Kollektiv Werks VW-25TIGRL-B Drill Center Mount License Plate Holder Installation Guide
- June 5, 2024
- KOLLEKTIV WERKS
Table of Contents
Kollektiv Werks VW-25TIGRL-B Drill Center Mount License Plate Holder
Bill of material: (scale 1:1)
NOTE
DO NOT SCALE WHEN PRINTING. PRINT PDF AT “ACTUAL SIZE” SETTING.
Component list
(not to scale)
IMPORTANT!
To be installed in the highlighted location only!
Assembly Side View
-
Insert the back plate into the grille and bolt it together with the front plate. Ensure the writing is upright and the arrows point to the outside.
-
DO NOT USE POWER TOOLS!! DO NOT OVER TIGHTEN!!
-
Install the spacer and bracket as shown.
-
Centre bracket and tighten. Ensure the writing is upright. DO NOT USE POWER TOOLS!! DO NOT OVER TIGHTEN!!
-
Install license plate to license plate bracket.
-
Install M6x14mm bolts with a license plate cover otherwise us M6x8 mm bolts.
NOTE: Use a thin coat of anti-seize on the bolts during the winter season to protect from possible seizing/oxidation from the salts. -
Enjoy your new KW license plate holder!
For customer support please email support@kollektivwerks.com