3nStar SC504 Barcode Scanner User Manual
- June 1, 2024
- 3nStar
Table of Contents
3nStar SC504 Barcode Scanner User Manual
SCANNER OVERVIEW
Note: Product appearance depends on goods
| LIGHT INDICATOR | BUZZER |
|---|---|
| LED Indicator | Beep Indication |
| Green light On | Three Beep |
| Explanation | Explanation |
| Decoding Successfully | Decoding Successfully |
| Power on | Power on |
CONNECTION GUIDE
USB cable
Installation | USB
- Plug the RJ45 connector of the USB cable to the Host interface on the Omnidirectional barcode scanner
- Connect the other end of the USB cable to an available USB port of the Host
- Switch on the Host. If connect properly,
RS232 cable
Installation | RS232
- Plug the RJ45 connector of the RS-232 cable to the Host interface on the Omnidirectional barcode scanner
- Connect the other end of the RS-232 cable to the serial port (DB9) on the device
- If the host does not have power supply (on DB9), connect thr external power supply (5VDC adapter) to the RS-232 cable
- Switch on the Host. If connect properly, the buzzer and the LED of the omnidirectional will indicate.
CABLE PLUG & UNPLUG
-
Plug as picture above
-
Press the buckle click, then pull out the cable
METHODS
Scanning methods:
Make sure all connection line are securely connected Move the bar code toward
the scan window.
Display the bar code anywhere with in the effective area of the scanner.
After the decoding is successful, the scanner will sing once and the LED will
flash once.
TRIGGER MODE
Press the trigger button once and switch to trigger mode temporarily.
When scanner is in trigger mode, pressing the trigger button makes the scanner
work.
If you haven’t ised trigger mode for a while, the scanner will revert to auto
mode.
PROBLEMS AND SOLUTIONS
| PROBLEM | POSSIBLE SOLUTIONS |
|---|---|
| Don’t work | Disconnect the power adapter and reconnect |
| Barcode is decoded, but not transmited to the host | Check the parameters |
(Waves) of thescanner and application
Unable to decode bar code| Please refer to thisbook if the code reading method
is wrong.Correct code reading in the manual.Whether the bar code is set to be
readableWhether the bar code is damaged, if the bar code is damaged Worse than
the scanner it self Reading ability, barcode will not be recognized to read.
KEYBOARD LAYOUTS
Configuration method: Scan the function bar code directly
US
French
Italian
German
Spanish
Russia
Turkish-Q
Turkish-F
UPC Setting
Configuration method: Scan the function bar code directly
Enable UPC-E convert to UPC-A
Disable UPC-E convert to UPC-A
Enable UPC-A convert to EAN-13
Disable UPC-A convert to EAN-13
URL Code
Configuration method : Scan the function bar code directly
Enable URL QR code
Disable URL QR code
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>