Kdln KUSHI 16 Suspension Lamp Instruction Manual

June 12, 2024
kdln

Kdln KUSHI 16 Suspension Lamp

Product Information

Brand Kundalini
Product Name Kushi Mobile
Designers Alberto Saggia & Valerio Sommella
Revision Rev.01 – March 2022
Box Contents Box N.1 and Box N.2
Bulb Type LED
Bulb Specifications 1 x 1.3W – 2700K – 150lm
Power Source 5V min 500mA – Rechargeable battery
Manufacturer Kdln Srl
Address Viale L. da Vinci, 277 20090 Trezzano sul Naviglio, Milano
Contact T. +39 0236538950

[email protected]
Website| kdln.it

Product Usage Instructions

To assemble the product:

  1. Insert the diffuser onto the electrical structure.
  2. Securely screw the tige on the top of the electrical structure until the diffuser is blocked.

To use the product:

  1. Switch on the lamp using the switch located on the base of the lamp.
  2. To recharge the lamp, insert the supplied USB cable (Micro-B type) into a charger and leave it charging.
  3. The charging process is complete when the light A is turned off.

WARNING

  • The safety is guaranteed by the appropriate use of the following instructions, so you must keep them.
  • Always disconnect the main voltage before working on the appliance.
  • Never use abrasive products or aggressive detergents for cleaning the lamp.
  • If the external cable of this appliance is damaged, it must be replaced by the manufacturer, its after sales service or other equivalent qualified person only in order to avoid any danger.
  • Kundalini will not provide a replacement until the nature of defect has been determined.

What in box

Kdln KUSHI-16-Suspension-Lamp-fig 1

Installation

Kdln KUSHI-16-Suspension-Lamp-fig 3

WARNING
Don’t force to avoid creating strains on the glass.Kdln KUSHI-16-Suspension-
Lamp-fig 4

Power on/off

Connection

ASSEMBLY INSTRUCTIONS
Insert the diffuser upon the electrical structure. Fix screwing the tige on the top of the electrical structure to the point where the diffuser is blocked.

How to use

Switch on the lamp with the switch positioned on the base of the lamp. To recharge the lamp insert the supplied USB cable (Micro-B type) in a charger and leave it charging. The charge is complete when the light A is turned off.

Kdln Srl Viale L. da Vinci, 277
20090 Trezzano sul Naviglio, Milano
T. +39 0236538950
[email protected]
kdln.it

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

kdln User Manuals

Related Manuals