KDLN Toot Table Lamp Instruction Manual

KDLN Toot Table Lamp

Product Information

• Product Name: TOOT SUSPENSION
• Designer: Karim Rashid
• Revision: 03 – April 2022
• Manufacturer: Kdln Srl
• Address: Viale L. da Vinci, 277, 20090 Trezzano sul Naviglio, Milano
• Contact: +39 0236538950, info@kdln.it.
• Website: kdln.it

Assembly Instructions

1. Open BOX N.1 and find 3 items.
2. Open BOX N.2 and find 2 items.
3. Ensure the maximum thickness of item .3 is 20mm.
4. Connect the BLACK and RED LED wires.
5. Press the N L button to activate LED 1-10.
6. Arrange the items according to the provided diagram (see manual).
7. Follow the numbered sequence to assemble the product:
8. Attach item 1 to item 4.
9. Attach item 2 to item 7.
10. Attach item 3 to item 12.
11. Attach item 8 to item 11.
12. Attach item 9 to item 2.
13. Attach item 10 to item 9.
14. Attach item 1 to item 1.
15. Attach item 4 to item 4.
16. Attach item 5 to item 5.
17. Attach item 6 to item 6.
18. Attach item 7 to item 7.
19. Attach item 8 to item 8.
20. Clean the LED tubes and replace bulbs if necessary.
21. The LED board has the following specifications:
    • 3 x 5W
    • 2700K
    • 1500lm
    • CRI>80
22. The product operates on a voltage range of 110-240V.

MODEL

INSTALLATION

• BULBS, LAMPADINE, AMPOULES, LEUCHTENMITTEL, BOMBILLAS, ТИП ЛАМПОЧКИ board LED 3 x 5W – 2700K – 1500lm – CRI>80
• FEEDING, ALIMENTAZIONE, ALIMENTATION, SPANNUNG, TENSION DE RED, НАПРЯЖЕНИЕ 110-240 V

CONTACT

• Kdln Srl Viale L. da Vinci, 277
• 20090 Trezzano sul Naviglio, Milano
• T. +39 0236538950
• info@kdln.it.

References

• KDLN | Lampade di Design e Illuminazione

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>