3nStar SC440 2D Wireless Barcode Scanner User Manual
- June 5, 2024
- 3nStar
Table of Contents
- 3nStar SC440 2D Wireless Barcode Scanner User Manual
- PARTS INSTRUCTION
- RECEIVER PAIRING
- INDICATOR DESCRIPTION
- Product Introduction
- Wireless Transmission Mode
- Data Transfer Mode
- Interface Type
- Sleep Time
- Language
- Terminator
- Receiver Pairing
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
3nStar SC440 2D Wireless Barcode Scanner User Manual
PARTS INSTRUCTION
RECEIVER PAIRING
- Scan the “Receiver Pairing Code ” on the base
- Factory Default: barcode scanner paired with base
INDICATOR DESCRIPTION
Indicator Type , __ ,_ | Details Description |
---|---|
Battery • • • • | Four bars , cha rging flash |
Wireless status * ( <·)> | Bluet oot h/ 2.4Gconnect ion |
Pairing (<·>) | Bluet oot h/ 2.4Gquick flash |
Scanner ring light 0 | One flash for one successful scanning |
Base ring light G | One flash for one successful data transferring |
Slo w flash for pairing mode
Product Introduction
This is the simple user’s manual, for detailed manual, please download from our website or contact the supplier. (With * is the Default Setting)
If scanner cannot be used normally due to an error setting, try to scan the “Fact ory Default ” code above
Buzzer Des.cnp 10n
Voice Type | Details Description |
---|---|
One medium long high voice | Su ccessful scanning or pairing |
Threecontinuous short voice | Alarm prom pt |
Wireless Transmission Mode
Data Transfer Mode
Interface Type
Sleep Time
Language
For more languages setting, please refer to the full manual.
Terminator
Receiver Pairing
Scanning the “Receiver Pairin g” code, scanner wil l enter the automatic pairin g mode for 1 minute, then re-insert the receiver to the host. There will be a sound heard when pairing successfully.
Scan the “Blueto ot h HID Pairing” barcode, the scan ner is ready to be connected by other bluet ooth devices.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>