ABAC G-560A Sand Blasting Gun Instruction Manual
- June 1, 2024
- ABAC
Table of Contents
ABAC G-560A Sand Blasting Gun
Product Information
The air compressor is a versatile tool designed for various applications. It features an air inlet (A), trigger (B), nozzle (C), and suction cup (D).
Technical Specifications:
- Max Air Pressure: 8 bar
- Capacity: 1000 ml
- Nozzle Size: 2.5 mm
- Dimensions: 170 x 60 x 280 mm
- Connector Size: 1/4 inch
Product Usage Instructions
-
Safety Precautions:
Before operating the air compressor, ensure to read the manual and tool labels carefully. Follow all safety instructions provided. -
Setup:
Connect the air compressor to a suitable power source and ensure proper ventilation in the working area. -
Operation:
Turn on the air compressor and adjust the air pressure according to your requirements. Use the trigger to control the airflow and aim the nozzle at the desired surface. -
Maintenance:
Regularly clean and lubricate the components to ensure smooth operation. Check for any leaks or damage and address them promptly.
FAQ:
-
Q: What should I do if the air compressor is not building pressure?
A: Check for any clogs in the air inlet or nozzle, ensure all connections are secure, and adjust the pressure settings accordingly. -
Q: How often should I change the suction cup?
A: The suction cup should be replaced if it shows signs of wear or damage, typically every few months depending on usage.
Scan the QR code and download the full manual
DOWNLOAD Manual
https://www.abacaircompressors.com/en/manuals.
GENERAL VIEW
- A: Air Inlet
- B: Trigger
- C: nozzle
- D: suction cup
Read the manual and tool labels carefully. Read and follow all the instructions.
TECHNICAL SPECIFICATIONS
| Air pressure max | bar | 8 |
|---|---|---|
| Nozzle diameter | [mm] | 6 |
| Tank volume | [ml] | 1000 |
| Air consumption | [l/s] | 2,5 |
| size length x wide x height | [mm] | 170 x 60 x 280 |
| weight | [kg] | 0.75 |
| Air inlet (BSP) | [inch] | 1/4” i |
Declaration of compliance EEC
WE DECLARE THAT THE FOLLOWING PRODUCT
WAS BUILT IN COMPLIANCE WITH THE FOLLOWING DISPOSITIONS EST CONFORME AUX DISPOSITIONS SUIVANTES.
- 2006/42/EC Standard:
EN 11148-8:2011
AND WE AUTHORIZE
AARIAC S.r.l. – Via C. Colombo 3, Robassomero (TO) 10070 ITALY.
TO DRAW UP THE TECHNICAL FILE ON OUR BEHALF
UWE SCHRADER
General Manager for Purchasing
Maarten Van Acker
Product engineering
Engineering manager
Robassomero, 29/07/2019.