WHIRLPOOL ACM492 Air Conditioner User Guide

WHIRLPOOL ACM492 Air Conditioner

Product Information

Specifications

• Model: ACM492
• Brand: Whirlpool
• Part Number: 1159564 Rev. A

Air Conditioner Safety
Your safety is important to us. Please pay special attention to the following safety instructions:

• Read all instructions before using the air conditioner.
• Complete the installation requirements as described in the Installation Instructions.
• Do not operate the air conditioner with the front panel removed.
• Never clean air conditioner parts with flammable fluids. The fumes can create an explosion or fire hazard.
• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

Parts and Features
The air conditioner comes with the following parts and features:

• Front panel
• Air filter
• Installation label (model and serial number label)

Operating Your Air Conditioner
Starting your air conditioner

1. Make sure the air conditioner is properly installed and connected to the power supply.
2. Turn on the power switch located on the unit or use the remote control.
3. Select the desired temperature and fan speed using the control panel or remote control.

Changing air direction

1. Locate the air direction adjustment feature on the control panel or remote control.
2. Adjust the air direction by selecting the desired angle or direction.

Caring for Your Air Conditioner
Cleaning the front panel

1. Turn off the air conditioner and unplug it from the power supply.

2. Gently remove the front panel by following the instructions in the user manual.

3. Clean the front panel using a soft cloth and mild detergent.

4. Dry the front panel thoroughly before reattaching it to the unit. Cleaning the air filter

5. Turn off the air conditioner and unplug it from the power supply.

6. Locate the air filter on the unit.

7. Remove the air filter and clean it by rinsing it with water or using a vacuum cleaner.

8. Allow the air filter to dry completely before reinstalling it.

Performing annual maintenance

1. Turn off the air conditioner and unplug it from the power supply.
2. Inspect the unit for any visible damage or wear.
3. Clean the condenser coils and fins using a soft brush or vacuum cleaner.
4. Check and tighten any loose screws or connections.

Saving energy
To save energy while using your air conditioner, consider the following tips:

• Set the temperature to a comfortable level rather than excessively low or high.
• Close doors and windows to prevent cool air from escaping.
• Use curtains or blinds to block direct sunlight.
• Keep the air filter clean for optimal airflow.

Troubleshooting
Normal operating sounds
It is normal for the air conditioner to produce certain sounds during operation. These include:

• Humming or buzzing sounds from the compressor.
• Airflow sounds from the fan.

Requesting Assistance or Service
If you need assistance or service for your air conditioner, please contact our Consumer Assistance Center using the following toll-free number: 1-800-253-1301

FAQ

Q: Where can I find the model and serial number of my air conditioner?
A: You can find the model and serial number on the installation label located on the unit. Please refer to the diagram on page 4 of the user manual for the exact location.

Q: What should I do if my air conditioner is not cooling properly?
A: If your air conditioner is not cooling properly, check the following:

• Ensure that the temperature and fan speed settings are appropriate for your cooling needs.
• Clean the air filter and ensure it is properly installed.
• Check for any obstructions or blockages in the air vents or condenser coils.
• If the issue persists, contact our Consumer Assistance Center for further assistance.

Q: Can I use flammable fluids to clean the air conditioner?
A: No, it is important not to clean the air conditioner parts with flammable fluids as they can create a fire hazard. Use a soft
cloth and mild detergent for cleaning.

Warranty
For warranty information, please refer to page 16 of the user manual.

A Note to You

Thank you for buying a WHIRLPOOL@ appliance. Because your life is getting busier and more complicated, WHIRLPOOL Air Conditioners are easy to use, save time, and help you manage your home better. To ensure you enjoy years of trouble-free operation, we developed this Use and Care Guide. It contains valuable information about how to operate and maintain your appliance properly and safely. Please read it carefully. Also, please complete and mail the OwnershipRegistration Card provided with your appliance. This card helps us notify you about any new information on your appliance.

Please record your model’s information

Whenever you call to request service on your appliance, you need to know your complete model number and serial number. You can find this information on the model and serial number label (see the diagram on page 4 for the location of the label). Please also record the purchase date of your appliance and your dealer’s name, address, and telephone number.

• Model Number __
• Serial Number __
• Purchase Date __
• Dealer Name __
• Dealer Address _____
• Dealer Phone __

Keep this book and the sales slip together in a safe place for future reference.

Air Conditioner Safety

Your safety is important to us.
This guide contains statements under warning symbols. Please pay special attention to these symbols and follow any instructions given. Here is a brief explanation of the use of the warning symbol.

WARNING
This symbol alerts you to such dangers as fire, electrical shock, burns, and Personal Injury.

IMPORTANT SAFETY INSTRUCTIONS

WARNING
To reduce the risk of fire, electrical shock, or Injury when using your air conditioner, follow these basic precautions:

• Read all instructions before using their conditioner.
• Complete the installation requirements as described in the Installation Instructions.
• Do not operate the air conditioner with the front panel removed.
• Never clean air conditioner parts with flammable fluids. The fumes can create an explosion or fire hazard.
• FOR YOUR SAFETY
• DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. THE FUMES CAN CREATE A FIRE HAZARD OR EXPLOSION.

SAVE THESE INSTRUCTIONS

Help us help you Please

• Make sure the air conditioner is not used by anyone unable to operate it properly.
• Maintain the air conditioner properly.
• Install your air conditioner in a window that will hold the weight, and secure the air conditioner according to the Installation Instructions.
• Connect the air conditioner to the proper kind of outlet with the correct electrical supply and grounding. (See the Installation Instructions.) Also, remove the Energy Label. Use a damp cloth to take off any glue residue. DO NOT use sharp instruments, flammable fluids, or abrasive cleaners. These can damage the material.
• Make sure the air conditioner is the correct size for the area you want to cool.
• Use the air conditioner only to do what a window air conditioner is designed to do.

Parts and Features

This was a pas ac tiare illustrated no what pie o sit. To help you familiarize information on specific parts or features quickly, page references are Included.

Operating Your Air Conditioner

In order to obtain the best possible results from your air conditioner, it is important that you operate it properly. This section will tell you how to do just that.

Starting your air conditioner

WARNING

****Fire Hazard Do not use an extension cord. Doing so can result in death, fire, or electrical shock.

Set the switch to Cool. NOTE: If you turn your air conditioner off, wait at least three minutes before turning it back on or you may blow a fuse or trip a circuit breaker.

WARNING

Electrical Shock Hazard Plug Into a grounded 3-prong outlet. Do not remove the ground prong. Failure to follow these instructions can result in death or electrical shock.

Changing air direction
The louvers, in the top grille area of the air conditioner, control the direction of the cooled air. Move the tab, at the top left of the louvered area, in the direction you want the air to go (right, left, or straight ahead).

Caring for Your Air Conditioner

Proper maintenance of your air conditioner will help ensure longer life and lower operating costs. This section will tell you how to clean your air conditioner and perform annual maintenance. You can always call your authorized Whirlpool service dealer for an annual checkup.

Cleaning the front panel
WARNING

****Explosion Hazard Unplug the power cord from the outlet before cleaning the air conditioner. Use only nonflammable cleaners. Failure to follow these instructions can result in death, explosion, fire, or electrical shock.

1. Unplug the power cord.
2. Remove the front panel from the air conditioner for cleaning. Press down at the top of the front panel to release it from the top of the cabinet.
3. Pull the top of the front panel toward you. Tabs
4. Lift the front panel up and away from the bottom spring clips.
5. Remove the air filter and clean it separately. (See “Cleaning the air filter” on page 8.)
6. Clean the front panel with warm water, mild soap, or detergent and a soft cloth. Rinse and dry thoroughly.
7. Wipe the control panel clean with a soft, dry cloth.
8. Replace the front panel. Locate the bottom of the panel on the spring clips. Press down on the top edge of the front panel and push it toward the unit to secure the upper tabs.
9. Plug in the power cord.

Cleaning the air filter
The filter is clean. A clean filter helps remove dust, lint, and other particles from the air. Check every two weeks to see if filter needs cleaning.

1. Unplug the power cord.
2. Remove the front panel from the air conditioner. (See “Cleaning the front panel” on page 7.)
3. Remove the elastic band holding the filter in place. Remove filter.
4. Clean the filter using a vacuum cleaner. OR If very dirty, wash the filter with warm water and mild detergent. Air dry thoroughly before replacing.
5. Replace the filter, elastic band, and front panel.
6. Plug in the power cord.

Performing annual maintenance
Your air conditioner needs annual maintenance to help ensure steady, top performance throughout the year. Call the service company recommended by your dealer to:

• Inspect and clean the coils and condensate water passages.

• Check fan. The compressor and fan motor are sealed and need no oiling. The expense of annual inspection is the customer’s responsibility.
  OR

• If you are familiar with electrical appliances, you can do the cleaning and maintenance yourself. If you choose to do so, follow the steps on page 9. NOTE: Do not lift, push, or pull any white beaded foam (expanded polystyrene) parts. 8

WARNING

****Electrical Shock Hazard Unplug the power cord from the outlet before servicing. Be sure no liquid gets Into the motor, electrical control box, or compressor terminals. Failure to follow these instructions can result In death, electrical shock, or serious Injury.

1. Unplug the power cord.
2. Remove the air conditioner from the cabinet. Watch out for the sharp metal fins on the front and rear coils.
3. Remove the front panel. (See “Cleaning the front panel” on page 7.)
4. Wrap the motor, electrical control box, and compressor terminal box in plastic film to make sure no water or other liquid gets inside. Water or other liquids could damage insulation and cause serious mechanical problems.
5. Clean and hose out the base, coils, and condensate pans. Clean at least once a year, or more often if the condenser coils and pans collect dirt, sand, leaves, insects, or algae. Also, clean if you detect an odor coming from the air conditioner. Do not use the collected water for drinking purposes. It is not sanitary.
6. Remove plastic film from motor and electrical parts.
7. Replace the air conditioner in the cabinet.
8. Replace the front panel.
9. Plug in the power cord.

NOTE : It is a good idea to wait 24 hours before starting the air conditioner again. This allows time for all areas to dry thoroughly. Saving energy

• You can help save energy by following the tips below.
• Improve your home’s insulation. Seal all doors and windows. Close the fireplace flue.
• Close all blinds and drapes on the sunny sides of the house. Add window awnings.
• Keep the air filter clean.
• Do not block the airflow with drapes or furniture.
• Ventilate the attic. High temperatures in the attic add to the air conditioner’s cooling load.
• Try not to use heat-producing appliances during the hottest part of the day.
• Turn off lights and appliances when they are not needed.
• Keep heat registers and cool-air returns closed.
• Use exhaust venting fans when cooking, doing laundry, or bathing.

Troubleshooting

Listed in the chart below are the most common problems consumers run into with their air conditioners. Please read through this chart before calling tor service. It could save you the cost of a service call.

Normal operating sounds
When your air conditioner operates normally, you will hear sounds such as:

• Droplets of water hitting the condenser, causing a “pinging” or “clicking” sound. Water droplets help to cool the condenser.
• Air movement from the fan. Sounds also may be caused by house construction – such as vibration of the unit due to wall construction or unsteady window mounting area.

Requesting Assistance or Service

Before calling for assistance or service, please check “Troubleshooting” on page 10. It may Vsave you the cost of a service call. If you still need help, follow the instructions below.

If you need assistance

Call the Whirlpool Consumer Assistance Center telephone number. ~lal toll-free from anywhere m the U.S.A.: 1-800-253-1301 and talk with one of our trained consultants. The consultant can instruct you in how to obtain satisfactory operation from your appliance or, if service is necessary, recommend a qualified service company in your area. If you prefer, write to: Mr. William Clark Consumer Assistance Representative Whirlpool Corporation 2000 North M-63 Benton Harbor, Ml 49022-2692 Please include a daytime phone number in your correspondence.

*If you need service …**

Whirlpool has a nationwide network of authorized Whirlpool service companies. Whirlpool service technicians are trained to fulfill the product warranty and provide after-warranty service, anywhere in the United States. To locate the authorized Whirlpool service company in your area, call our Consumer Assistance Center telephone number (see Step 1) or look in your telephone directory Yellow Pages under:

APPUANCE HOUSEHOLOMAJOR,
SERVICE & REPAIR – See: Whirlpool Appliances or Authorized Whirlpool Service (Example: X’fZ Service Co.)

WASHING MACHINES & DRYERS, SERVICE & REPAIR
See: Whirlpool Appliances or Authorized Whirlpool Service (Example: X’fZ Service Co.)

When asking for help or service
Please provide a detailed description of the problem, your appliance’s complete model and serial numbers, and the purchase date. (See page 2.) This information will help us respond properly to your request.

If you need FSP® replacement parts …
FSP is a registered trademark of Whirlpool Corporation for quality parts. Look for this symbol of quality whenever you need a replacement part for your WHIRLPOOL® appliance. FSP replacement parts will fit right and work right, because they are made to the same exacting specifications used to build every new WHIRLPOOL appliance. To locate FSP replacement parts in your area, refer to Step 2 or call the Whirlpool Consumer Assistance Center number in Step 1.

If you are not satisfied with how the problem was solved …

• Contact the Major Appliance Consumer Action Program (MACAP). MACAP is a group of independent consumer experts that voices consumer views at the highest levels of the major appliance industry.
• Contact MACAP only when the dealer, authorized servicer, and Whirlpool have failed to resolve your problem. Major Appliance Consumer Action Program 20 North Wacker Drive Chicago, IL 60606
• MACAP will in turn inform us of your action.

Warranty

Service under the full warranties must be provided by an authorized Whirlpool service company. 6/94 WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Outside the United States, a different warranty may apply. For detalls, please contact your authorized Whirlpool dealer. If you need service, first see the “Troubleshooting” section of this book. After checking “Troubleshooting,” additional help can be found by checking the “Requesting Assistance or Service” section, or by calling our Consumer Assistance Center telephone number, 1-800-253-1301, from anywhere in the U.S.A.PART NO.1159564 Rev. A
© 1995 Whirlpool Corporalion Registered Trademark of Whirlpool, U.S.A.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>