babyhug Rapid Bicycle User Manual
- October 30, 2023
- babyhug
Table of Contents
**babyhug Rapid Bicycle User Manual
**
Features
- Disable metal frame allow from crater impact resistance
- Rubberised tyres for uadeciot grip Comas with hay cnckned
- Chain parr and bottle holder with bottle
- Height adjustable seat
- Training atotelshelps kids to balance and Icarn taster.
- Caliper Brakes with high quality brake cud:
- High quality ben mourned to enhance safety
Marled with f(*)as tor 10 & 16 inch bikes only
Attach Pedals
WARNING! The Pedals are Different, they have different threads for each side of the bicycle.
NOTE! Your pedals are in a separate box within the main carton.
NOTE! The pedalsJ & M have indication for Left & Right to match with crank. To prevent damage to the threads, only tighten the pedals in the direction indicated.
Attach Stabilisers (Training Wheels) in 14 & 16 Inch
Attach stabilisers
WARNING! Before the bike is ridden, the stabilisers must be correctly adjusted and then
Adjustment.
Remove the outer domed nut Y. Fit a stabiliser arm onto the axle making sure it snuggly fits .
Replace the domed nut and secure it finger tight to allow adjustment. Repeat for other side.
NOTE : If stabilisers are fitted correctly, the bike should rock a little side to side. If the stabilisers are both touching the ground all the time. your child will appreciate natural balance and will rely too heavily on them.
Attach Handle Bars
WARNING! When fitting the handlebar and stem assembly, make sure it is inserted properly.
Failure to observe this warning may result in serious personal injury.
Saddle Fitment
Insert the seatpost and saddle.
Insert the seat post into the seat tube.
Securing seatpost (Quick Release)
Secure the seatpost damp by tightening the seatpost Quick Release and the
pressing & locking the clamp of it.
WARNING!
When fitting the seatpost, make sure it is inserted properly. Failure to
observe this warning may result in senous personal injury.
Handlebar Bell Installation
- Remove screws from Bell.
- Position Bell on handlebar within easy reach. with hands on the handlebar grips.
- Install screws and tighten.
NOTE : Bell may attach with 1 or screws.
ROUT NE MAINTENANCE
NOTE!
In order to ensure the safety of the rider, regular checks should be made on
the brakes. tyre condition, steering (including the handlebar grips) and wheel
rims. If any components are found to be damaged or excessively worn they
should be immediately changed using genuine replacement parts.
Check on the following every 2 weeks:
- Lubricate the chain using a suitable light oil,
- Check all parts of the bike are securely fitted.
- Check that the tyres are in good condition.
- Check the condition of the brake blocks/pads.
- Check that the wheel spokes are tight.
WARNING
- These points are extremely important and should be read, understood and implemented before riding your bicycle. Failure to observe these warnings may result in serious injury and/or damage to the bike.
- These notes should be read and understood as the information may be useful to you in assembling of the bike.
- Representative images are used throughout this guide. Your bike may difer from that shown.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>