belkin WIZ019 2 In 1 Wireless Charging Pad User Guide

: June 14, 2024
: belkin

Table of Contents

belkin WIZ019 2 In 1 Wireless Charging Pad
Product Information
Product Usage Instructions
INSTRUCTION
POWER
Safety Instructions
FCC Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

belkin WIZ019 2 In 1 Wireless Charging Pad

belkin-WIZ019-2-In 1-Wireless-Charging-Pad-PRODUCT

Product Information

Specifications:

Model: BoostCharge Pro 2-in-1 Wireless Charging Pad With MagSafe
Power Delivery: 25W Power Delivery 3.0
Input Voltage: 100-240 Vac
Input AC Frequency: 50/60Hz
Output Voltage: 5.0V, 9.0V, 12.0V
Output Current: 3.0A, 2.77A, 2.08A
Output Power: 15.0W, 25.0W, 2S.OW
Average Active Efficiency: 81.49%
Efficiency at Low Load (10%): 73.39%
No-Load Power Consumption: 0.076W

Product Usage Instructions

Safety Instructions:

WARNING : Failure to follow these instructions may result in a fire, electric shock, injury, or damage to the user, product, or other property.

Plug the car charger into a nearby power source that is easily accessible and does not pose a disconnection problem.
Only use the product indoors, in a dry place, and avoid charging your device near a heat source.

Wireless Charging:

To charge your compatible devices wirelessly:

Connect the charging pad to a power source using the provided power supply.
Place your Qi-enabled device or MagSafe-compatible iPhone on the center of the charging pad.
Ensure proper alignment to establish a charging connection.
Your device will start charging wirelessly.

Power Delivery:

The BoostCharge Pro 2-in-1 Wireless Charging Pad supports Power Delivery 3.0 technology, allowing you to fast charge compatible devices.

Connect the charging pad to a power source using the provided power supply.
Connect your Power Delivery compatible device to the charging pad using a USB-C to Lightning cable (not included).
Your device will begin fast charging.

FAQ

Q: What devices are compatible with the BoostCharge Pro 2-in-1 Wireless Charging Pad?
A: The charging pad is compatible with Qi-enabled devices and MagSafe- compatible iPhones.
Q: Can I charge multiple devices simultaneously?
A: Yes, you can charge one device wirelessly on the pad and another device using the USB-C port.
Q: Does the BoostCharge Pro 2-in-1 Wireless Charging Pad come with a power supply?
A: Yes, a power supply is included with the charging pad.

BoostCharge Pro
2-in-1 Wireless Charging Pad With MagSafe 15W Station de recharge sans fil 2-en-1 avec MagSafe

SKU/MODEL : WIZ019
REFERENCE : WIZ019

Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste In electrical and electronic equipment (WEEE).
The barred symbol of the rubbish bin shown on the equipment Indicates that, at the end of its useful life, the product must be collected separately from other waste.
Therefore, any product that have reached the end of their useful life must be given to waste disposal centers specializing In the separate collection of waste electrical and electronic equipment or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented In the country.

Frequency band in which the radio equipment operates: 127.7 kHz, 360 kHz, 111-148 kHz
Maximum power transmitted: -1.81 dBμA/m @10m

UKCA Conformity:
We, Belkin International, Inc., declare that the radio equipment Is In compliance with Radio Equipment Regulations 2017, RoHS Regulations 2012, and WEEE Regulations 2013.
The full text of the UKCA declaration of conformity is available at the following Internet address: www.belkln.com/doc

Recycling programs for this packaging may not exist in your area.

Waste Electrical and Electronic Equipment Directive

For information on product disposal, please refer to http://www.belkin.com/uk/weee-regulatlons/
Pursuant to and In accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste In electrical and electronic equipment (WEEE).
The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.
Therefore, any product that has reached the end of its useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment or given back to the dealer when purchasing a new WEEE, pursuant to and In accordance with Article 14 as Implemented In the country.

Regulatory and Sustainability Information
NORTH AMERICA

INSTRUCTION

POWER

WARNING

Safety Instructions

WARNING : Failure to follow these Instructions could result In a fire, electric shock, Injury, or damage to the user, product, or other property.

Connect the power supply of the wireless charger to a power outlet that Is close by and Is easy to disconnect from.
Use Indoors and in a dry location only; Avoid charging near sources of heat or humidity.
Keep the wireless charger and power supply away from any liquids or moisture.
Unplug the wireless charger when not in use for long periods of time.
Do not store your device In very hot or very cold locations. It Is recommended to use your device at room temperature.
Do not use if visible defects are observed on the wireless charger or power supply.
Do not attempt to service, modify, or disassemble the wireless charger or power supply.
Use of a power supply not recommended or sold by Belkin may result in an increased risk of fire, electric shock, Injury, or damage to the user, product, or other property.
The wireless charging power transmission rate is regulated by the wireless charging device receiving power which can be Influenced by factors like, but not limited to, proprietary charging protocols, ambient temperature, current battery percentage level, and age of the device being charged.
CAUTION : If you experience problems with the wireless charger, please discontinue use, unplug the power supply from the socket, and contact Belkin for assistance.
The marking Information is located at the bottom of the apparatus.

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY
We. Belkin International, Inc., of 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA, Tel:+ 1(310) 751 5100, declare under our sole responsibility that this product complies with Part 15 of the FCC Rules. Operation Is subject to the following two conditions: (1) this device may not cause harmful Interference, and (2) this device must accept any interference received, Including Interference that may cause undesired operation. Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the Instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur In a particular Installation.

Information for end-users as per COMMISSION REGULATION (EU) 2019/1782

Manufacturer’sname or Trademark, commercial registration number and address|

Shenzhen Aoda Power Technology Co.,Ltd ,

Model identifier

|

A835·120208C·EU1, A835·120208C•UIC1

81.49″

Efficiency at low load(10″)(unit:%)|

73.39″

No-load power consumption (unit W)| 0.076W
The above information Is also available as part of EU declaration of conformity at lhe following Internet address· www.belkin.com/doc.

Belkin International, Inc. El Segundo, CA 90245, USA
Belkin Ltd., Unit 1, Regent Park, Booth Drive, Wellingborough, Northants NN8 6GR, United Kingdom
Belkin B.V., Herlkerbergweg 106, Plaza Arena – Jupiter, 1101 CM, Amsterdam, The Netherlands
Belkin Asia Pacific Ltd. Hong Kong
Belkin Ltd. Tuggerah, Australia
japansupport@belkln.com
Belkin Tech Support : www.belkln.com/support