kdln Xl Montage Anleitung Kushi Table Light Instruction Manual

Table of Contents

Product Specifications:

Assembly Instructions:
Follow the provided assembly instructions for setting up the KUSHI XL TABLE. Ensure you have all the necessary components from Box N.1 and Box N.2 before starting the assembly process.
Dimmer Adjustment:
To adjust the brightness levels, apply slight pressure to switch the lamp on and off. Hold down the power button until the desired intensity is reached. To modify the minimum brightness level, press and hold the power button when the lamp is switched on. After 30 seconds, the lamp will turn off. Turn it back on to check the new minimum level. The dimmer offers three minimum levels, and you can repeat the adjustment process to change the level.
Bulb Information:
The KUSHI XL TABLE uses a 1x70W E27 (E26 US) bulb with energy efficiency ranging from class A++ to E. Ensure you use a compatible bulb for optimal performance.
Power Supply:
The lamp operates on a power supply of 220-240V for international use or 120V for US regions. Make sure to connect the lamp to the appropriate voltage to prevent damage.
Contact Information:
If you have any questions or need assistance, you can contact Kdln Srl at Viale L. da Vinci, 277, 20090 Trezzano sul Naviglio, Milano. You can also reach them via phone at +39 0236538950 or email at info@kdln.it .

Frequently Asked Questions (FAQ):

Q: Can I use a different wattage bulb with the KUSHI XL TABLE?
A: It is recommended to use a 1x70W E27 (E26 US) bulb as specified for optimal performance and safety.
Q: How do I know if the lamp is compatible with my country’s voltage?
A: The lamp supports both 220-240V and 120V power supplies, making it compatible with various regions. Ensure you connect it to the correct voltage based on your location.

ASSEMBLY INSTRUCTIONS

WARNING

Place the plastic gasket between the glass and the rod then screw the rod until blocking the glass. Don’t force to avoid creating strains on the glass.
The safety is guaranteed by the appropriate use of the following instructions, so you must keep them.
Always disconnect the main voltage before working on the appliance.
Never use abrasive products or aggressive detergents for cleaning the lamp.
If the external cable of this appliance is damaged, it must be replaced by the manufacturer, its after sales service or other equivalent qualified person only in order to avoid any danger.
KDLN will not provide a replacement until the nature of defect has been determined.

$kdln-Xl-Montage-Anleitung-Kushi-Table-Light-fig- $2$$

BOX N.1

$kdln-Xl-Montage-Anleitung-Kushi-Table-Light-fig- $3$$

BOX N.2

$kdln-Xl-Montage-Anleitung-Kushi-Table-Light-fig- $5$$

ASSEMBLY INSTRUCTIONS

Dimmer

A slight amount of pressure is required to switch the lamp on and off. To adjust the levels, hold down until the desired intensity is reached. Adjustment of the minimum: when switched on, press and hold the power button. After 30 seconds, the lamp will switch off. When it is switched back on, check the minimum level. The dimmer includes three minimum levels.
To change the level, repeat the procedure.

$kdln-Xl-Montage-Anleitung-Kushi-Table-Light-fig- $6$$