MALMBERGS 27 004 90 AP Mode App Instruction Manual

: June 1, 2024
: MALMBERGS

Table of Contents

MALMBERGS 27 004 90 AP Mode App
Product Information
Product Usage Instructions
Verifying Network Connectivity
Introduction
Reset Network Setting
Documents / Resources

MALMBERGS 27 004 90 AP Mode App

MALMBERGS-27-004-90-AP-Mode-App-PRODUCT

Product Information

Specifications

Model: X
Serial Number: 27 004 90
AP Mode Manual
Languages: DK, EN, FI, NO, SE

Product Usage Instructions

Network Configuration

AP Mode allows you to configure WiFi to the charger without a Bluetooth connection.

Follow the steps below to connect the charger to the platform:

Step 1: Network Connection

Switch your phone to flight mode.
Ensure WiFi is enabled.
Select the network with a name beginning with SN…, which matches the charger’s serial number.
Enter the default WiFi password: admin123.

Step 2: Login

Select a browser.
Enter the default IP address: 192.168.4.1.
Enter the 4-digit network password (PIN code provided).

Step 3: WiFi Setup

Click on Network Setup.
Select WiFi Setup and enter the desired WiFi name and password.
Enter the server address.

Verifying Network Connectivity

After re-logging in, ensure WiFi Strength is Excellent, Server Status is Connected, and Network Status is Online. If issues arise, troubleshoot accordingly.

Mode Switch

Click Charger Setup, then Mode Switch.
Select Plug and play mode.
Confirm the selection.

Set Max Current

Click Max Charging Current.
Select the desired value.

Reset Network Setting

To reset network settings, follow the instructions provided on the product interface.

Frequently Asked Questions (FAQ)

What is the default WiFi password?

The default WiFi password is admin123.

How can I reset the network settings?

To reset network settings, follow the instructions provided in the user manual or interface of the product.

Introduction

AP Mode allows you to configure WiFi to the charger without a Bluetooth con- nection. The instructions below show how to connect the charger to the plat- form.

Network Configuration

Network connection

Please follow the steps below to connect to the network.

Step 1: WiFi Connection

a. Switch your phone to flight mode.
b. Make sure the WiFi is on.
c. Select network. The name of the network begins with” SN…..”, it is the same as the charger’s serial number.
d. Enter the WiFi password.
Default password: admin123

Step 2: Login

e. Select a browser.
f. Enter the device’s IP address.
Default IP address: 192.168.4.1
g. Enter the 4-digit network password.
Please check the PIN code at the bottom of this page.
Note: If you can’t enter the login interface via the default IP address, make sure you are connected to the correct hotspot.

Step 3: WiFi Setup

h. Click “Network Setup”
i. WiFi Setup. You can select any WiFi name that you want. When you have entered the server address, the SN code will display automatically, please select “Other”and enter the WiFi information if it is not in your WiFi list.
Note: After WiFi setup, you need to repeat step c to log in again.
Customers can only choose Wi-Fi to connect to the Network.
j. Verifying Network Connectivity
After re-login, please make sure the WiFi Strength is Excellent, the Server Status is Connected, and the Network Status is Online.
If the WiFi Strength is Poor, please try to change the WiFi.
If the Server Status is Disconnected or the Network Status shows offline, please try to reset the network setting, then repeat steps 2 and step 3.

Mode Switch

a. Click “Charger Setup”, then click “Mode Switch”.
b. Select “Plug and play mode”.
c. Click “Confirm”.

Set Max Current

a. Click “Max Charging Current”.
b. Select the value that you want.

Note: This feature is designed for offline scenarios, you can also set the charging current in the APP Evchargo if the charger is online. MALMBERGS-27-004-90-AP-Mode-App-FIG-7

Reset Network Setting

Please click A to reset network settings, and click B to confirm. MALMBERGS-27-004-90-AP-Mode-App-FIG-8

If you reset all data, the charger will go back to the factory setting.
Malmbergs Elektriska AB, PO Box 144, SE-692 23 Kumla, SWEDEN Phone: +46 19 58 77 00info@malmbergs.com [www.malmbergs.com](http://www.malmbergs.com)