KOLLEKTIV WERKS Toyota A90 Supra KW No Drill Center Mount License Plate Holder Instruction Manual
- June 17, 2024
- KOLLEKTIV WERKS
Table of Contents
KOLLEKTIV WERKS Toyota A90 Supra KW No Drill Center Mount License Plate
Holder Instruction Manual
installation guide
Component list: (not to scale)
IMPORTANT
To be installed in highlighted location only!
-
Insert back plate into of the grille and bolt together with front plate. Ensure writing is upright and arrows pointed upwards . ** Refer to APPENDIX A for installation pictures.
-
Install spacer and bracket as shown. Center bracket and tighten. Ensure writing is upright and arrows pointing upwards.
-
Install license plate to license plate bracket. Install M6x14mm bolts with a license plate cover otherwise use M6x8mm bolts.
-
Enjoy your new KW license plate holder!
APPENDIX A Installation reference pictures
-
Insert tie-wrap on TOYA90SUPB-B
-
Fold tie-wrap
-
Insert TOYA90SUPB-B in location as per reference picture.
-
Use tie-wrap to assist in placement
-
Insert and bolt on TOYA90SUPB-F
-
Remove tie-wrap and & install 2nd bolt. Do not over tighten bolts.
-
Ready for the spacer !!
-
For removal insert tie-wrap as pictured and reverse the installation process.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>