DRIPEX D202 Ergonomic Office Chair Mesh High Back Desk Chair Instruction Manual

DRIPEX D202 Ergonomic Office Chair Mesh High Back Desk Chair

Product Specifications

• Base joint
• Base legs: 5 pcs
• SGS cylinder
• Base Seal Cap
• Beavers: 5 pcs
• Tilt/height control
• Seat
• Arms
• Backrest
• Headrest
• Base Screws: M6*12MM – 10 pcs
• Screws M6*40MM – 6 pcs
• Washers M6*15MM – 6 pcs
• Screws M6*55MM – 4 pcs
• Washers M8*17MM – 7 pcs
• Screws M8*20MM – 3 pcs
• Washers M8*13MM – 3 pcs
• Screws M6*20MM – 2 pcs
• Screwdriver: 1pc

Product Usage Instructions

Installation Steps:

1. Insert base legs into base joint and screw together.
2. Ensure the gap on the beaver loop is facing downward. Use screws M6*12MM (10 pcs).
3. Insert castors into base leg holes, align them precisely.
4. Push castors into base leg holes using thumbs.
5. Insert base caps and cylinder into the base.
6. Attach arms to the seat.
7. Tilt control to seat and then attach the backrest to the seat.
8. Insert the headrest into the connector on top of the backrest, adjust height, and secure with screws.

Seat Adjustment:

• To Lower the Seat:
  1. Sit on the chair.
  2. Pull out the lever to unlock.
  3. Lift up the lever handle to lower the seat.
  4. Push in the lever to lock.
• To Raise the Seat:
  1. Pull out the lever to unlock.
  2. Stand up slightly, lift the lever handle to raise the seat.
  3. Push in the lever to lock and sit down.
• To Recline:
  1. Lay your back on the chair back, pull out the lever to unlock.
  2. Recline backward and push in the lever to lock.

Care and Cleaning:

1. Avoid placing near fire, wet, acidic, or corrosive environments. Prevent overexposure to sunlight.
2. Avoid using sharp or abrasive objects on the chair. Use gentle cleaning agents if needed.
3. Clean frame stains with warm water or appropriate surface cleaner.

Frequently Asked Questions

Q: What should I do if a part is missing or damaged?

A: Stop using the product and contact us immediately with your order ID and photo/video proof for assistance.

Q: How can I adjust the headrest height?

A: Insert the headrest into the connector on top of the backrest, raise it to the desired height, and secure it with screws provided.

Q: Can children use this chair?

A: It is recommended not to let children under 5 years old sit on the chair alone for safety reasons.

Parts

Installation Instruction

1. Insert base legs into base joint, screw together
2. Keep the gap on the castor loop down
3. Insert a little, make sure the castor precisely aligned with base leg hole
4. Push castor into base leg hole with both of your thumbs
   • If jammed, pull out the castor, switch to other castors then push it into holes again
5. Insert base caps and cylinder into base
6. Arms to seat
7. Tilt control to seat
8. Backrest to seat
9. Insert headrest into the connector (on the top of backrest), then raise headrest to its highest point; Screw the connector. Adjust headrest height

TILT/HEIGHT CONTROL

To Lower the Seat

1. Keep seated on the chair
2. Pull out the lever to unlock
3. Lift up the lever handle
4. Push in lever to lock

To Raise the Seat

1. Pull out the lever to unlock
2. Buttocks off the seat, then lift up the lever handle
3. Push in lever to lock, sit down

To Recline

1. Lay your back on the chair back. Pull out the lever to unlock
2. Press chair back with your back to tilt to 107° or 130°
3. Push in lever to lock

If sticks, press chair back with your back a little, then repeat the above steps

Recline backward

1. Your back off the chair back. Then, pull out the lever to unlock
2. Press chair back to 130° with your back.
3. Your back off the chair back again (chair back will automatically back to 95°)
4. Push in lever to lock

If sticks, press the chair back with your back a little,  then repeat the above steps

CARE AND CLEANING| 1.       Do NOT get it close to the fire or a wet,acidic and corrosive environment. Avoid overexposure to the sun.

2.       Do NOT use sharp or hooked objects to scrape the chair

3.       Do NOT use abrasive chemicals for cleaning.

4.       If the frame stained, wipe clean with warm water or pledge surface cleaner (available on Amazon).

5.       If squeaks, tighten screws underneath the seat.

---|---

NOTES AND

WARNINGS

| 1.     For one person to sit on. Do NOT stand on.

2.     Do NOT sit on the armrest in case of danger.

3.    Do NOT put overweight on the chair, or used as a trolley.

4.    Do NOT let the child sit on the chair alone if he is under 5 years old.

5.   To avoid danger of suffocation, keep plastic bag away from children.

6.    If parts missing, broken, damaged or wrong. Stop using this product until repairs are made using factory-authorized parts.

|

For parts missing or any quality issues, please message us via Amazon or email with your

order id + photo/video proof. We’ll respond within 24hours.

• support@dripex.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>