MW MPM-10-24 Switching Power Supply Instruction Manual
- June 1, 2024
- MW
Table of Contents
MW MPM-10-24 Switching Power Supply
Features
- 1.8″x1″ compact size
- Medical safety approved (2 x MOPP) according to
- ANSI/AAMI ES60601-1 and IEC/BS EN/EN60601-1
- Suitable for BF application with appropriate system consideration
- No load power consumption <0.075W
- Extremely low leakage current
- Wide operating temp. range -30 ~ +85°C
- EMI Class B for class Il configuration
Protections
- Short circuit / Overload / Over voltage / Over temperature
- No minimum load required
- 3 years warranty
Applications
- Portable medical device
- Mobile clinical workstation
- Medical computer monitor
- Medical examination instrument
GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx
Description
MPM-10 is a 10W high-density and small size (45.725.421.5mm) AC/DC module type medical grade power supply series offered in pin type. It features the operation for 80~264 VAC, a low no-load power consumption of less than 0.075W, a high efficiency of up to 84%, Class II (no FG) double insulation, outstanding dissipation and a high lifespan thanks to the interior potting, 5G anti-vibration, high EMC performance, 4KVAC isolation, etc. The design observes IEC/BS EN/EN60601-1 and ANSI/AAMI ES60601-1 version three with 2xMOPP level and ultra-low leakage current (<80 u A). It is very suitable for BF (patient contact) type medical devices or relevant equipment.
SPECIFICATION
Block Diagram
Derating Curve
Output Derating VS Input Voltage
Mechanical Specification
Installation Manual
Please refer to: http://www.meanwell.com/manual.html