MW Glance 20220818 GLANCE Pro Touch Screen Monitor User Manual

For Anywhere Takes You
20220818 GLANCE Pro Touch Screen Monitor
User Manual

Safety Precautions

1. Read all warnings and follow all instructions . Keep this user guide for later reference.
2. Do not use this device near water. To reduce the risk of fire or electric shock. do not expose the device to moisture.
3. Do not place the device on an uneven or unstable surface. The device may fall over resulting in an injury or malfunction.
4. Avoid exposing the device to direct sunlight or other sources of sustained heat.
5. Always use genuine Mobile Pixels components to ensure safety and product performance.
6. To avoid the risk of electric shock or component damage. switch oft the power before connecting other components to the display.
7. Disconnect the power plug from the AC outlet if the device wil I not be used for a long period of time.
8. When connecting to a power outlet. DO NOT remove the grounding prong. Please ensure grounding prongs are NEVER REMOVED.
9. Place the device in a well-ventilated area. Do not place anything on the device that prevents heat dissipation.
10. The power adaptor must be replaced when using different voltage from that specified in the User Guide. For more information. please contact us.
11. Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
12. Do not apply pressure to the screen. Excessive pressure may cause permanent damage to the display.
13. Plastic bags can be dangerous. Keep plastic bags away from babies and children to avoid danger of suffocation.
14. Do not attempt to repair the product by yourself. Opening the back cover may expose you to high voltages. the risk of electric shock. and other hazards. If repair is required. please contact us anytime.
15. If there are visual smoke or sparks. unplug the power cord and contact us. Do not try to repair the product yourself.
16. To avoid risk of electric shock . do not touch the power plug and ports with wet hands.

What is in the box

Adjustable angle 0° 180°

1. Take out the monitor from the packaging and place it on a stable and level workspace.
2. Open or close the base. The viewing angle of the monitor can be adjusted using the stand. (As shown below, adjustable angle 0° – 180°)

Connect the monitor to your computer

1. Plug the adaptor of you monitor into a nearby electrical outlet.

2. Use the adaptor to connect to the monitor’S Port 2.

3. Connect Type-C Cable (Only Type-C-input model)
   a. Connect the Type-C Cable to the computer.

4. Conner Mini HDMI Cable (One HDMI-input model)
   a. Connect the Mini HDMI cable to the computer.

*Please make sure to use the original MobilePixels accessories in order to preserve the quality- aspects.

External Controls

menu.
b.Long press this button to adjust the volume.
2| | Down| Press this button to select the desired item when in OSD menu.
3| | Power Button| Long press for 3 sec to turn on/off Monitor.
4| | LED Indicator| Blue indicates power on. Blinking Blue indicates standby mode.

OSD(On-Screen Display) Menu

Powering On & Off
Press and hold the power button for 3 seconds to turn the monitor ON and off. The monitor will enter power saving mode when turned on unless is a suitable device connected.
Volume Up & Down

Press and hold the & up button to enter Volume Adjustment.
Then adjust the volume with the & Up button (volume increase) and Down button (volume decrease).

Quick Menu Backlight

1. Press any key to enter the quick menu.
2. Using the Up button, select Backlight from the menu.
3. Use the Up and Down buttons to adjust the backlight between 0-100.
4. Press Power button to confirm and exit the menu, or wait 3seconds without pressing any button.

Input source

1. Press any key to enter the quick menu.
2. Using the power button open Input Source from quick menu. to select a USB-C or Mini-HDMI input source.’
3. When you are done. use the Power button to confirm and exit.”

OSD

Powering On/Off
The following content is for general reference only.The actual product specific -ions may vary. The on-screen display (OSD) can be used for adjusting the settings of your monitor. Press any button to open the Navigation OSD.You can use the OSD to adjust the picture quality.OSD setting and general settings. Please Up and Down buttons to navigate the OSD menus, and power button to confirm selection.”
Contrast

1. Press any key to enter the quick menu.
2. Using the Up button, select Contrast from the menu.’
3. Use the Up and Down buttons to adjust the Contrast between 0-100.
4. Press Power button to confirm and exit the menu, or wait 3 seconds without pressing any button.”

Color Temperature Setting
The colour temperature adjustment Warm-Normal-Cool corresponds to the colour temperature of 6500K. 7500K. 9300K and the User mode has a three.

Mobilepixels.us

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>