ABAC 12 G-101 Impact Wrench Kit User Guide
- June 1, 2024
- ABAC
Table of Contents
ABAC 12 G-101 Impact Wrench Kit
Product Information
- Pressure: 6.3 bar
- Drive Size: 1/2 inch
- Max Speed: 345 rpm
- No-load Speed: 7000 rpm
- Vibration: 4 m/s2
- Sound Level: 92.6 dB(A)
- Dimensions: 180 x 63 x 190 mm
- Weight: 2.8 kg
Product Usage Instructions
-
Safety Precautions
Before using the product, read the manual and tool labels carefully to ensure safe operation. Follow all safety instructions provided. -
Setup
Ensure the air compressor is placed on a stable surface with proper ventilation to prevent overheating. -
Operation
- Connect the air compressor to a power source.
- Adjust the speed regulator according to your requirements.
- Press the appropriate button (F for forward, R for reverse) for the desired direction.
-
Maintenance
Regularly check and maintain the oil levels, connections, and air intake to ensure optimal performance.
FAQs (Frequently Asked Questions)
-
Q: How do I adjust the speed on the air compressor?
A: Use the speed regulator button to increase or decrease the speed as needed. -
Q: What should I do if the air compressor overheats?
A: Allow the air compressor to cool down before using it again. Check for any blockages in the ventilation system.
Scan the QR code and download the full manual
DOWNLOAD Manual
https://www.abacaircompressors.com/en/manuals.
GENERAL VIEW
- A: Anvil
- B: Trigger
- C: Impact Sockets
- D: Oil
- E: connection
- F: Air Inlet
- G: Forward/Reverse Knob
- H: Speed Knob
Read the manual and tool labels carefully. Read and follow all the instructions.
TECHNICAL SPECIFICATIONS
| Air pressure max | bar | 6,3 |
|---|---|---|
| Socket drive | [inch] | 1/2” |
| Torque | [Nm] | 345 |
| Revolutions per minute | [min-1] | 7000 |
| Air consumption | [l/s] | 4 |
| Vibration level EN-ISO 28927-9 | [m/s2] | 2,8 |
| Sound pressure level (LPA) acc. to. EN ISO 15744 | [dB(A] | 92,6 |
| size length x wide x height | [mm] | 180 x 63 x 190 |
| weight | [kg] | 2,2 |
| Air inlet (BSP) | [inch] | 1/4” i |
Declaration of compliance EEC
WE DECLARE THAT THE FOLLOWING PRODUCT
WAS BUILT IN COMPLIANCE WITH THE FOLLOWING DISPOSITIONS EST CONFORME AUX DISPOSITIONS SUIVANTES
2006/42/EC
- Standard: EN ISO 11148- 6:2012
AND WE AUTHORIZE
AARIAC S.r.l. – Via C. Colombo 3, Robassomero (TO) 10070 ITALY.
TO DRAW UP THE TECHNICAL FILE ON OUR BEHALF
UWE SCHRADER
General Manager for Purchasing.
Maarten Van Acker
Product engineering.
Engineering manager.
Robassomero, 29/07/2019.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>