ABAC G-812IG Pneumatic Air Compressor Tool kit User Guide

ABAC G-812IG Pneumatic Air Compressor Tool kit

Product Usage Instructions

Operating Procedures

1. Connect the compressed air supply to fitting A.
2. Connect the inflation fitting B to the valve of the wheel and check the pressure on gauge C.
3. Press the trigger D to inflate and keep checking the pressure on the gauge.
4. If the pressure is too high, press trigger D half-way to restore the correct pressure.
5. To avoid damages to the pressure gauge, do not let the tire inflator fall on hard surfaces.
6. Use one of the adapters included in the kit (E) to inflate bikes inner tubes, balls, or other devices.

Maintenance

• Disconnect the air supply during maintenance on the tool.
• Regularly clean and dry the filter in the system and the pneumatic tool air inlet opening.
• Lubricate any quick-disconnect coupling on the system to prevent jamming.
• Drain condensation from the air filter and from the compressor on a daily basis.
• Clean and lubricate the tool after each use to avoid rust formation and minimize wear.
• Check the tool regularly for loose bolts/screws or parts.
• In case of power loss, have the tool repaired by trained and qualified engineers only.

FAQ

• Q: How often should I clean the filter in the system?
  • A: It is recommended to clean and dry the filter regularly to ensure optimal performance.
• Q: Can I use the pneumatic kit for inflating other devices besides tires?
  • A: Yes, you can use the adapters included in the kit to inflate bikes inner tubes, balls, or other devices.
• Q: What should I do if the pressure is too high during inflation?
  • A: Press trigger D halfway to restore the correct pressure and avoid overinflating.

Technical Data

 |  |  |
---|---|---|---
 | Air pressure max| bar| 8
 | Nozzle diameter| [mm]| –
 | Suction cup.| [ml]| –
 | Air consumption| [l/s]| –
 | Sound pressure level (LPA) acc. to. EN ISO 15744| [dB(A]| –
 | Spray pipe lenght| [mm]| 400
 | weight.| [kg]| 0,3

Product Overview

MAX

• 8 bar
• 116psi

SAFETY PRECAUTIONS

SAFETY WARNINGS:

• Never point the tool at yourself or other persons.
• Do not use the tool improperly
• Always disconnect the tool when not in use.
• Keep the tool out of reach of children

WARNING:  WHEN USING THE TOOL, MAKE SURE THAT THERE ARE NO NAKED FLAMES OR FLAMMABLE FUMES IN THE WORKING ENVIRONMENT, WEAR A PROTECTIVE MASK AND ALWAYS DISCONNECT THE TOOL WHEN NOT IN USE.

OPERATING PROCEDURES

• Connect the compressed air supply to fitting A. Connect the inflation fitting B to the valve of the wheel and check the pressure on gauge C.
• Press the trigger D to inflate and keep checking the pressure on the gauge: if the pressure is too high, press trigger D half-way to restore the correct pressure.
• To avoid damages to the pressure gauge do not let the tire inflator fall on hard surfaces, in order to ensure a correct pressue value reading.
• Use one of the adapters included into the kit (E) to inflate bikes inner tubes, balls or other devices

MAINTENANCE

• Disconnect the air supply during maintenance on the tool.
• Regularly clean and dry the filter in the system and the pneumatic tool air inlet opening.
• Lubricate any quick-disconnect coupling on the system to prevent jamming.
• Drain condensation from air filter and from the compressor on a daily basis.
• In order to avoid rust formation and to minimize wear, clean and lubricate the tool after each use.
• Check the tool regularly on loose bolts/screws or parts.
• In case of power loss: have the tool repaired.
• Only trained and qualified engineers are allowed to adjust or repair the tool.

Package Content

• 1pcs bike adapter,
• 1pcs ball needle,
• 1pcs universal needle for inflating devices

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>