GUESSKY SDA033 Executive Office Chair Instruction Manual
- June 14, 2024
- Guessky
Table of Contents
SDAO33
Assembly Instruction
INSTALLATION VIDEO.
https://aftersale.qingtong123.com/landingpage/index.html?landing_page_id=156
Accessories List
Notice [If any question, contact Guessky-service@outlook.com / Guessky-Spt@outlook.com] Do not stand in this chair or use the chair as a step ladder
use it as chair only. This chair is designed for one person to use at a time.
This chair is designed for one person weighing up to 300Ib(136kg).
Do not use this chair unless all bolts, screws and knobs are firmly secured.
Check all bolts, screws and knobs every 90days.Tighten if any are loose.
Failure to follow these instructions may result in serious injury or death of
yourself and people around you.
Some of the parts are heavy and/or have sharp edge, please install it
carefully to avoid hurting you and people around you.
Instructions for Use
Thanks for purchasing our products. Please read this manual before assembly.
And please assemble in order. After the assembly, keep the instruction
properly.
Make sure all the parts are included (17 kinds in total).
Assembly Instruction
Step 1
Take out Split Base Tube(3). Central Base Tube(2) and Central Base
Buckle(1).Insert Split Base Tube(3) into Central Base Tube(2) as shown. You
can see there are screw holes. Align with the holes, tighten Screws
M6X25mm(13) with Hexagon Wrench (12) to fix 5 Spllit Base Tube (3) to Central
Base Tube (2).
Repeat it five times. Finally, attach the Central Base buckle (1) to the
Central Base Tube (2)
Step 2
Take out Castors (4). Insert Castors (4) into part of Step 1 as shown.
There are 5 Castors(4) need to be inserted.
- Caution: Confirm Castors(4)must be inserted deeply. Otherwise the castors could easily fall out and the chair could fall down.
Take out Air Rod (5).Put Air Rod(5) into the hole of Central Base Tube(2)as shown. Put it aside and we’ll use it in Step 5.
Step 3
Fix Base Plate (6) to the bottom of Seat Cushion (9). Tighten the Screws
M6X25(16) with Hexagon Wrench (12) firmly.
Step 4
First pick up the air rod (5) and the center base tube (2) from step 2. Insert
the air rod (5) into the base plate (6), the base plate (6) has holes in the
middle. Then fasten the Backrest (8) with steel plate (10) and tighten the
M6X25 (17) screws with Hexagon Wrench (12). Connect the cushion (9) and steel
plate (10) and tighten the M8X25 (15) screws with Hexagon Wrench (12).
Step 5
Tighten the Screws M8X45(14) with Hexagon Wrench (12)and fix the 2 armrests
(7) between the backrest (8) and the seat cushion (9) .Tighten the 4 screws
firmly and then cover the screws with Decoration Caps(11).The assembly is
complete now.
- Caution: When you connect the armrest with the cushion, if the hole position of the armrest is not aligned with the hole position of the cushion, please force the armrest to align with the hole position of the cushion and install the screw.
- Caution: After the product is fully assembled, check the screws for tightening.
Activate Your Warranty Now!
We guarantee you a pleasant buying experience.
Please scan the QR code to activate your warranty so that you can enjoy
priority better after-sales service.
https://aftersale.qingtong123.com/landingpage/index.html?landing_page_id=156
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>