TUCKER BARVECUES R CLASS AND GTR 304 Stainless Steel Deluxe Side Shelves Instruction Manual

TUCKER BARVECUES R CLASS AND GTR 304 Stainless Steel Deluxe Side Shelves

Product Information: 304 Stainless Steel Deluxe Side Shelves

The 304 Stainless Steel Deluxe Side Shelves are designed to be attached to the BBQ cabinet or trolley for additional workspace and convenience. These side shelves are compatible with models R Class and GTR. Made from high-quality 304 stainless steel, these shelves are durable, corrosion-resistant, and easy to clean.

Assembly Instructions

Tools Required for Assembly:

• 10mm spanner
• Phillips head screwdriver

Shelf Parts:

• 2 x Shelf
• 2 x Shelf Arm
• 2 x Left Side Bracket
• 8 x Countersunk M6 x 35mm Bolts
• 4 x 6mm Bolts
• 8 x Nuts
• 4 x Spacers
• 4 x Washers
• 2 x Right Side Bracket

Cabinet/Trolley Shelf Assembly:

1. First, fit the two shelf brackets supplied with the shelves onto each side of the BBQ using the bolts provided.
2. Bolt the handles to the end of the side shelf.
3. Now position the side shelf in between the two shelf brackets. Using the bolt, spacer, and nut, attach the shelf onto the brackets.
4. The shelf brackets should mirror each other on the front and back of the BBQ. Ensure that the bolts are carefully lined up as they screw into nuts welded inside the sides of the BBQ Body.
5. The holes in the brackets are oversized and may require a washer to be fitted to prevent the head of the nuts from pulling through the holes in the brackets.
6. Push the bolt through the hole in the shelf bracket first and then through the slot in the side of the shelf. Slide the spacer over the bolt and into the slot in the shelf. Tighten the nut. The spacer allows you to tighten the nut firmly while still allowing the shelf to fold up and down.

After assembly is complete, the side shelves will look like the photo provided.
TUCKER AUSTRALIA PTY LTD. 138 Silverwater Road, Silverwater NSW 2128 AUSTRALIA.
PHONE: (+612) 9748 8368 FAX: (+612) 9748 8138
WEB SITE: www.tuckerbbq.com.au
EMAIL: mail@tuckerbbq.com.au

ASSEMBLY, INSTALLATION AND OPERATING INSTRUCTIONS
DELUXE SIDE SHELVES 304 STAINLESS STEEL
MODELS : R CLASS AND GTR

IMPORTANT – PLEASE READ ALL INSTRUCTIONS BEFORE YOU ASSEMBLE, INSTALL OR OPERATE THIS APPLIANCE.

TOOLS REQUIRED FOR ASSEMBLY

• 10mm spanner
• Phillips head screwdriver

1. Remove any plastic film protecting or covering any parts of the Shelves before assembly.
2. Cut away any packaging or cable ties that may be holding components in place.
3. Check you have all the correct components as listed below.

SHELF PARTS

CABINET/ TROLLEY SHELVE ASSEMBLY

1. First fit the two shelf brackets supplied with the shelves onto each side of the BBQ with the bolts provided.

2. The shelf brackets should mirror each other on the front and at the back of the BBQ as per the photo below. The bolts need to be carefully lined up as they screw into nuts welded inside the sides of the BBQ Body.
   NOTE
   The holes in the brackets are oversized and may require a washer to be fitted to avoid the head of the nuts from pulling through the holes in the brackets

3. Bolt the handles to the end of the side shelf.

4. Now position the side shelf in between the two shelf brackets and using the bolt, spacer and nut, attach the shelf onto the brackets. NOTE
   Push the bolt through the hole in the shelf bracket first and then through the slot in the side of the shelf. Now slide the spacer over the bolt and into the slot in the shelf and tighten the nut. The spacer allows you to tighten the nut up firmly yet still allowing the shelf to fold up and down. After assembly is complied, the side shelves will look like the below photo.

TUCKER AUSTRALIA PTY LTD.
138 Silverwater Road
Silverwater NSW 2128 AUSTRALIA.
PHONE: (+612) 9748 8368
FAX: (+612) 9748 8138
WEB SITE: www.tuckerbbq.com.au
EMAIL : mail@tuckerbbq.com.au

References

• BBQ Shop - Tucker Barbecues the Best Stainless Steel BBQs Australia

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>