kdln 250 Tripod Floor Lamp Light Instruction Manual
- June 17, 2024
- kdln
Table of Contents
kdln 250 Tripod Floor Lamp Light
Product Information
Specifications
- Product Name : TRIPOD FLOOR & TABLE
- Designer: CHRISTOPHE PILLET
- Maximum Wattage:
- TRIPOD Floor: 3x70W max – E27
- TRIPOD Table: 3x40W max – E12
- Power Supply: 220-240 V
- Manufacturer: Kundalini
- Contact Information: Kdln Srl Viale L. da Vinci, 277 20090
- Trezzano sul Naviglio, Milano
- Tel : +39 0236538950
- Email : [email protected]
- Website: kdln.it
Product Usage Instructions
Assembly Instructions
Follow the provided assembly instructions to set up the TRIPOD FLOOR &
TABLE lamp. Ensure all components are securely connected.
Power Connection
Plug the lamp into a power outlet with the specified voltage of 220-240V.
Use appropriate bulbs as per the maximum wattage mentioned for each type (E27
for Floor, E12 for Table).
Placement
Choose a suitable location for the TRIPOD lamp, ensuring it is placed on a
stable surface. The Floor and Table versions may have different placement
requirements due to their design.
Usage
- Operate the lamp using the designated switches or controls.
- Adjust the lighting as needed for your space.
FAQ
-
Q: Can I use higher wattage bulbs than recommended?
A: It is not recommended to exceed the maximum wattage specified for the TRIPOD FLOOR & TABLE lamps as it may cause damage to the product. -
Q: How do I clean the lamp?
A: Use a soft, dry cloth to gently wipe the lamp surface. Avoid using harsh chemicals or abrasive materials that may damage the finish.
ASSEMBLY INSTRUCTIONS
TRIPOD FLOOR & TABLE
WARNING
- The safety is guaranteed by the appropriate use of the following instructions, so you must keep them.
- Always disconnect the main voltage before working on the appliance.
- Never use abrasive products or aggressive detergents for cleaning the lamp.
- If the external cable of this appliance is damaged, it must be replaced by the manufacturer, its after sales service or other equivalent qualified person only in order to avoid any danger.
- Kundalini will not provide a replacement until the nature of defect has been determined
ASSEMBLY INSTRUCTIONS
- BULBS,
- TRIPOD floor 3x70W max – E27
- TRIPOD table 3x40W max – E12
- FEEDING, 220-240 V
Kdln Srl Viale L. da Vinci, 277
- 20090 Trezzano sul Naviglio, Milano
- T. +39 0236538950 [email protected]