Guessky SDA005 Big and Tall Office Chair Desk Chair Instruction Manual

Guessky SDA005 Big and Tall Office Chair Desk Chair

Accessories List

Instruction for Use

Notice If any questions, contact Guessky-service@outlook.com/Guessky-Spt@outlook.com] Do not stand in this chair or use the chair as a step ladder use it as chair only. This chair is designed for one person to use at a time. This chair is designed for one person to use at a time, weighing up to 300lb (136kg). Do not use this chair unless all bolts, screws and knobs are firmly secured. Check all bolts, screws and knobs every 90 days. Tighten them if any are loose. Failure to follow these instructions may result in serious injury or death of yourself and people around you. Some of the parts are heavy and/or have sharp edge, please install it carefully to avoid hurting youand people around you.

Thanks for purchasing our products. Please read this manual before assembly. And please assemble in order. After the assembly, keep the instructions properly. Make sure all the parts are included (17 kinds in total).

Assembly Instruction

Please assemble in a wide and flat place

Step 1

Take out Split Base Tube (3) and Central Base Tube (2). Insert Split BaseTube (3) into Central Base Tube (2) as shown, You can see there are screw holes. Align with the holes, tighten Screw M6×25 (13) with Hexagon Wrench (12) to fix 5 Split Base Tube (3) to Central Base Tube (2). Repeat it 5 times. Finally, attach the Central Base Buckle (1) to the Central Base Tube (2).

Step 2

Take out 5 Castors (4). Insert 5 Castors (4) into part of Step 1 as shown. Take out Air Rod (5). Insert Air Rod (5) into the hole of Central Base Tube (2) as shown. Put it aside and we’ll use it in Step 5.
*Caution: Confirm Castors (4) must be inserted deeply, Othenwise the castors could easily fall out and the chair could fall down.

Step 3

Fix Base Plate (6) to the bottom of Seat Cushion (9). Tighten the Screw M6×25 (16) with Hexagon Wrench (12) firmly.

• Caution: There is a FRONT sticker on the front of Seat Cushion (9)

Step 4

First pick up the Air Rod (5) and the Center Base Tube(2) from step2. Insert them into the Base Plate (6), the Base Plate(6) has holes in the middle. Press the Seat Cushion (9) from top. Then connect the Backrest (8) and Steel Plate(10) and tighten the Screws M6×25 (17) with Hexagon Wrench (12). Connect the Backrest (8) with Steel Plate(10) and Seat Cushion (9) and tighten the Screws M8x25 (15) with Hexagon Wrench(12).

Step 5

Tighten the Screw M8x45 (14) with Hexagon Wrench (12) and fix the 2 Armrests (7) between Backrest (8) and Seat Cushion (9), Tighten the Screws firmly and then cover the Screws with Decoration Caps N1&N2 (11). position he us on, plet she ree with the usin with hole position the cushion and stale with the hole
*Caution: After the product is fully assembled, check the screws for tightening.

Activate Your Warranty Now!

We guarantee you a pleasant buying experience. Please scan the QR code to activate your warranty so that you can enjoy priority better after-sales service.

Scan the QR code to watch the installation video.

INSTALLATION VIDEO

Documents / Resources

| Guessky SDA005 Big and Tall Office Chair Desk Chair [pdf] Instruction Manual
SDA005 Big and Tall Office Chair Desk Chair, SDA005, Big and Tall Office Chair Desk Chair, Tall Office Chair Desk Chair, Office Chair Desk Chair, Chair Desk Chair, Desk Chair
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>