kaiboaudio Buds Plus TWS BC Earbuds User Manual

kaiboaudio Buds Plus TWS BC Earbuds

Thank you

Thank you for purchasing a pair of Kaibo Buds!

To give us feedback, find out more about upcoming product releases, and join our growing community, please connect with us on social media!

What’s in the box

• charging case: 1 piece

• removable ear fins:1 pair

• USB Type-C charging cable 1 piece

• carrying pouch: 1 piece

Note: The pictures in this manual are all schematic diagrams, which may deviate from the actual product; please refer to the actual product.

Quickly Set Up Your Buds Plus

Charging:

• Earphones charging:
  When you hear ‘ Battery low” ,the headset needs to be charged. Place earphones in the charging case and close the cover to charge them. When earphones is charging, the red light keeps on. After earphones are fully charged, the indicator is off.

• Case charging:
  Charge the case through the Type -C charging cable. When charging, the red light of the case blinks, and the red light is off after it is full.

• Pairing :
  When opening the cover of the case, red and green lights of the two earphones alternately blink to enter the automatic pairing mode, then you can enter the Bluetooth search state.

• Connect:
  Activate the Bluetooth settings of your phone or other device, search for the bluetooth name “Buds Plus”, click the phone to connect to bluetooth, hear the voice prompt “connect”, it means that the bluetooth connection is successful, then light is off If earphones are not connected to bluetooth for more than 3 minutes, earphones will automatically shut down.
  The left and right earphones can be separately connected to other Bluetooth devices.

Smart Touch Guide

Voice direct arouse
Set-Up| Turn On| PRESS each bud for 7 seconds (left and right buds need to be

turned on separately)

Turn Off| PRESS left or right bud for 7 seconds
Remove Existing Bluetooth Connections| Press both earbuds for 10 seconds at the same time in the off state
Note: The volume adjustment function(Volume+/-)can be simultaneously operated by the phone or driven by the Voice Assistance.

LED Indicator Guide

Charging Level

Battery Level

Earbuds low battery| Earbuds built-in voice prompt or Red blinks every 10 seconds
---|---
Case low battery| Red blinks 3 times when case closed
Case full battery| Greenstays on for 10 seconds and goes out when case opened or closed
Note: After unplugging the power plug, the LED will go out

Bluetooth Pairing

Note. Case does not support fast charging When the charging case 1s covered, buds are charging.

Product Specification

Bluetooth version:VS.2Stereo
Bluetooth communication protocol: HSP, HFP, A2DP, AVRCP
Headset battery capacity70mA| Charging case battery capacity:S00mA
Headset charging time: about 15 hours| Charging case charging time: about 1 hour
Headset usage time:

Music plays for about 7 hours(average measured data at 70% volume); The call lasted about 7 hours. (Charging case can charge headset for about 3 to 4 times)

Microphone sensitivity:- 40dB±2dB| Headset waterproof rating: IP55
Headset weight:15.Sg| charging case weight:51g

Storage and Maintenance

• The earphones can resist water and sweat, but not completely waterproof. Do not immerse the earphones into water.

• Listening to music at too high volume may  damage your hearing

• After a long time of storage, please charge it again before use.
  Keep the charging port dry before charging. This will reduce the risk of damage to earphones.

• Be careful not to place earphones in excessively cold, hot, or humid environments. Otherwise, the battery life will be shortened

• The charging case’s voltage/electric current is 5V/1A

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Non-modification Statement:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

**** For the first time use this product, please fully charge it to give you a better experience. If you do not use it for a long time, please charge it at least once a month to extend the battery life.

CUSTOMER SUPPORT

Still have questions?
We’re here to help!
Check out our online FAQs at
www.kaiboaudio.com
@kaiboadi

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>