DripeX B08FCH6V8G Basketball Hoop Instruction Manual
- May 15, 2024
- Dripex
Table of Contents
DripeX B08FCH6V8G Basketball Hoop
IMPORTANT INFORMATION
warning:
For your safety, please don’t violently dunk or hang on the hoop.
Please feel free to contact us with your Order ID if you have problems with
assembly or need replacement parts.
Email: [email protected]
Installation reminder
In order to be safe and save your time, please check all the accessories in
the package before installation, read the instructions carefully, and then
install it after mastering the installation steps.
2 adults are recommended for installation, 2 adjustable wrenches are required!
SAFETY INSTRUCTIONS (IMPORTANT!!!)
- Due to the uncertainty of the weather (sudden gusts of wind, etc.), FOR EXTRA SAFE you can put II couple of bags of SAND LAYING ON THE BASE(we recommend you to do this whether your base have been filled with water or sand), It will hold the basket more steady, safe and in place.
- DO NOT PLACE HARO THINGS ON THE BASE (such as sharp stones, irregular bricks, etc), and DO NOT STEP on the base, Otherwise it will DAMAGE THE BASE.
- YOU NEED TO MOVE THE BASKETBALL HOOP TO A SAFE PLACE DURING STRONG WINDS.
- Please check the overall weight of the base (If the base Is not heavy enough, the basketball hoop may fall over) and the fastening of the screws before use to avoid any damage to the product and users.
- Two or more adults are recommended for installation, and children are prohibited from installing and climbing the basketball hoop.
- Please check whether the base Is leaking before use, small flow of water leakage can cause the product to fall over.
- The product is suitable for leisure and entertainment, not for fierce competition. Strong dunks and hangs are prohibited.
a. After the installation Is completed, the base must be filled with water or sand Immediately to prevent It from falling over. The base must be placed on a level and flat ground before use to prevent it from falling over or being damaged by sharp objects.
Warning
- It is forbidden to dimb or hang on the hoop, backboard bracket and bead net.
- It is forbidden to use products with potential safety hazards. If there are parts that need to be repaired or replaced, please contact after-sales personnel or local dealers in time
- Special care must be taken when moving on uneven ground, which may cause side material of the product. caveat!
- In order to avoid damage to the base due to freezing, when the temperature is lower than O degrees Celsius, the water in the base must be poured out or filled with sand.
- If the product is used outdoors for a long lime, please ensure that the top of the main pole and the lifting pole are covered with plastic covers to prevent rainwater from affecting the product life.
- Please do not wear watches, necklaces, earrings and other jewelry when in use, to prevent hanging up the basket or losing it during exercise.
- When adjusting the height, please leave your fingers away from the moving parts.
- It is forbidden for children to move the product or adjust the height of the product.
Height adjustment
There are several holes of different heights on the top pole. Put the basket
at the height you want and install the F screws.
Minimum Height: 4.4FT(without middle pole).
Parts List
| Accessory model | Name | Quantity | Note |
|---|---|---|---|
| B1, B2, 83 | Screw , M8 X 35MM | 2 | Connect backboard, hoop and backboard |
bracket
94, 85, B6, B7| Screw with spring, M8 X 10MM| 2| Connect bracket[
backboard. hoop and backboard
C 1, C2| Screw , M8 X 16MM| 2| Fix the backboard bracket to the backboard
DI . D2, D3| Screw , M8 X 20MM| 2| Connect the base and bast support rod
El, E2, E3| Screw , M8 x 90| 1| Connect the bottom pole Y and the base
support rod
Fl, F2, F3| Screw , M8 X 85MM| 6| Connect the bracket K and top pole W
Connect the top pole W and middle pole; and bottom pole Y
G| Wheel| 2|
H| Top pole cover| 1| Usually H(coyer) is already in the top pole Y.
I| Base water injection hole cover| 1| Usually I ( base cover) is already in
the Base
J| Basketball rim| 1|
K| Backboard bracket| 1|
L| Net| 1|
M| Backboard| 1|
U1| Base support rod (right side)| 1|
U2| Base support rod (left side)| 1|
o| Wheel pin| 1|
Top polo| 1|
x| Middle pole| 1|
y| Bottom pole| 1|
S| Base| 1|
Note: When you install the bracket, please refer to the direction of the
arrow to tum the K Part “II” type into a ”Y” type model with your hands.
If you still have trouble with It please refer to this video on
YouTube: https://youtu.be/mEircmKGlco
As shown on the right, when there is a burr or deformation at the connection part of the pole, you can put a cardboard or wooden board on the ground, and knock the necked part of the pole into the other pole.
As shown on the left, insert the necked part of the bottom pole Y into the bottom v part of the middle pole X,
-
Fix the middle pole X and the bottom pole Y into two screws F, and tighten Them.
-
As shown on the left, use wheel pin 0 to pass through wheel G, base Sand bottom pole Y In turn.
-
As shown above, use Screws E to connect 1″8 support rod U1, U2 and the bottom pole Y. use sere= D to connect the support rod and the bases. please pay attention to the direction of the support rod.
As shown in Ute figure, use screws 81 ,82,83 to connect the basketball rim J,
backboard M and bracket K. Please note the two spring-loaded & screws
84,85,86,87 must be connected to the two upper holes of the basketball rim.
As shown In the figure, Use acreW3 C1 ,C2 to connect the top or bracket K end
backboard M, and tighten the screws
As shown In tile figure, use screws F1,F2,F3 to fix top pole w In the middle
of bracket K,
lnsert the installed top pole w into the middle pole X and fix it with two
screws F.
It is recommended to use objects to support the basketball hoop for assembly
Nets installation diagram
If the product does not need to be moved frequently, we recommend putting sand in the base instead of water. Because water freezes below 0’C, It is easy to damage the base, But please note that the sand cannot be poured out after It Is placed In tile base.