DRiPEX Q201 Mesh Office Chairs Instruction Manual

DRiPEX Q201 Mesh Office Chairs

Product Information

The product is a chair manufactured by Dripex. It comes with various components including a base joint, base legs, SGS cylinder, base joint cap, castors, tilt/height control, seat, arms, backrest, screws of different sizes, washers, headrest, headrest sticker, and screwdriver.

Product Usage Instructions

Parts and Hardware

Assembly

1. Step 1: Insert the base legs into the base joint and screw them together.
2. Step 2: Keep the gap on the castor loop down .
3. Step 3: Insert a little, make sure the castor precisely aligned with base leg hole.
4. Step 4: Push the castors into the base leg holes using both thumbs.If jammed, pull out the castor, switch to other castors then push it into holes again
5. Step 5: Insert the base caps and cylinder into the base.
6. Step 6: Arms to seat.
7. Step 7: Tilt control to seat.
8. Step 8: Backrest to seat.
9. Step 9: Assemble the headrest using the provided components.
10. Step 10: Use screws and washers to secure the headrest in place.

TILT/HEIGHT CONTROL

To lower the seat:

1. Keep seated on the chair.
2. Pull out the lever to unlock.
3. Lift up the lever handle to raise the seat.
4. Push in the lever to lock the seat in the desired position.

To raise the seat:

1. Pull out the lever to unlock.
2. Lift up the lever handle while lifting your buttocks off the seat.
3. Push in the lever to lock the raised seat position.

To recline:

1. Lay your back on the chair back.
2. Pull out the lever to unlock.
3. Push in the lever to lock the reclined position.
   If it sticks, press the chair back with your back slightly andrepeat the above steps.

To recline backward:

1. Pull out the lever to unlock.
2. Push in the lever to lock the reclined position.
3. If it sticks, press the chair back with your back slightly and repeat the above steps.

Care and Cleaning

1. Avoid exposing the chair to fire or wet, acidic, and corrosive environments. Also, avoid overexposure to sunlight.
2. Do not use sharp or hooked objects to scrape the chair.
3. Avoid using abrasive chemicals for cleaning. If the frame is stained, wipe it clean with warm water or pledge surface cleaner (available on Amazon).
4. If the chair squeaks, tighten screws underneath the seat.

Notes and Warnings

1. The chair is designed for one person to sit on. Do not stand on it.
2. Do not sit on the armrest to avoid danger.
3. Avoid putting overweight on the chair or using it as a trolley.
4. Do not allow children under 5 years old to sit on the chair alone.
5. Keep plastic bags away from babies and children to prevent suffocation.
6. If any parts are missing, broken, damaged, or incorrect, stop using the product and contact the manufacturer for repairs using authorized parts.

If you encounter any issues with missing parts or quality problems, please contact Dripex via Amazon or email with your order ID and provide photo/video proof. They will respond within 24 hours.
Contact Information: support@dripex.co.uk

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>