ABAC G-551A Paint Spray Gun User Guide
- June 1, 2024
- ABAC
Table of Contents
ABAC G-551A Paint Spray Gun
Product Information
Specifications
- Air pressure max: 3 bar
- Pressione pneumatica max.: 1.5 [mm]
- Maximaler Luftdruck: 1000 [ml]
- Pression d’air: 3.7 [l/s]
- Noise Level: 73 dB(A)
- Weight: 0.7 [kg]
- Dimensions: 1/4 inch
Product Usage Instructions
-
Safety Precautions
Before using the air compressor, make sure to read the manual and familiarize yourself with all safety instructions. Always wear appropriate safety gear such as goggles and gloves when operating the tool. -
Setup
Place the air compressor on a stable and level surface. Ensure it is connected to a power source that matches the specifications provided. Attach the necessary hoses and fittings securely. -
Operating the Air Compressor
Switch on the compressor using the designated power button. Adjust the pressure settings according to your requirements. Monitor the pressure gauge to ensure it stays within the recommended range. -
Maintenance
Regularly check and clean the air filters to maintain optimal performance. Lubricate moving parts as per the manufacturer’s recommendations. Keep the compressor in a dry and clean environment when not in use.
FAQ
-
Q: What should I do if the air compressor is making unusual noises?
A: If you notice any unusual noises coming from the compressor, turn it off immediately and inspect for any loose components or potential issues. Do not continue using it until the problem is resolved. -
Q: How often should I change the oil in the air compressor?
A: Refer to the user manual for specific guidelines on oil changes. Typically, it is recommended to change the oil after a certain number of operating hours or based on a visual inspection of the oil quality.
Scan the QR code and download the full manual
DOWNLOAD Manual
https://www.abacaircompressors.com/en/manuals.
GENERAL VIEW
- A: Air Inlet
- B: Trigger
- C: nozzle
- D: suction cupl
- E: intensity of the liquid flow
- F: width of the jet
Read the manual and tool labels carefully. Read and follow all the instructions.
TECHNICAL SPECIFICATIONS
| |
---|---|---
Air pressure max| bar| 3
Nozzle diameter| [mm]| 1,5
Suction cup| [ml]| 1000
Air consumption| [l/s]| 3,7
Sound pressure level (LPA) acc. to. EN ISO 15744| [dB(A]| 73
Spray pipe length| [mm]| –
weight| [kg]| 0,7
Air inlet (BSP)| [inch]| 1/4” i
Declaration of compliance EEC
WE DECLARE THAT THE FOLLOWING PRODUCT
WAS BUILT IN COMPLIANCE WITH THE FOLLOWING DISPOSITIONS EST CONFORME AUX DISPOSITIONS SUIVANTES.
2006/42/EC
- Standard: EN 1953:2013
AND WE AUTHORIZE
AARIAC S.r.l. – Via C. Colombo 3, Robassomero (TO) 10070 ITALY.
TO DRAW UP THE TECHNICAL FILE ON OUR BEHALF
UWE SCHRADER
General Manager for Purchasing
Maarten Van Acker
Product engineering
Engineering manager.
Robassomero, 29/07/2019.