BESTZHEYU 2500 LED Rear Bumper Instruction Manual
- June 1, 2024
- BESTZHEYU
Table of Contents
2500 LED Rear Bumper
“`html
Product Specifications:
- Part Number: SI25-HG01
- Fit: Chevy Silverado 2500/3500 2015-2017
- Components Included:
- 1 Rear Bumper
- 1 Driver Side Mounting Bracket
- 1 Passenger Side Mounting Bracket
- 4 Hex Head Bolts M12x1.75x35mm
- 12 Hex Head Nuts M12x1.75
- 12 Split Washers M12
- 12 Flat Washers M12
- 2 LED Markers
- Tools Needed:
- Socket Drive
- 21mm Socket
- 13mm Wrench
- 15mm Socket
- 18mm Deep Socket
- 19mm Wrench
Product Usage Instructions:
Installation Steps:
-
Identify the components included in the package.
-
Use the provided tools to assemble the rear bumper according to
the instruction manual. -
Mount the driver and passenger side brackets using the
specified bolts and washers. -
Secure the rear bumper in place with the appropriate
hardware.
Electrical Installation:
The rear bumper comes with LED lights that require connection to
a power source. Follow these steps:
-
Ensure the vehicle’s power source is turned off before making
any connections. -
Connect the LED lights to the power source following the
provided wiring instructions. -
If you are unsure about electrical connections, seek
professional help to avoid damage or injury.
Frequently Asked Questions (FAQ):
Q: Can I install the rear bumper without connecting the LED
lights?
A: Yes, you can install the rear bumper without connecting the
LED lights. However, it is recommended to complete the electrical
installation for full functionality.
Q: What should I do if I encounter difficulties during
installation?
A: If you face challenges during installation, refer to the user
manual for detailed instructions. You can also contact our customer
support for assistance.
“`
r-
KEY TO COMPONETS A. 1 ea. Rear bumpe B. 1 ea. Driver side mounting bracket C. 1 ea. Passenger side mounting bracket D. 4 ea. Hex head bolts M12x1.75x35mm 12 ea. Hex head nuts M12x1.75 F. 12 ea. Split Washer M12 G. 12 ea. Flat washer M12 H. 2 ea. LED markers
TOOLS NEEDED Socket drive 21mm socket 1 3mn wrench 15mm socket 18mm deep socket 19mm wrench
LED Rear Bumper Installation Instructions
PART NUMBER SI25-HG01 FlSCHEVY SILVERDO 2500/3500 1 5-17
…
qj
Please take a few minutes to read and thoroughly familiarize yourself with the
installation Pocedures outlined in this manual. Following the steps as
outlined will save you time and help reduce mistakes. Once the instructions
are reviewed, if you feel that you are not capable of safely installing the
parts seek the help of a qualified installation expert to help you complete
the job. The manufacture is in no way responsible for any personal injury or
vehicle damage that may occur during the installation.
ELECTRICAL INSTALLATION
&. The rear bumper comes complete with LED lights which need to be connected
to a power source. Failure to properly make these connections could result in
damage to the LED lights and/or your vehicle and may result in personal
injury. If you are not qualified to make the proper connections, we highly
recommend that you contact an installation expert to complete the connections.