MALMBERGS MD-991 6w Led Light Light White Instruction Manual
- June 9, 2024
- MALMBERGS
Table of Contents
MALMBERGS MD-991 6w Led Light Light White Instruction Manual
Read these instructions before starting the installation and hand it over to the user when finished.
Safety Instructions
- The luminaire must be installed by a qualified electrician and according to existing regulations.
- The manufacturer is not liable for damage or malfunction caused by improper handling of the luminaire.
- The luminaire must not be modified.
- Please acknowledge that light from LED is very bright, please do not look directly into the LED light.
- You may replace electrical accessories such as cables, lamp holders and plugs of movable appliances, and also wall sockets and switches in fixed installations, if you know how to. Incorrect installation may result in fire and/or serious personal injury.
- CAUTION! Turn off the power, remove the fuse from the distribution box or set the MCB to the “OFF” position, before starting any installation work.
- Make sure that moisture does not come in contact with any live parts.
- Plugs and terminals must be free from tension and torsion forces.
- NOTE! The light source cannot be replaced. If the LED diode(s) fails, the whole luminaire must be replaced.
Installation
Make sure that electrical wires are not damaged during installation.
Electrical safety classification: Class I This luminaire has to be
connected to earth with the green/yellow wire.
Electrical safety classification: Class II This luminaire is double insulated and must not be connected to earth terminal.
Designation of terminals: L – live, N – neutral, – earth. The specified voltage (230-240V/50Hz) must not be exceeded.
Symbol for Separate Collection
This symbol indicates that this product is to be collected separately.
The following apply:
- This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
- For more information, contact the local authorities in charge of waste management.
By providing these materials for recycling, you contribute substantially to protect the environment.
Installation Instruction
L80: 80% of lumen output remains after 50 000 hrs. B10: 90% of the luminaires
will meet the declared L value.
Dimmable with RC dimmer
NOTE! Replacement of light source and control gear is not appropriate for this product due to its technical and functional restrictions.
Do not cover with insulating material
EMC Standard (EMC)
EN 55015: 2013:2013 +A1: 2015
EN 61547: 2009
EN 61000-3-2: 2014
EN 61000-3-3: 2013
Safety Standard (LVD)
EN 60598-2-2: 2012
EN 60598-1: 2015+A1:2018,
EN 62493: 2015
EN 62031: 2008 + A1: 2013 + A2:2015
EN 62471: 2008
RoHS Standard (RoHS)
IEC 62321-5 Edition 1.0: 2013
IEC 62321-7-1 edition 1.0: 2015
IEC 62321-7-2 Edition 1.0: 2017
IEC 62321-6 edition 1.0: 2015
IEC 62321-8 Edition 1.0: 2017
Declaration of Conformity
We hereby certify that the device satisfies the provisions for CE/Intertek markings in accordance with the EU directives (LV Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU, (EU) 2015/863) as described in this manual.
For and on behalf of:
Malmbergs Elektriska AB, Sweden.
Mr. Anders Folke / Product Manager
Date: 16/05/2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>