AIRHOT TT-300 Under Desk Treadmill Instruction Manual

AIRHOT TT-300 Under Desk Treadmill

Please read the instructions carefully before using them.

Note: When you receive the treadmill and use it, please add an appropriate amount of lubricating silicone oil to the running belt.

• AIRHOT will wholeheartedly solve any problems you encounter during use!
• lf you encounter any problems, please contact us in time.

Thank you for purchasing our product, our products will help to improve your health.

Security cautions

• To ensure your safety and avoid accidents, please read the instructions carefully before use.
• This product is indoor use only, please do not make it or use it outdoors; the treadmill should be placed in a flat and clean position, do not put it on a thick carpet or near a water area, there should be 3-6ft barrier-free safety area behind the treadmill.
• This product is for adults, minors need adult care. It is forbidden for those who feel unwell or mentally handicapped or lack common sense to use it. Unless they are under the supervision or guidance of the person responsible for their safety regarding the use of the product.
• If the power cord is damaged, to avoid danger, it must be replaced by the manufacturer or professional maintenance personnel.
• This product is only used for 110V-120V / 220V – 240V / 100V AC voltage. Please use the power socket with a safe ground line. The installation and grounding of the grounding plug must be consistent with the parameters of the user’s area. If the plug and socket are incompatible, please arrange for qualified electricians or after-sales personnel to handle it.
• Check all parts before use to ensure that the screw and nut are locked.
• When using it, please wear comfortable and tight clothes to avoid the clothes being hung by the machine. Don’t let children or pets come near to avoid accidents.
• Avoid all moving parts with both hands. Do not place hands or feet in the space under the running belt.
• This product is designed for family use only, but not suitable for professional training and testing, and can not be used for medical purposes.
• The heart rate display of this product does not provide data for medical purposes.
• This product is only for one person on the running belt.
• Before cleaning and maintenance, please shut down and unplug the power plug.
• Shut down the machine and unplug the power plug when you leave.
• Please use the spare parts provided by the original factory. It is strictly forbidden to replace them privately.
• This product is of HC grade, and the maximum user’s weight is 265 lbs/120kg.

Quality Assurance Commitment

• We ensure that the product is made of high-quality materials.
• In normal use, if there is a problem, we will be responsible for the warranty.
• The warranty period is one year (from the date of purchase). If you buy products with quality problems, please contact our customer service within 12 months. Please do not deal with them without permission.
• The following are not covered by the warranty:
• Damage caused by external factors.
• Use non-original accessories.
• Privately handled incorrectly.
• Not following the instructions.
• This pledge is valid only for private use by families and does not apply to professional training such as gyms.

If you need to buy non-warranty accessories, please contact customer service. Please provide the following information when ordering:

• Instructions.
• Product model.
• Fittings serial number.
• Certificate of purchase date.
• Before the confirmation of our customer service, please do not send the products to our company, and send them back without permission. Our company does not bear any cost.

Configuration list and technical parameters

1. Walkingpad configuration
2. Technical parameters
   Para Name| Parameters
   ---|---
   Packing Dimension| 56.329.756.5 inch 14375.516.5 cm
   Folded Dimension| 53.226.44.9 inch 1356712.5 cm
   Unfolded Dimension| 48.826.441.34 inch 12467105 cm
   Running Area| 1738.8 inch 4398.5 cm
   Maximum Power| 550W
   Speed Range| 0.6-7.6 MPH / 1-12 KPH
   Max Capacity| 265LBS/120KG
   Net/Gross Weight| 60.3LBS ;70 LBS / 27.35KG; 31.75KG
3. National Applicable Unit

United States

Canada

| Inch| Mile| 110V-120V
 | Inch| Mile| 110V-120V
United Kingdom| Centimetre| Kilometre| 220V-240V
Europe| Centimetre| Kilometre| 220V-240V
Australia| Centimetre| Kilometre| 230V
Japan| Centimetre| Kilometre| 100V

Product parts

Assembly instructions

Assembly steps
Step1:Column armrest assembly

1. Open the packing box, remove the relevant accessories and machine from the box, and place the machine on a flat floor, without assembly.
2. To lift the handle it can’t be removed anymore.
3. Hold the column tube with one hand turn the lock switch back and forth in one hand, and hit the OFF position (the left and right sides operate the same). Column armrest.
4. Push the iPad bracket to the OPEN direction, rotate it outward, and then release it to LOCK to limit it.

Machine assembly completed

Folding steps

Step 2: fold the handle down to the plate.

1. Hold the column tube with one hand, turn the lock switch forward in one hand, and hit the ON position (the left and right sides operate the same)
2. Push the iPad bracket to the OPEN direction, rotate it inward, and then release it to LOCK to limit it.

Step 3: Hold the column tube with your hand and fold it back to lay it flat.

Machine folding completed

Instructions for use

• Use a walking machine Plug in the power, turn on the power switch, and the switch will light up, then you will hear a “beep” and, the instrument will light up.

Safety lock
The treadmill will only work if the safety lock is completely placed on the slot on the dashboard. Clip the clip of the safety lock to your clothes. In the unlikely event of an accident, pull off the safety lock to immediately stop the motor. If you want to continue using the treadmill, put the safety lock back.

Function description

Display Panel

Remote controller

Operation instructions Functioning

1. Remote START/STOP, speed increase/decrease.
2. Instrument knob functions（START/Pause, speed increase/decrease）
3. Emergency stop switch（STOP)
4. Two-in-one design: column unfolding treadmill function; column folding walker function.
5. Speed display range 0.6-7.6 mph / 1-12 kph，Calories range 0001-9999KCAL， Time range 01-99MINUTES， Distance range 0.01-99 mph / 0.01-99 kph.
6. Hibernation time 5 minutes without operation, the LED tube flickers every second after hibernation.

Remote control instructions

• Button: when the machine stands, press the Button machine runs from 0.6 mph / 1 kph, press again it will stop again.
• (START/STOP is a switch button)
• + Button: when machine running,press +button, the speed will increase 0.2mph / 0.5kph; long press will continually increase by 0.2mph / 0.5kph.
• － Button: when the machine running, press the －button, the speed will decrease by 0.2mph / 0.5kph; long press will continually increase by 0.2mph / 0.5kph.
• P.S.: The remote control can only operate at speeds up to 3.8 miles/km per hour.
• If the speed needs to reach more than 3.8mph / 1-6km speed, you need to use the instrument knob switch to operate.

Dashboard function

Operation function

Turn on the power, all windows will light up for 2 seconds, and then enter the standby state. Closing the red safety lock switch, press“ ”button， After a countdown of 3 seconds, the treadmill starts running from the lowest speed； Rotate the clockwise“ ” knob， speed up； Rotate the counterclockwise“ ” knob，Slow down (speed is accelerated by 0.2mile / 0.5km or Decelerate); to stop running, press“ ”button or disconnect the red safety lock switch directly, the machine will stop slowly.

Dormancy function

When there is no operation for more than 5 minutes when stopped, the system will shut down all the displays and enter a dormancy state. Operate any key of the knobs for the remote control and instrument panel to wake up the treadmill for standby. Emergency stop switch function
When the emergency stop switch is turned off at any time, the treadmill will stop running quickly and all data will be cleared to 0. The corresponding window displays “—– “. All normal operations and operations must be carried out with the emergency stop switch closed.

Warm-up exercise

Before exercising, it’s better to do stretching exercises first. A successful exercise plan must include warm-up, aerobic and relaxation exercises. The number of exercises should be at least two or three times a week. You can take a day off for exercise. After a few months, you can increase the number of exercises to four to five days a week. Warm-up is an important part of your fitness exercise. Warm up before every exercise. Moderate warming-up can prepare your body for the next more intense exercise because warming-up can help muscles warm up and stretch, improve blood circulation and pulse, and send more oxygen into muscles. Repeated warm-up exercise can also reduce muscle soreness after aerobic exercise. We recommend the following warm-up and relaxation exercises.

1. Stretch downward: Bend your knees slightly and bend your body forward slowly. Relax your back and shoulders and touch your toes with both hands. Hold for 10 to 15 seconds, then relax. Repeat three times. Figure 1
2. Stretch your ankles: Sit on a clean cushion and straighten one leg. Put the other leg inward so that it is close to the straight leg. Try to touch your toes with your hands. Keep it for 10 to 15 seconds. Then relax. Repeat each leg three times. Figure 2
3. Extension of the calf and foot tendons: body forward hands against the wall the left leg arches forward, the right leg is straight, the left leg is on the ground, then bend your left leg and hold it for 10 to 15 seconds, then relax, repeat each leg three times. Figure 3
4. Head movement: 1-tilt your head to the right and feel the left neck muscle stretch; 2-turn head to the back; turn your head to the left; 4-turn your head to the front of the chest. then relax and do it three times. Figure 4
5. Waist movement: stretch your arms to the left and right, then slowly lift them, over your head. Put your right arm as far as possible to the ceiling. Straighten, hold for 1 second, and feel the stretch of your right muscle. Repeat the same action on the left arm. Figure 5

Maintenance guide

Warning: Be sure to unplug the power plug of the machine before maintaining the product.

• Use a cloth to clean the product surface.
• Full cleaning will prolong the service life of the machine.
• Clean the dust regularly to keep the parts clean. Clean the exposed parts on both sides of the running belt. This will reduce the accumulation of impurities in the running belt. Keep your sneakers clean. Avoid bringing foreign bodies under your running belt and wearing your running board and belt. The surface of the running belt should be scrubbed with a soapy wet cloth. Please be careful not to splash water on the electrical components and under the running belt.
• Check and lock all parts of the treadmill regularly, replace defective parts and/or leave the equipment idle for repair.

Adjusting the Running Belt
Adjust the running belt method

Running with a left bias

Adjustment method: With the power turned off, take a 5mm hexagon wrench and turn the right rear roller bolt 1/4 turn to the right to tighten the running belt. Then the machine is powered on and the test running belt is centered. Follow this method until the running belt is loosely adjusted to the centre.

Running with a right bias

Adjustment method: With the power turned off, take a 5mm hexagon wrench and turn the right rear roller bolt 1/4 turn to the right to tighten the running belt. Then the machine is powered on and the test running belt is centered. Follow this method until the running belt is loosely adjusted to the centre. The running belt will be loose after using it for some time. If the running belt is too loose, the running belt will slip during use.

Adjustment method: With the power turned off, take a 5mm hexagonal wrench and turn the left and right bolts of the rear drum 1/4 turn to the right at the same time to tighten the running belt. Then the machine is powered on to test the tightness of the running belt. Follow this method until the tightness of the running belt is moderate.
Note: When you use a treadmill, the pressure on the running belt is not balanced due to the different forces exerted by the two feet during running, causing the running belt to deviate from the centre. This kind of deviation is normal. When no one is running on the running belt, it will return to the centre. The running belt cannot be adjusted too tight. This will damage the running belt, increase the pressure on the front/rear rollers, cause damage to the roller bearings, etc., and cause abnormal noise or other problems.

Add lubricating oil to the walking machine

The walking machine is lubricated when it leaves the factory. However, it is necessary to check the lubricity of the treadmill frequently, which will help the treadmill to be kept in the best condition. The treadmill must be lubricated after half a year of use or 80 hours of operation. After every 30 hours or 30 days of use, pull the starting belt from the side and reach out to touch the surface of the treadmill as much as possible. If you feel the silicone oil, you don’t need to add lubricating oil; if you touch the surface, there is a strong dry feeling, Please follow the instructions below to add lubricating oil. Note: Please use special lubricants for treadmills or directly contact our company.

• The refuelling position is on the lower surface in the middle of the running belt. (As shown below)

• Cut the mouth of the oil bottle into a small mouth, not too large, and be able to inject.

• Raise the running belt so that the oil bottle is extended to the bottom of the running belt and the oil is injected
  into the middle of the running board. Put down the running belt, press the oil injection part with your hand, and rotate the running belt to spread the oil evenly on the running board.

• After turning on the machine, wait one minute for the oil to be applied evenly, and then use the treadmill.

Note: Please turn off the power of the machine before refuelling the running belt.

Trouble Code

E01

| ****

Poor communication between the electronic meter and controller

| 1. Check that the connection between the electronic meter and the controller is not properly connected.

2. The main IC of the controller contacts badly and is re-tightened.

3. The controller power supply is abnormal, change the controller

E02

| ****

Explosion-proof and impact-proof protection

| 1. If the motor is open or in bad contact, replace the motor or check the connecting terminals.

2. Power tube breakdown, replace it or the controller

E05| Over current protection| 1. Overload.

2. The resistance of the treadmill is too heavy and needs to be lubricated.

3. The motor is damaged, replace it

E06| Overload protection

E10

| ****

Keyboard and panel control connection communication failure

| 1. Check if the connection between the electronic watch and the controller is poorly connected.

2. The controller plug is not in good contact and is re-inserted.

3. The controller power supply is abnormal and the controller is replaced.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>