eleven-X SPS-X Smart Parking Solution Stall Sensor User Manual
- June 1, 2024
- eleven-X
Table of Contents
eleven-X SPS-X Smart Parking Solution Stall Sensor
Product Information
Specifications:
- Product Name: eleven-X SPS-X Smart Parking Solution Stall Sensor
- Model: PRK002001, PRK001002
- Version: 1.0 (2024-03-01)
Product Usage Instructions
Installation:
The sensor can be installed on the parking surface or below the surface.
Surface installation requires high strength adhesive and screws, while
inground installation involves coring a hole in the parking surface, inserting
the sensors, and filling with road grade epoxy. Refer to the eleven-x
installation guide for detailed instructions.
Data Transmission:
The sensor sends parking events over LoRaWAN to the eleven-x eXactPark
analytics platform for data analysis. This allows parking managers to
understand the usage of parking assets. Short-range wireless connectivity
facilitates easy installation, configuration, and maintenance of the sensor.
LoRaWAN Overview:
LoRaWANTM is a long-range wide area network technology that offers low
power consumption, low total cost of ownership, open standard architecture,
long-range connectivity, and robust security features including 128-bit AES
encryption.
Wireless Connectivity:
The sensor provides a low-power, short-range wireless connection to cell
phones for installation, configuration, and maintenance. It can only connect
with the eleven-x cell phone application, which connects to the eleven-x
platform for seamless operations.
Usage:
The parking sensor is suitable for outdoor parking lots, street parking,
and parking structures. Follow the installation instructions provided above
and in the installation manual. Do not
open or modify the PRK001002 subsurface sensor in any way.
FAQ (Frequently Asked Questions):
-
Q: Can the sensor be used indoors?
A: The sensor is designed for outdoor use in parking lots, streets, and structures. It is not recommended for indoor use. -
Q: How long do the batteries last in the sensor?
A: The wireless, battery-powered devices can operate up to 10 years on standard batteries due to low power consumption.
Introduction
The eleven smart parking sensor is an innovative patent-pending LoRaWAN®-based device that utilizes multiple technologies including magnetic sensing, radar, short-range wireless technology and AI that provides:
- Real-time stall occupancy status and monitoring
- Industry leading accuracy based on multiple sensing technologies backed by advanced AI
- Designed and engineered for maximum reliability and robustness
- Leverages standards-based low power wireless technology
- Ultra-long battery life
The rugged sensor is designed to function in all conditions. It can be installed on the parking surface or below the surface. Surface installation is done using a combination of high strength adhesive and screws. Inground installation is achieved by coring a hole in the parking surface, inserting the sensors and filling with road grade epoxy. For details see the eleven-x installation guide.
The sensor sends parking events over LoRaWAN to the eleven-x eXactPark analytics platform where the data provides key analytics and insight to help parking manager understand the usage of the parking assets. Short range wireless connectivity provides easy installation, configuration, and maintenance of the sensor.
LoRaWAN Overview
LoRaWANTM [which stands for long range wide area network], is the undisputed leader in open standard LPWA [low power wide area] networks with deployments globally. The technology is backed by the LoRa Alliance™, which is a global organization comprised of over 500 organizations with the goal of moving IoT forward.
Some of the key features of LoRaWANTM include:
- LOW POWER CONSUMPTION: Wireless, battery-powered devices operate up to 10 years on standard batteries.
- LOW TOTAL COST OF OWNERSHIP: Low-cost battery-powered devices combined with low connectivity and installation fees and little-to-zero maintenance keep overall program costs down.
- OPEN STANDARD: LoRaWANTM is based on open architecture which enables open data environments.
- LONG RANGE: Reliable connectivity in urban and indoor environments with connectivity extending up to approximately 48 km [30 miles].
- SECURITY: LoRaWANTM utilizes 128-bit AES encryption.
For more information, refer to the LoRaWANTM specification.
Wireless Connectivity for Sensor Maintenance
The eleven-x sensor provides a low power, short-range, wireless connection to
cell phones, used by the parking sensor for installation, configuration, and
maintenance. The sensor can only connect with the eleven-x cell phone
application. The phone application connects in the eleven-x platform using the
phones internet connection and provides seamless installation.
Sensor Usage
The parking sensor is for use in outdoor parking lots, street parking and in
parking structures. It is to be installed as described in the above section
and the installation manual.
The PRK001002 subsurface sensor should not be opened or modified in anyway.
The PRK002001 surface mount sensor should only be opened to change the
batteries and should only be done by a trained individual following the
eleven-x battery replacement guide.
Regulatory Information
ISED non-interference disclaimer
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with the Canadian ICES-003 Class B specifications. CAN ICES-003(B) / NMB-003 (B).
ISED RF Exposure statement
This equipment complies with ISED RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm (7.9 inches) between the radiator and any
part of your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. In order to avoid the
possibility of exceeding the FCC radio frequency exposure limits, this
equipment should be installed and operated with minimum distance 20 cm (7.9
inches) between the antenna and your body during normal operation. Users must
follow the specific operating instructions for satisfying RF exposure
compliance.
Contact Information
Please contact your local sales representative or our support team for further
assistance.
Web: https://eleven-x.com/
Email: support@eleven-x.com
Phone: 1-226-887-0011
Legal Notices
The eleven-x products are not designed, manufactured or intended for use, and
should not be used, or sold or re-sold for use, in connection with
applications requiring fail-safe performance or in applications where the
failure of the products would reasonably be expected to result in personal
injury or death, significant property damage, or serious physical or
environmental damage. Examples of such use include life support machines or
other life preserving medical devices or systems, air traffic control or
aircraft navigation or communications systems, control equipment for nuclear
facilities, or missile, nuclear, biological or chemical weapons or other
military applications (“Restricted Applications”). Use of the products in such
Restricted Applications is at the user’s sole risk and liability.
ELEVEN-X DOES NOT WARRANT THAT THE TRANSMISSION OF DATA BY A PRODUCT OVER A
COMMUNICATIONS NETWORK WILL BE UNINTERRUPTED, TIMELY, SECURE OR ERROR FREE,
NOR DOES ELEVEN-X WARRANT ANY CONNECTION OR ACCESSIBILITY TO ANY
COMMUNICATIONS NETWORK. ELEVEN-X WILL HAVE NO LIABILITY FOR ANY LOSSES,
DAMAGES, OBLIGATIONS, PENALTIES, DEFICIENCIES, LIABILITIES, COSTS OR EXPENSES
(INCLUDING WITHOUT LIMITATION REASONABLE ATTORNEYS FEES) RELATED TO TEMPORARY
INABILITY TO ACCESS A COMMUNICATIONS NETWORK USING THE PRODUCTS.
The eleven-x products and the final application of the eleven-x products
should be thoroughly tested to ensure the functionality of the eleven-x
products as used in the final application. The designer, manufacturer and
reseller has the sole responsibility of ensuring that any end user product
into which the eleven-x product is integrated operates as intended and meets
its requirements or the requirements of its direct or indirect customers.
eleven-x has no responsibility whatsoever for the integration, configuration,
testing, validation, verification, installation, upgrade, support or
maintenance of such end user product, or for any liabilities, damages, costs
or expenses associated therewith, except to the extent agreed upon in a signed
written document. To the extent eleven-x provides any comments or suggested
changes related to the application of its products, such comments or suggested
changes is performed only as a courtesy and without any representation or
warranty whatsoever.
This publication or any portion thereof may not be reproduced or used in any
matter whatsoever without the specific and express prior written permission of
eleven-x Incorporated.
eleven-x Incorporated makes no representations or warranties, whether express,
implied or by estoppels, with respect to the content, information, material
and recommendations herein and specifically disclaims any implied warranties
of merchantability, fitness for any particular purpose and noninfringement.
eleven-x Incorporated reserves the right to revise this publication and to
make changes from time to time in the content hereof without obligation of
eleven-x Incorporated to notify any person or organization of such revisions
or changes.
eleven-x, and the eleven-x logo are registered trademarks of eleven-x
Incorporated. All other products and technologies are the trademarks or
registered trademarks of their respective holders.
© Copyright 2024 eleven-x Inc. All Rights Reserved.
References
- eleven-x Smart Parking Systems | eleven-x
- eleven-x Smart Parking Systems | eleven-x
- eleven-x Smart Parking Systems | eleven-x
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>