kdln NAMI LED Glass Pendant Lamp Instruction Manual
- June 12, 2024
- kdln
Table of Contents
kdln NAMI LED Glass Pendant Lamp
WARNING
The safety is guaranteed by the appropriate use of the following instructions,
so you must keep them. Always disconnect the main voltage before working on
the appliance. Never use abrasive products or aggressive detergents for
cleaning the lamp. If the external cable of this appliance is damaged, it must
be replaced by the manufacturer, its after sales service or other equivalent
qualified person only in order to avoid any danger. Kundalini will not provide
a replacement until the nature of defect has been determined.
WHAT’S IN THE BOX
INSTALLATION INSTRUCTION
ASSEMBLY INSTRUCTIONS
Dimmer
Connect the dimmer cables to the inputs of the terminal board, labeled with
the label “dim + dim -”. The lamp only accepts 1-10V or 10V PWM dimmer signal.
Note: If the dimmer is set to the minimum, the lamp will not turn off. To turn
off the lamp, insert an ON-OFF switch on the line cable.
Kdln Srl Viale L. da Vinci, 277 20090 Trezzano sul Naviglio, Milano T. +39 0236538950 info@kdln.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>