KOLLEKTIV WERKS SUB-ZN6BRZ-B No Drill Center Mount License Plate Holder Installation Guide
- June 12, 2024
- KOLLEKTIV WERKS
Table of Contents
KOLLEKTIV WERKS SUB-ZN6BRZ-B No Drill Center Mount License Plate Holder
Product Information
Specifications
- Product Name: No Drill Center Mount License Plate Holder
- SKU: SUBZC6B
- Compatibility: Subaru BRZ (ZC6 2013-2016)
- Material: Metal
- Color: Black
Product Usage Instructions
- Insert the back plate into the grille and bolt it together with the front plate. Ensure the writing is upright and the arrows point to the outside. Do not use a power tool and avoid over-tightening.
- Install the spacer and bracket as shown, centre the bracket, and tighten it. Ensure the writing is upright. Avoid using a power tool and over-tightening.
- Install the license plate onto the license plate bracket. Use M6x14mm bolts with a license plate cover, or M6x8 mm bolts for the plate only.
- Enjoy your new KW license plate holder!
FAQ
Q: Can this license plate holder be used on other car models?
A: This specific model is designed for Subaru BRZ (ZC6 2013-2016) and may not be compatible with other car models.
Q: Are there any special tools required for installation?
A: The package includes a KW 4mm Allen Key Tool for installation. No additional special tools are required.
Q: Is it necessary to use the foam pad or black vinyl screw head overlay?
A: The foam pad and black vinyl screw head overlay are optional accessories that can be used for aesthetic purposes, but they are not mandatory for installation.
Q: How should I clean the license plate holder?
A: To clean the license plate holder, use a mild detergent solution and a soft cloth. Avoid using abrasive cleaners that may damage the finish.
Bill of material: (scale 1:1)
Dimension
Component list
- Component list: (not to scale)
IMPORTANT!
- To be installed in the highlighted location only!
Assembly Side View
- Insert the back plate into the grille and bolt it together with the front plate.
- Ensure the writing is upright and the arrows point to the outside.
- DO NOT USE POWER TOOLS!
- DO NOT OVER TIGHTEN!
- Install the spacer and bracket as shown. Centre bracket and tighten.
- Ensure the writing is upright.
- DO NOT USE POWER TOOL!
- DO NOT OVER TIGHTEN!
- Install license plate to license plate bracket.
- Install M6x14mm bolts with a license plate cover otherwise use M6x8mm bolts.
- Enjoy your new KW license plate holder!
For customer support please email [email protected].