DORMAN 928-581 Front Passenger Side Power Window Regulator Instruction Manual

DORMAN 928-581 Front Passenger Side Power Window Regulator

Product Information

Specifications

• Product Name: Suspension Stabilizer Bar Bracket Kit
• Model Number: 928-581
• Manufacturer: Dorman Products, Inc.

Product Usage Instructions

1. Step 1: Safely raise the vehicle.
2. Step 2: Remove stabilizer bar links and stabilizer bar from the vehicle.
3. Step 3: Remove stabilizer bar brackets and bushings from the bar. Cut brackets and bushings using a suitable tool without damaging the bar.
4. Step 4: Remove bushings and adhesive completely from the stabilizer bar. Use a razor blade and wire wheel if needed. Prepare the bar surface with paint as necessary.
5. Note: Ensure the bar surface is smooth, and free of corrosion, rough surfaces, and tool marks before installation to prevent premature bushing wear.

Installation Instructions

1. Step 1: Install new bushings and brackets.
2. Before you begin: Ensure the bar can rotate freely, and brackets are not fully tightened until the suspension is at ride height.
3. Step 2: Tighten the stabilizer bar end links to 85 lb-ft (115 N-m).
4. Step 3: With the suspension at ride height, tighten all bracket hardware to 85 lbs-ft (115 Nm).

For further assistance or technical support, please contact our Technical Support team at 1-866-933-2911.

FAQ

• Q: What should I do if I encounter difficulty during installation?
• A: If you face any challenges during installation, please contact our Technical Support team at 1-866-933-2911 for expert assistance.

SUSPENSION STABILIZER BAR BRACKET KIT

• 928-581

BEFORE YOU BEGIN

• Always wear proper safety equipment when performing repairs.
• Ensure at your point of purchase that this part fits your exact vehicle configuration.
• Reference the appropriate service manual for your vehicle. If you do not have a service manual and do not have the training or experience to perform the necessary procedures correctly, seek the services of a qualified technician.

REMOVAL INSTRUCTIONS

STEP 1

• Safely raise the vehicle.

STEP 2

• Remove stabilizer bar links and stabilizer bars from the vehicle.

STEP 3

• Remove stabilizer bar brackets and bushings from the bar. Cut brackets and bushings using a suitable tool. Do not damage the bar.

STEP 4

• Remove bushings and adhesive completely from the stabilizer bar. A razor blade and wire wheel may prove helpful. Prepare with paint as needed.

NOTE: Bar surface must be smooth and free of corrosion, rough surfaces and tool marks before installation or premature bushing wear may occur.

INSTALLATION INSTRUCTIONS

STEP 1

• Install new bushings and brackets.

NOTE: The Bar should be free to rotate and brackets not be fully tightened until the suspension is at ride height.

STEP 2

• Tighten stabilizer bar end links to 85 lb-ft (115 N-m).

STEP 3

• With suspension at ride height, tighten all bracket hardware to 85 lb-ft (115 N-m).

Dorman Products, Inc. Corporate Office and Customer Service: 1-800-523-2492.
Disclaimer: It is impossible in these instructions to account for all possible circumstances or situations that you may experience when attempting to install this product. Please consult with a qualified auto technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Traffic Safety Administration). Be sure that your work is performed under such standards and that you do not disable any motor vehicle safety features.

NEED HELP?

• Please call our Technical Support team for assistance from our team of certified automotive experts. 1-866-933-2911

© 2023 No reproduction in whole or in part without prior written approval. 928-581_Instructions

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>