ORBIT 57915 B-HYVE SMART WIFI INDOOR SPRINKLER TIMER QUICK START GUIDE

ORBIT 57915 B-HYVE SMART WIFI INDOOR SPRINKLER

Contents in the Box

• Wi-Fi Indoor Sprinkler Timer
• Screwdriver
• Mounting Screws and Anchors
• Transformer
• Quick Start Guide
• Conduit Cover

FCC and IC Statement

This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help This device meets the FCC and IC requirements for RF exposure in public or controlled environments. The end user is advised to maintain a distance of 20 cm from the controller and any personnel to ensure compliance with RF exposure regulations.

This Class B digital apparatus complies with Canadian ICES-003

The B-hyve™ App

Install the B-hyve™ app on your smart device

You will need a smart device to connect the timer to Wi-Fi.

Note: The app will guide you through the initial setup of your sprinkler timer. In addition, there are help icons throughout the app with more information and useful tips.

Specifications

Transformer ratings

Input:

• Australia— 240V AC 50/60Hz 23W
• Europe— 230V AC 50/60Hz 23W
• USA— 120V AC 60Hz 23W
• Output: 24V 750 mA

Timer ratings

Input/Output:

AUS & EU—26V AC 750 mA 50/60 Cycle USA—24V AC 750 mA 60Hz

Timer Temperature Operating Range

Operating: 32-158° F (0–70° C)

Storage & transport: -4–176° F (-20–80° C)

Timer Humidity Operating Range

Operating: 0–80%

Storage & transport: 0–90%

Altitude: 6,500′ (2,000 meters)

• Installation Class II
• Over Voltage Category II

This timer works with any standard 24V irrigation solenoid.  The internal fuse is non-replaceable.

Help

If the app and the website don’t have what you’re looking for, please call our technical support line before returning this sprinkler timer to the store. 1-800-488-6156 or 1-801-299-5555
www.orbitonline.com
bhyve.orbitonline.com

Acts as a hub for other B-hyve™ products

Timer Installation

Select a location

Choose a location near power and away from direct sunlight, if possible.
This location should also have a good Wi-Fi signal. You can check this using a smart phone. (Find a location that has a minimum of two bars)

Note: If replacing a timer, it is helpful to take a photo of the wires before you remove them from the old timer.

Mount the timer

Install a screw (included) into the wall. Use the expanding anchors (included) for plaster, masonry or drywall installations. Hang the timer on the installed screw using the keyhole slot. Level the timer and use the second screw in one of the preformed mounting holes to secure the timer.

Connect Valve Wires

Prepare wire

Strip 1/2″ (13 mm) of insulation from each wire.

Connect wires

Attach one wire from each valve to a “Common” (COM) wire and the other wires to a numbered terminal (only one wire per terminal.)

Timer Installation–Connecting to Wi-Fi

Plug in your Orbit® B-hyve™ timer

Once your B-hyve™ timer is plugged into the power source, it will automatically look to pair with your smart device. They  will begin to blink blue. This indicates that your timer is ready to pair with your smart device. Ensure that your smart device has Bluetooth® turned on.

Connect to your Orbit® B-hyve™ timer

Open your B-hyve™ app, create an account or log in, and follow the step-by- step process to add and set up your device. The B-hyve™ app will connect to your device and you will, then, be guided to connect to your home Wi-Fi network.

Connect to your Wi-Fi network

Select your network from the list and enter the password for the network to connect your timer to your Wi-Fi signal. When connected, they will illuminate solid white indicating a successful pairing.

Note: If you do not see your network name in the list, tap the refresh button in the app. If your network name still does not appear, tap “Advanced” in the app and enter your network name and password. This device will only connect through 2.4 GHz Wi-Fi networks. 5.0 GHz networks are not supported and will not appear in your app.

FOR OPTIMUM TIMER PERFORMANCE, CONNECT TO WIFI TO RECEIVE THE LATEST TIMER UPDATES.

Programming and Operation

Programming the timer

The app has help screens and videos to assist you with Wi-Fi connections, programming, smart watering, and other general questions you may have.

Note: Your programmed schedules are stored both in the app and on the timer. Watering will continue if the Wi-Fi connection is lost.

Manual Operation

All programming and full functionality of the timer is available in the B-hyve™ app. If you have the need, there are some basic operations you can perform directly at your timer.

MANUAL WATERING

| Hold until  (water ALL stations) appears, then release. Quickly press again until the desired station appears.

Default watering is 10 min. per station.

CANCEL STATION| Press once to cancel the current station.
RAIN DELAY| Set in the app;  blinks yellow and d appears.
ON/OFF| Hold for 10 sec. until turns white.
HARD RESET| Quickly press  5 times.

FREQUENTLY ASKED QUESTIONS

What is the Orbit 57915 B-hyve Smart Wi-Fi Indoor Sprinkler Timer?

The Orbit 57915 B-hyve is a smart indoor sprinkler timer that allows you to control and automate your sprinkler system using your smartphone or other smart devices.

Does the Orbit 57915 B-hyve require a Wi-Fi connection?

Yes, the Orbit 57915 B-hyve requires a Wi-Fi connection to connect to the B-hyve app and enable remote control and scheduling features.

How many zones can the Orbit 57915 B-hyve control?

The Orbit 57915 B-hyve can control up to 12 zones, allowing you to customize watering schedules for different areas of your lawn or garden.

Can I create custom watering schedules with the Orbit 57915 B-hyve?

Yes, you can create personalized watering schedules based on specific days, times, and durations for each zone using the B-hyve app.

Does the Orbit 57915 B-hyve have weather-based watering adjustments?

Yes, the Orbit 57915 B-hyve uses local weather data to automatically adjust watering schedules, taking into account factors like rainfall and temperature.

Can I control the sprinkler system remotely with the Orbit 57915 B-hyve?

Yes, you can remotely control and monitor your sprinkler system using the B-hyve app from anywhere with an internet connection.

Is the Orbit 57915 B-hyve compatible with voice assistants?

Yes, the Orbit 57915 B-hyve is compatible with voice assistants such as Amazon Alexa and Google Assistant, allowing you to control your sprinkler system with voice commands.

Can I manually start or stop watering with the Orbit 57915 B-hyve?

Yes, you can manually start or stop watering for individual zones directly from the B-hyve app or through the device itself.

Does the Orbit 57915 B-hyve provide water usage insights?

Yes, the B-hyve app provides water usage data and insights, allowing you to track and manage your water consumption more effectively.

Does the Orbit 57915 B-hyve have a rain delay feature?

Yes, the Orbit 57915 B-hyve has a rain delay feature that automatically adjusts watering schedules when rain is detected, helping to conserve water.

Can I receive notifications and alerts from the Orbit 57915 B-hyve?

Yes, the B-hyve app can send you notifications and alerts about watering schedules, rain delays, system updates, and other important information.

Is the Orbit 57915 B-hyve easy to install?

Yes, the Orbit 57915 B-hyve is designed for easy installation and can replace most standard indoor sprinkler timers without rewiring.

Does the Orbit 57915 B-hyve have a backup battery?

Yes, the Orbit 57915 B-hyve has a built-in backup battery that retains your programming and settings in case of power outages.

Can I integrate the Orbit 57915 B-hyve with other smart home devices?

Yes, the Orbit 57915 B-hyve is compatible with smart home platforms like Amazon Alexa, Google Assistant, and Apple HomeKit, allowing for seamless integration with other smart devices.

Can I monitor and control multiple Orbit 57915 B-hyve timers from one app?

Yes, you can manage and control multiple Orbit 57915 B-hyve timers from the same B-hyve app, providing convenient control over multiple sprinkler systems.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:ORBIT 57915 B-HYVE SMART WIFI INDOOR SPRINKLER TIMER QUICK START GUIDE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>