ABAC G-532 Watering Gun User Guide
- June 1, 2024
- ABAC
Table of Contents
ABAC G-532 Watering Gun
Product Information
Technical Specifications
- Chuck Size: 4 – 13mm
- Dimensions: 280 x 30 x 200 mm
- Weight: 2 lbs
Product Usage Instructions
Before using the tool, make sure to read the manual and familiarize yourself with the tool labels.
Step 1: Preparation
Ensure the tool is connected to a power source compatible with its requirements. Check that the chuck is securely attached.
Step 2: Setting Up
Adjust the chuck size as needed for your specific task. Make sure all adjustments are done while the tool is unplugged.
Step 3: Operation
Power on the tool and carefully guide it to the workpiece. Apply consistent pressure and avoid excessive force to prevent damage.
Step 4: Safety Precautions
Always wear appropriate safety gear such as goggles and gloves. Keep your hands away from the chuck while the tool is in operation.
FAQ
- Q: How do I change the drill bit?
- A: To change the drill bit, first, ensure the tool is unplugged. Use the chuck key to loosen the chuck and remove the current bit. Insert the new bit and tighten the chuck securely.
- Q: What should I do if the tool overheats?
- A: If you notice the tool overheating, stop using it immediately and allow it to cool down. Check for any obstructions that may be causing the overheating.
Scan the QR code and download the full manual
DOWNLOAD Manual
GENERAL VIEW
- A: Air Inlet
- B: Trigger
- C: ferrule
- D: an inlet for water feeding pipe inlet
Read the manual and tool labels carefully. Read and follow all the instructions
TECHNICAL SPECIFICATIONS
| Air pressure max, | bar | 4 |
|---|---|---|
| Water feed hose connection, | 13mm | |
| Air consumption, | [l/s] | 2 |
| size length x wide x height, | [mm] | 280 x 30 x 200 |
| weight, | [kg] | 0.5 |
| Air inlet (BSP), | [inch] | 1/4” i |
| Air inlet (BSP), | [inch] | 1/4” I |
Declaration of compliance EEC
WE DECLARE THAT THE FOLLOWING PRODUCT
- ITEM NUMBER :
- ITEM DESCRIPTION :
- YEAR OF PRODUCTION
WAS BUILT IN COMPLIANCE WITH THE FOLLOWING DISPOSITIONS
- 2006/42/EC
- Standard: EN 1953:2013
AND WE AUTHORIZE
- AARIAC S.r.l. – Via C. Colombo 3, Robassomero (TO) 10070 ITALY
TO DRAW UP THE TECHNICAL FILE ON OUR BEHALF
Product engineering
Symbol