ABAC G-534 Plaster Spray Gun User Guide
- June 1, 2024
- ABAC
Table of Contents
ABAC G-534 Plaster Spray Gun
Product Information
- Specifications
- Pressure: 6.2 bar
- Motor Power: 4 / 6 / 8 HP
- Noise Level: 86 dBA
- Capacity: 4.2 cfm at 1/4 inch
- Weight: 1.2 kg
- Max Speed: 4500 rpm
Product Usage Instructions
- Safety Precautions
- Before operating the air compressor, ensure you have read and understood all safety instructions provided in the manual.
- Setup
- Place the air compressor on a flat, stable surface. Connect the power source following the guidelines in the manual.
- Adjusting Pressure
- Use the pressure adjustment knob to set the desired pressure level based on your requirements.
- Operating the Compressor
- Switch on the compressor and allow it to build up pressure. Monitor the pressure gauge to ensure it stays within the recommended range.
- Maintenance
- Regularly check and clean the air filters to ensure optimal performance. Follow the maintenance schedule outlined in the manual.
FAQs
- Q: How often should I change the oil in the air compressor?
- A: It is recommended to change the oil after every 500 hours of operation or as per the manufacturer’s guidelines.
- Q: Can this air compressor be used for painting projects?
- A: Yes, this air compressor can be used for painting projects. Ensure you have the appropriate tools and attachments for painting.
GENERAL VIEW
- A: Air Inlet
- B: Trigger
- C: nozzle
- D: suction cup
- E: knob product flow
- F: lever airflow
Read the manual and tool labels carefully. Read and follow all the instructions.
TECHNICAL SPECIFICATIONS
| Air pressure max | bar | 6,2 |
|---|---|---|
| Diamètre abuse | [mm] | 4 / 6 /8 |
| Matériau abuse | – | Hpb59- 1 |
| Air consumption | [l/s] | 4,2 |
| Air inlet (BSP) | [inch] | 1/4” |
| Sound pressure level (LPA) acc. to. EN ISO 15744 | [dba] | 86 |
| weight, peso, Gewicht | [kg] | 1,2 |
| Volume du réservoir | [ml] | 4500 |
Declaration of compliance EEC
- WE DECLARE THAT THE FOLLOWING PRODUCT
- WAS BUILT IN COMPLIANCE WITH THE FOLLOWING DISPOSITIONS EST CONFORME AUX DISPOSITIONS SUIVANTES 2006/42/EC
- Standard: EN 1953:2013
- AND WE AUTHORIZE
- AARIAC S.r.l. – Via C. Colombo 3, Robassomero (TO) 10070 ITALY
- TO DRAW UP THE TECHNICAL FILE ON OUR BEHALF
- UWE SCHRADER General Manager for Purchasing
- Robassomero, 29/07/2019
- Maarten Van Acker
- Product engineering
- Code 2809900152 rev1
Scan the QR code and download the full manual
- DOWNLOAD Manual https://www.abacaircompressors.com/en/manuals.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>