Guessky SDA004 Executive Office Chair Big Instruction Manual

Guessky SDA004 Executive Office Chair Big

Scan the QR code to watch the installation video.

Accessories List

Notice
[If any questions, contact [email protected]/[email protected]]

• Do not stand in this chair or use the chair as a step ladder use it as a chair only. This chair is designed for one person to use at a time.
• Do not use this chair unless all bolts, screws, and knobs are firmly secured.
• This chair is designed for one person to use at a time, weighing up to 300Ib (136kg).
• Check all bolts, screws, and knobs every 90 days. Tighten them if any are loose.
• Failure to follow these instructions may result in serious injury or death of yourself and people around you.
• Some of the parts are heavy and/or have sharp edges, please install them carefully to avoid hurting you and the people around you.

Instruction For Use

Thanks for purchasing our products. Please read this manual before assembly. And please assemble in order. After the assembly, keep the instructions properly. Make sure all the parts are included (14 kinds in total).

Assembly Instruction

Step 1
Take out Split Base Tube (3) and Central Base Tube (2). Insert Split Base Tube (3) into Central Base Tube (2) as shown. You can see there are screw holes. Align with the holes, tighten 5 Screws M6X25 (13) with Hexagon Wrench (11) to fix 5 Split Base Tube (3) to Central Base Tube (2). Repeat it 5 times. Finally, attach the Central Base buckle (1) to the Central Base Tube (2).

Step 2
Take out Castors (4). Insert Castors (4) into part of Step 1 as shown. There are 5 Castors (4) that need to be inserted.

Caution:
Confirm Castors (4)must be inserted deeply. Otherwise, the castors could easily fall out and the chair could fall. Take out Air Rod (5). Put Air Rod (5) into the hole of Central Base Tube (2)as shown. Put it aside and we’ll use it in step 5.

Step 3
Fix the Base Plate (6) to the bottom of the Seat Cushion (9). Tighten the 4 Screws M6X25(12) with Hexagon Wrench (11) firmly.

Step 4

• Tighten the 8 Screws M6X25 (14) with Hexagon Wrench (11) and fix the 2 Armrests (7) between Backrest (8) and Seat Cushion (9), Tighten the 8 screws firmly and then cover the screws with 8 Decoration Caps (10).
  

• Caution: Do not tighten the bolts before the product is fully assembled.

• Caution: When you connect the armrest with the cushion, if the hole position of the armrest is not aligned with the hole position of the cushion, please force the armrest to align with the hole position of the cushion and install the screw.

Step 5
Pick up the Step 2’s Air Rod (5) and Central Base Tube(2). Insert the Air Rod (5) into Step 3’s Base Plate (6). There’s a hole in the middle of the Base Plate(6). Press the Seat Cushion(9) from top to bottom, and use your whole body’s strength to insert it firmly, the assembly is complete now.

• Caution: If the Air Rod (5) isn’t inserted into Base Plate (6) firmly, it’s likely to fall off when the chair rises.
• Caution: After the product is fully assembled, check the screws for tightening.

Activate Your Warranty Now!
We guarantee you a pleasant buying experience. Please scan the QR code to activate your warranty so that you can enjoy priority better after-sales service.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>