DRiPEX D202PRO Ergonomic Office Chair Installation Guide
- June 14, 2024
- Dripex
Table of Contents
DRiPEX D202PRO Ergonomic Office Chair
Product Information
- Product Name: Q202A-D202PRO
- Manufacturer: Dripex
- Contact Email: support@dripex.co.uk
Care and Cleaning Instructions
- Do NOT expose the chair to fire or wet, acidic, and corrosive environments. Avoid overexposure to the sun.
- Do NOT use sharp or hooked objects to scrape the chair.
- Do NOT use abrasive chemicals for cleaning.
- If the frame is stained, wipe it clean with warm water or pledge surface cleaner (available on Amazon).
- If the chair squeaks, tighten screws underneath the seat.
Notes and Warnings
- The chair is designed for one person to sit on. Do NOT stand on it.
- Do NOT sit on the armrest to avoid danger.
- Do NOT put overweight on the chair or use it as a trolley.
- Do NOT let children under 5 years old sit on the chair alone to avoid suffocation.
- Keep plastic bags away from babies and children to prevent suffocation.
- If any parts are missing, broken, damaged, or incorrect, stop using the product and contact the manufacturer for repairs using factory authorized parts.
If there are any missing parts or quality issues, please message us via Amazon or email with your order ID and provide photo/video proof. We will respond within 24 hours.
Product Usage Instructions
Installation Steps
- Insert the base legs into the base joint and screw them together.
- Keep the gap on the beaver loop down.
- Insert the castor into the base leg hole, ensuring precise alignment.
- Push the beaver into the base leg hole using both thumbs.
- Insert the base caps and cylinder into the base.
- Attach the arms to the seat.
- Tilt the control to the seat.
- Attach the backrest to the seat, applying force with both thumbs on the arched area (avoid the lower arched area).
- Insert the headrest into the connector on the top of the backrest and adjust its height. Then, screw the connector.
Seat Height Adjustment
- To lower the seat:
- Keep seated on the chair.
- Pull out the lever to unlock.
- Lift up the lever handle.
- Push in the lever to lock.
- To raise the seat:
- Pull out the lever to unlock.
- Lift up the lever handle while lifting your buttocks off the seat.
- Push in the lever to lock and sit down.
Parts And Tools
Installation Instructions
- Step 1: Insert base legs into base joint, screw together
- Step 2: Keep the gap on the castor loop down
- Step 3: Insert a little, make sure the castor precisely aligned with base leg hole
- Step 4: Push castor into base leg hole with both of your thumbs
- If jammed, pull out the castor, switch to other castors then push it into holes again.
- Follow the installation video on Amazon
- Step 5: Insert base caps and cylinder into base
- Step 6: Arms to seat
- Step 7: Tilt control to seat
- Step 8: Backrest to seat
- Step 9: Insert headrest into the connector (on the top of backrest), then raise headrest to its highest point; Screw the connector. Adjust headrest height
- Step 10
TILT/HEIGHT CONTROL
To Lower the Seat
- Keep seated on the chair
- Pull out the lever to unlock
- Lift up the lever handle
- Push in lever to lock
To Raise the Seat
- Pull out the lever to unlock
- Buttocks off the seat, then lift up the lever handle
- Push in lever to lock, sit down
To Recline
- Lay your back on the chair back. Pull out the lever to unlock
- Press chair back with your back to tilt to 107° or 130°
- Push in lever to lock
If sticks, press chair back with your back a little, then repeat the above steps
Recline backward
- Your back off the chair back.
- Then, pull out the lever to unlock
- Press chair back to 130° with your back.
- Your back off the chair back again (chair back will automatically back to 95°)
- Push in lever to lock
MORE INFORMATION
CARE AND CLEANING| 1. Do NOT get it close to the fire or a wet,acidic and corrosive environment. Avoid overexposure to the sun.
2. Do NOT use sharp or hooked objects to scrape the chair
3. Do NOT use abrasive chemicals for cleaning.
4. If the frame stained, wipe clean with warm water or pledge surface cleaner (available on Amazon).
5. If squeaks, tighten screws underneath the seat.
---|---
NOTES AND WARNINGS| 1. For one person to sit on. Do NOT stand
on.
2. Do NOT sit on the armrest in case of danger.
3. Do NOT put overweight on the chair, or used as trolley.
4. Do NOT let the child sit on the chair alone if he is under 5 year-old.
5. To avoid danger of suffocation, keep the plastic bag away from babies & children.
6. If parts missing, broken, damages or wrong. Stop using this product until repairs are made using factory authorized parts.
| For parts missing or any quality issues, please message us via Amazon or email with your order id + photo/video proof. We’ll respond within 24hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>