MASTER HIRE CCTV Security Camera Trailer User Guide
- June 10, 2024
- MASTER HIRE
Table of Contents
MASTER HIRE CCTV Security Camera Trailer User Guide
- Download the free ‘XProtect app’ and put in the user/pass provided by Master Hire. You can scan the QR code above or visit the Apple or Android stores.
ADD SERVER > ADD SERVER
MANUALLY
Name : Master Hire #
Address : mhtrailer#.dyndns.org
8081 8082 (default)
Automatic Connection: TURN OFF
Secure Connection: TURN OFF
User name : your@email.address
Password : Pw!XXXXXX
Save Credentials : ON
Default Server : OFF
Receive Notification : ON
SAVE SERVER SETTINGS
*Red items will be different based on your hire.
-
Place the trailer on site in the desired location.
-
Wind up the most to the desired height and check on the Xprotect app to confirm the camera coverage. The four cameras provide 360 degrees of coverage.
-
If Notifications are required this may incur and extra setup fee and Master Hire will require the following information:
a. which cameras require notifications
b. Site activity hours (e.g. 7am to 5pm Monday to Friday) -
Playback footage:
a. It is best practice to playback footage before the end of hire and within 2 weeks of the event.
Leaving the playback longer than this will risk the footage being overwritten.
b. You can playback footage through the ‘XProtect app’.
The following screenshots are taken from page 49-50 of the
MilestoneXProtectMobileClientUserManual en-US.pdf manual published by the
app vendor Milestone and available from their website.
The system connects via Telstra 4G, there must be Telstra 4G reception in the
area for connectivity to work. The cameras will still record when out of
reception but they will not be contactable until they return to a reception
area.
Find and view video recordings
In playback mode, you can access the recorded video from a camera.
View video recordings from a camera
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>