharp or hooked objects to scrape the chair.
  3. Do NOT use abrasive chemicals for cleaning.
  4. If the frame is stained, wipe it clean with warm water or pledge surface cleaner (available on Amazon).
  5. If the chair squeaks, tighten screws underneath the seat.

Notes and Warnings :

  • Only one person should sit on the chair. Do NOT stand on it.
  • Do NOT sit on the armrest as it may be dangerous.
  • Do NOT put overweight on the chair or use it as a trolley.
  • Do NOT let children under 5 years old sit on the chair alone to avoid danger of suffocation.
  • Keep the plastic bag away from babies and children to prevent suffocation.
  • If any parts are missing, broken, damaged, or incorrect, stop using the product and contact the manufacturer for repairs using authorized parts.
  • For missing parts or quality issues, message the manufacturer via Amazon or email with your order ID and photo/video proof. A response will be provided within 24 hours.

Email Support: [email protected]

  • Step 1

    • Insert base legs into base joint, screw together
    • screws M612MM10pcs
  • Step 2

    • Keep the gap on the castor loop down
  • Step 3

    • Insert a little, make sure the castor precisely aligned with base leg holeDRIPEX-D201-Mesh-Office-Chair-image-5
  • Step 4

    • Push castor into base leg hole with both of your thumbs DRIPEX-D201-Mesh-Office-Chair-image-6
  • Step 5

    • Insert base caps and cylinder into base
  • Step 6

    • Arms to seat
  • Step 7

    • Tilt control to seat
  • Step 8

    • Backrest to seat
  • Step 9

    • Assemble headrestDRIPEX-D201-Mesh-Office-Chair-image-11
  • Step 10

TILT/HEIGHT CONTROL

To Lower the Seat

  1. Keep seated on the chair
  2. Pull out the lever to unlock
  3. Lift up the lever handle
  4. Push in lever to lockDRIPEX-D201-Mesh-Office-Chair-image-13

To Raise the Seat

  1. Pull out the lever to unlock
  2. Buttocks off the seat, then lift up the lever handle
  3. Push in lever to lock, sit downDRIPEX-D201-Mesh-Office-Chair-image-14

To Recline

  1. Lay your back on the chair back.
  2. Pull out the lever to unlock
  3. Press chair back with your back to tilt to 107° or 130°
  4. Push in lever to lock

If sticks, press chair back with your back a little, then repeat the above stepsDRIPEX-D201-Mesh-Office-Chair-image-15

Recline backward
DRIPEX-D201-Mesh-Office-Chair-image-16

  1. Your back off the chair back. Then, pull out the lever to unlock
  2. Press chair back to 130° with your back.
  3. Your back off the chair back again (chair back will automatically back to 95°)
  4. Push in lever to lock
  • If sticks, press chair back with your back a little, then repeat the above steps

CARE AND CLEANING

  1. Do NOT get it close to the fire or a wet acidic and corrosive environment. Avoid overexposure to the sun.
  2. Do NOT use sharp or hooked objects to scrape the chair
  3. Do NOT use abrasive chemicals for cleaning.
  4. If the frame stained, wipe clean with warm water or pledge surface cleaner (available on Amazon).
  5. If squeaks, tighten screws underneath the seat.

NOTES AND WARNINGS

  1. For one person to sit on. Do NOT stand on.
  2. Do NOT sit on the armrest in case of danger.
  3. Do NOT put overweight on the chair, or used as trolley.
  4. Do NOT let the child sit on the chair alone if he is under 5 year-old.
  5. To avoid danger of suffocation, keep the plastic bag away from babies & children.
  6. If parts missing, broken, damages or wrong. Stop using this product until repairs are made using factory authorized parts.

For parts missing or any quality issues, please message us via Amazon or email with your order id + photo/video proof. We’ll respond within 24hours

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Dripex User Manuals

Related Manuals